Pump Set B2 Battery SS with rotor
Drum Pump Sets
Description
Immersion length: 500 mm (sealless) suitable for filling from small vessels such as canisters or hobbocks Conditionally safe to run dry For thin-bodied fluids e.g. Glycols, oil-based lubricants, trichloromethane, butyl glycol, cleaner solvent, motor oils etc. Features : Infinitely variable speed controller allows a controlled filling of smaller and larger liquid amounts Automatic switch-off at overload Replaceable with Li-Ion technology Wear-free, low noise BLDC motor Lube free pump tube, thus no contamination of the liquid Optimized drum drainage Modular, service friendly design Wide range of applications possible due to sealless construction Service-friendly and simple to dismantle Axial-flow rotor (R) for higher flow rates Benefits : Variable flow rate for a convenient and safe transfer High battery capacity Long service life due to BLDC motor Sealless construction (MSL) cannot fail by dry running Lube-free pump tube, thus no contamination of the liquid.
Product characteristics
- Motor
- SS with rotor
- Performance
- 70 watts (internally ventilated)
- Voltage
- 21.6 V
- Capacity
- 4 Ah
- Housing
- Stainless steel (1.4571)
- Bearing
- ETFE/PTFE
- Drive shaft
- Stainless steel (1.4571)
- Seals
- ohne
- Mechanical seal
- ohne
- Impeller
- ETFE
- Type of impeller
- Rotor
- Temperature of medium
- -15 bis +90 °C
- Immersion tube diameter
- 28 mm
- Immersion depths
- 500 mm
- Weight
- 4.4 kg
- Delivery rate
- max. 80 l/min. (45 l/min.)
- Delivery head
- max. 8 m wc
- Viskosity
- max. 400 mPas
- Density
- 1.6 kg/dm³
Similar products from LUTZ PUMPEN GMBH
LUTZ PUMPEN GMBH
Germany
The pump set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. acetic acid etc. * Pump unit equipped with Lutz original handwheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & benefits * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants lubricants * Optimised drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
LUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
LUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
LUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.