Belgium
Distributor
Belgium
Useful cooling output 1,500 W. The cooling unit may be attached to the enclosure in 3 positions (external, partial internal and full internal mounting). The energy-efficient wall-mounted cooling unit Blue e+ Outdoor can be used worldwide, thanks to its multi-voltage capability, and is suitable for use with Toptec project solutions, for example Average 75% energy savings thanks to speed-regulated components and heat pipe technology Longer service life of the components inside the enclosure and the cooling unit due to component-friendly cooling Intuitive operation due to touch display and intelligent interfaces SK Blue e+ cooling unit, wall-mounted, outdoor, 1.6 kW, 110 – 240 V, 1~, 380 – 480 V, 3~, 50 – 60 Hz, aluminium, WHD: 400 x 950 x 310 mm
Request for a quoteBelgium
Sheet steel section doors for the installation of climate control module types SK 3307.7XX to 3310.7XX. Sheet steel section doors for the installation of climate control module types SK 3307.7XX to 3310.7XX. SK modular climate control concept, Section doors, for TS8 WH: 600 x 1800 mm
Request for a quoteBelgium
Air/water heat exchanger in TS 8 baying system, useful cooling output 10 kW. Air/water heat exchangers in TS 8 baying system, to fit 600 or 800 mm deep and 2000 mm high TS 8 enclosures. Air outlet either with 5 kW on each side or 10 kW on one side only. Flexible water connection options on the top or bottom of the unit. SK Liquid Cooling Package, Air/water heat exchanger in TS 8 baying system, 9.5 kW, 230 V, 1~, 50/60 Hz, Water-carrying parts: copper/brass , WHD: 300 x 2000 x 600 mm
Request for a quoteBelgium
We can help boost the efficiency of your plant design with original CAD data for Rittal components, whichever CAD system you are using. We can help boost the efficiency of your plant design with original CAD data for Rittal components, whichever CAD system you are using. Benefits for users • All CAD data can be transferred into all common CAD systems thanks to the smart, native, 2D/3D multiCAD-compatible format. • The accurately detailed and validated drawings allow users to generate design drawings with maximum planning confidence, in a fraction of the time taken for conventional design, by simply remodelling. • Because the level of detail in CAD models is freely selectable, thy may be represented in a greatly simplified format, thus boosting users’ performance significantly.
Request for a quoteBelgium
Functions Overview The new, simple dimension in configuration The Rittal Configuration System is a new dimension in configuration for "Rittal - The System" Simply select your preferred enclosure system and start configuring your enclosure. You can track the progress of your configuration at any time with 3D visualisation. To display prices for your configuration, log in directly to the online shop before you start. • Error-free configuration of products and accessories • Plan cut-outs and drilled holes • The outcome • Enquire about a configuration or order directly online Your benefits • Simple selection of enclosures and accessories • Time-saving configuration and planning • Error-free selection of accessories, and planning of cut-outs and drilled holes • Real-time visualisation of the configuration in 3D • Automatic generation of manufacturing documents/data • Enormous time savings with planning, by providing a CAD file of the entire configuration
Request for a quoteBelgium
The small enclosure KX, terminal box KX, without a gland plate allows for flexible interior installation while maintaining a high protection category. The small enclosure KX, terminal box KX, without a gland plate allows for flexible interior installation while maintaining a high protection category. KX Terminal box, WHD: 150x150x120 mm, sheet steel, without mounting plate, with cover, without gland plate.
Request for a quoteBelgium
System perfection. The new compact enclosure AX (sheet steel) offers maximum data quality and consistency in engineering, and flexibility and safety in assembly and interior installation. AX Compact enclosure, WHD: 380x300x210 mm, sheet steel, with mounting plate, single-door, with one cam lock
Request for a quoteBelgium
Outdoor enclosure with 100 mm transport plinth and rain canopy with projections on all sides. Side panels, rear panel and door fully double-walled on the outside, the entire TS 8 frame is available for interior installation. Outdoor enclosure with 100 mm transport plinth and rain canopy with projections on all sides. Side panels, rear panel and door fully double-walled on the outside, the entire TS 8 frame is available for interior installation.
Request for a quoteBelgium
Enclosure solution tailored to the requirements of the food and luxury goods industry. Roof angled forwards by 30°. Seal dyed blue to clearly distinguish it from foodstuffs HD Compact enclosure, WHD: 220x350(H1)x437(H2)x155 mm, Stainless steel 1.4301, with mounting plate, with hinged door and silicone seal
Request for a quoteBelgium
Aluminium enclosure, high thermal conductivity for optimum passive heat dissipation. Low weight coupled with high stability. Protection category IP 65 to IEC 60 529. CP Compact Panel, for front panel BH 520x400 mm, installation depth 74 mm, Extruded aluminum section, Support arm connection 120x65 mm, Hinged rear panel with screw lock
Request for a quoteGermany
the economical alternative Replacement for STRATE 1DF2 and 2DF2 pump controllers suitable for connection to all STRATE fill level recording systems: contact-based or contactless the 2DF2 plus also handles dual level measurement: Sensor/pilot tube and sensor/contactor for outstanding operational reliability the current level and operating hours are always shown on the display
Request for a quoteGermany
2DFmaster AWAcontrol control system for STRATE sewage pumping stations with two pumps each and an installed overall motor rating of 0.75 kW to 75 kW each. Particularly suitable for building services engineering and municipal applications (twin systems), offers outstanding ease of use and functionality of the AWAmaster technology also for pumping capacities over 4 kW. LCD plain text display Thermal and electrical motor monitoring Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free All settings and fault messages retained after power failure Operating hours counter High resistance to interference Simple operation Level recorded either by internal pressure transducer, external 4 – 20 mA probe or float switch
Request for a quoteGermany
Compact control systems with micro-processor technology for controlling STRATE sewage pumping stations with two pumps each and an installed motor rating of up to 5,5 kW per pump. Particularly suitable for building services engineering (twin systems) and do not require a separate control cabinet. Compact control system AWAmaster 2 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole Parallel operation of both pumps to cope with increased sewage volume (e.g. during heavy rain) LCD plain text display Thermal and electrical monitoring of the motors Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free
Request for a quoteGermany
The compact control system with micro-processor technology for controlling STRATE sewage pumping stations with one pump and an installed motor rating of up to 5,5 kW. Particularly suitable for building services engineering (single systems) and do not require a separate control cabinet. Compact control system AWAmaster 1 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole LCD plain text display Thermal and electrical monitoring of the motor Manual – 0 – Automatic function Pump switch-off through time or switch-off point Acknowledgement button Operating hours counter Ammeter Electronic monitoring of the motor current Forced pump switch-on Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Flood alarm potential-free All settings and fault messages retained after power failure (battery back-up not required) Reserve inputs for float switch, telecontrol module
Request for a quoteCreate one request and get multiple quotes form verified suppliers.