RIZOLIN LLC - Roofing materials manufacturer

Russia

Factory icon Manufacturer/ Producer

RIZOLIN LLC
Web icon
Contact

Russia

Rizolin FSa is made of tearproof reinforcing fiberglass cloth impregnated with bitumen-polymeric compound with a protective aluminium foil layer. The material is absolutely waterproof, resistant to rapid temperature changes, bioresistant. Due to protective aluminium foil layer the material is resistant to ultraviolet impact and corrosive environment that allows to maintain its waterproofing properties permanently.

Russia

Rizolin FSa is made of tearproof reinforcing fiberglass cloth impregnated with bitumenpolymeric compound with a protective aluminium foil layer. The material is absolutely waterproof, resistant to rapid temperature changes, bioresistant. Due to protective aluminium foil layer the material is resistant to ultraviolet impact and corrosive environment that allows to maintain its waterproofing properties permanently. Can be used in all climatic zones (according to SNiP 230199).The material is easy in application and does not require any special equipment. To apply Rizolin FSa one must only take off the release film, place the material onto a dry, dustfree surface and roll it down with a roller. (SNiP 3.04.0187).

Russia

Rizolin FSm is PREMIUM CLASS material. It is made of durable reinforcing fiberglass cloth impregnated with bitumenpolymeric compound with a protective copper foil layer. The material is absolutely waterproof, resistant to rapid temperature changes. Due to protective copper foil layer the material is resistant to ultraviolet impact and corrosive environment that allows to maintain its waterproofing properties permanently. During the usage, the copper surface will be covered with a patina that gives the building a noble look.The material is easy in application and does not require any special equipment. To apply Rizolin FSm one must only take off the release film, place the material onto a dry, dustfree surface and roll it down with a roller. ATTENTION Selfadhesive material properties retain at an air temperature above +15 °С. At lower temperatures a little heat must be applied to the adhesive side till the appearance of high luster in order to ensue the adhesiveness.

Russia

The material is made of durable reinforcing fiberglass cloth on both sides impregnated with bitumenpolymeric compound with targeted additives that improve its operating abilities. The material is absolutely waterproof, resistant to rapid temperature changes and mechanical influences; bioresistant. Can be applied in all climatic zones (according to SNiP 230199).The material is easy in application and does not require any special equipment. To apply Rizolin AS one must only take off the release film, place the material onto a dry, dustfree surface and roll it down with a roller. (SNiP 3.04.0187) ATTENTION Selfadhesive material properties are retained at an air temperature above +15 °С. At lower temperatures a little heat must be applied to the adhesive side till the appearance of high luster in order to ensue the adhesiveness (SNiP II 2676*).

Russia

Bitumen and polymeric, selfadhesive from both sides material reinforced by polyester. The material is waterproof, resistant to punching, mechanical influences, bioresistant. During usage the asphalt binder layer is not polymerized. Hence, waterproofing properties are maintained permanently.The material is easy in application and does not require any special equipment. To apply Rizolin PARKING one must only take off the release film, place the material onto a dry, dustfree surface and roll it down with a roller. ATTENTION Selfadhesive material properties retain at an air temperature above +15 °С. At lower temperatures a little heat must be applied to the adhesive side till the appearance of high luster in order to ensue the adhesiveness.

Russia

The material is aimed to protect heat insulation and building structures from water vapor from inside of the room. It is used to install vapor barriers on all kinds of roofs, garret floors, interfloor overlappings, basement floors; frame walls, floors (on concrete bottoms) combined with different materials and heat insulators. RIZOLIN Vapor Barrier is made of retained polyester cloth or fiberglass cloth impregnated with waterproofing bitumenpolymeric compound. The material blocks condensation during cold periods of the year and moisturization of heat insulator. Also, it blocks fungal contamination and corrosion of construction units.The material is easy in application and does not require any special equipment. To apply RIZOLIN Vapor Barrier one must only take off the release film, place the material with overlap onto a dry, dustfree surface and roll it down with a roller (according to SNiP 3.04.0187).

Russia

Rizolin FLOORA is a rolled material, adhesive from both sides. It is made of bitumenpolymeric compound based on durable reinforcing fiberglass cloth. Adhesive sides of the material are protected against adhesion by release film. The material is waterproof, resistant to mechanical influences, bioresistant.The material is easy in application and does not require any special equipment. Track beds are laid into seams on a dry dustfree surface. For better waterproofing seams are filled with selfadhesive sealing tape Rizolin AS100. For final floor covering application it is necessary to take off the protective release film from the upper adhesive layer of the cloth. ATTENTION The works with the material can be done at an average daily temperature above +10°С. At lower temperatures (up to 10°С) it is recommended to heat the material a little with a heat gun from the adhesive side till the appearance of high luster.

Russia

Rizolin FLOORU application gives an opportunity to effectively localize undesirable noises and vibrations, as well as solving the problem of waterproofing and heat insulation of indoor spaces. The material is used for application of acoustical blanket and waterproofing in “floating floor” construction; — as a multipurpose adhesive base under laminate, parquet, batten and paving tile in accommodation units; have awaterproofing and acoustic insulation for screed coat in accommodation units; — as an adhesive base sheet under the floor tile in trading, production, public spaces hotels, health care facilities, sports centers; in floor constructions for decreasing the level of impact noise and other kinds of noise; for structural units protection and protection of buildings against vibrations, as well as for waterproofing of premises.Rizolin FLOORU is made of bitumenpolymeric compound based on durable reinforcing fiberglass cloth.

Russia

Used for acoustic, vibration insulation of vehicles; in ventilation systems of trading spaces, production facilities, public spaces, communication lines.RIZOLIN Sound Insulation is a selfadhesive bitumenpolymeric material with an additional sound insulation made of foamed polyethylene. The material is waterproof, resistant to vibrations and mechanical influences, bioresistant.To apply Rizolin Sound Insulation it is enough to take off a release film, press the material to a dry and degreased surface and roll it down with a roller. Track beds are laid in seams, with the bitumen and polymeric side to the base. ATTENTION Selfadhesive material properties retain at an air temperature above +10°С. If faulty adhesion has occurred the material can be heated from adhesive side till appearance of high luster.

Russia

Used for acoustic, vibration insulation of vehicles; in ventilation systems of trading spaces, production facilities, public spaces, communication lines.RIZOLIN Sound Insulation F is a selfadhesive bitumen and polymeric material with additional degree of protection made of aluminium foil. The material is waterproof, resistant to vibrations and mechanical influences, bioresistant.To apply Rizolin Sound Insulation — F it is enough to take off a release film, press the material to a dry and degreased surface and roll it down with a roller. Track beds are laid in seams, with the bitumen and polymeric side to the base. ATTENTION Selfadhesive material properties retain at an air temperature above +10°С. If faulty adhesion has occurred, the material can be heated from adhesive side till appearance of high luster.

Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on Europages