Add my company Get multiple quotes Log in

SEIKI DEUTSCHLAND GMBH

Germany

Factory icon Manufacturer/ Producer

SEIKI DEUTSCHLAND GMBH
Contact
Information Products (6) Documents (4)
6 Products

Germany

Our patented Spear nozzles with thermal-sealing via the separate tip-heater open up new possibilities in injection molding, especially when processing glass fiber or carbon fiber reinforced resins.

Request for a quote

Germany

Seikis valve gate nozzles are available with independent heating of the nozzle tip and the shaft. The can be controlled individually and, therefore, synchronized with the injection for less wear and tear and a clean closure of the nozzle.

Request for a quote

Germany

Our hot-halves complete systems mean all-round service for you, we are at your side from construction to the final sampling at your factory and keep you up to date with simulations.

Request for a quote

Germany

All of our controllers are characterized by user-friendly operation (in various languages) and maximum precision. They are shielded from interfering signals and work with little noise. Our controllers are work with Seiki hotrunners or hotrunners from other manufacturers. We have experience in using our controllers with the most of the injection molding machines commonly used in Europe.

Request for a quote

Germany

No sprue losses with the perfect cold runner system. Material costs, expenses due to scrap and additional working hours in post-processing can be reduced considerably by using our RUDIZ system.

Request for a quote

Germany

We have minimized the weight of our manifolds without restricting ist vital functions and thus enable high energy savings for our customers. In addition, our manifolds are known for an uniform temperature distribution and no dead spots in the flow channels preventing the resin from deterioration.

Request for a quote

Domain icon Manufacturer/ Producer

SEIKI DEUTSCHLAND GMBH

Zuckerstr. 39-41

64807 Dieburg - Germany

Contact
Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages
Add my business

europages also recommends

A selection of companies related to the activity:

PROGRESS SILICONES

France

Factory icon Manufacturer/ Producer

Verified by europages badge

PROGRESS SILICONES has been specialised in the manufacture of silicone parts and other elastomers for industry and the medical sector since 1985. PROGRESS SILICONES designs, manufactures and sells silicone parts for the most demanding industries. Sectors, such as: the food industry, nuclear power, cosmetics, aeronautics, pharmaceuticals and biomedical. From single parts to mass production, we create all types of moulded parts, overmoulding, extrusion, co-extrusion, manufacturing and cutting. All our production can be associated with specific marking and packing operations, according to your specifications. We are equipped with 2 Clean Rooms covering 550 m2 classed ISO 7 and ISO 8, adapted to the manufacture of medical and pharmaceutical products. Our quality management system is ISO 9001 and ISO 13485 certified.

ZIMMER GMBH KUNSTSTOFFTECHNIK

Germany

Factory icon Manufacturer/ Producer

Verified by europages badge

Development, prototypes, mould construction, series production, tool transfer. We take care of you at every stage of your project. The all-round, carefree package. In the age of digital transformation, we at THE KNOW-HOW FACTORY accompany our customers worldwide on the road to technological excellence. We see ourselves not only as a technological leader and one-stop manufacturer of hardware and software, but also as a competent research and development partner. The Zimmer Group stands for family business, passion, innovation, stability, know-how and vision to ensure our customers’ growth as a future full-range provider.

STIELER KUNSTSTOFF SERVICE GMBH

Germany

Office Building Outline icon Service Provider

Verified by europages badge

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

WETEC GMBH

Germany

Factory icon Manufacturer/ Producer

Verified by europages badge

Founded in 1999, we are specialists in die and mould manufacturing and produce prototypes, small series and large series of plastic products for a wide range of applications. We design and manufacture the tools required for use at our site (as a system supplier in series production) or for use at the customer's premises. Moreover, we are happy to produce customised tools. Thanks to our cross-industry production facilities, we are partners for customers from the automotive, electronics, tool manufacturing, mechanical engineering and plant engineering sectors, as well as for measuring technology companies and many others besides. We develop tailor-made solutions designed to be sustainable and future-proof – whether we are manufacturing individual components, supplying ready-made products or acting as a full service partner. Our profile: - Injection-moulding machines with a clamping force of 25–320 t - Manufacturing of injection-moulded parts of 1–1200 g in weight - Injection moulding of insert parts - Manufacturing with the gas injection method. We process all thermoplastic materials and elastomers. Our specialities: PA6T/6I GF 50 FWA with drinking water approval. Conductivity. Materials with anti-slip or flame-retardant properties. In order to manufacture tailor-made and high-quality plastic products, you need to have the right hardware. We have fully equipped die and mould manufacturing facilities where we produce high-quality injection moulding tools. We also use Cimatron E CAD/CAM software to assist us with designing and adapting items for the injection-moulding process

A selection of products that might interest you

    Germany

    Verified by Europages

    Precision in toolmaking is crucial for the quality of your products. Our experienced mold-making team manufactures your tools professionally and functionally. Your project is in the best hands at SCHOCK. Our experienced engineers plan all resources with the most modern methods and guarantee on-time production. Furthermore, we provide full lifecycle support for your tools. In mold and toolmaking, we utilize high-quality milling machines, wire and sinker EDM machines, as well as modern CNC-controlled grinding machines. Our service offerings in the field of injection mold tooling include, among others: Injection molds Multi-component molds (rotary tables, index plates, core-back, transfer technology) Insert technology Gas internal pressure (GID) Foil overmolding (IMD) Thermoset molds Prototype and small-series molds Injection molds: up to 1,000 x 800 mm and 2.5 tons Multi-component molds: rotary tables, index plates, core-back, transfer technology

    Request for a quote

    China

    Verified by Europages

    Material: POM, PP, PA, PE, ABS Process: Injection molding Precision machining Extrusion Application: Agricultural machinery General machinery

    Request for a quote

    Turkey

    Verified by Europages

    Micron Brand Inc. Heavy Duty #15 Plastic grommets offer a 17/8″ hole size after setting and are made from durable plastic material. Micron Brand Plastic Grommets comes with various color options. Our Grommets are suitable for various fabrics up to a thickness of 4 mm by adjustable distance between the grommets halves.

    Request for a quote

    Turkey

    Verified by Europages

    Micron Brand Inc. Heavy Duty #15 Plastic grommets offer a 17/8″ hole size after setting and are made from durable plastic material. Micron Brand Plastic Grommets comes with various color options. Our Grommets are suitable for various fabrics up to a thickness of 4 mm by adjustable distance between the grommets halves.

    Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free