Denmark
Manufacturer/ Producer
Denmark
As well as cost comparable to stretch wrap The Power Flex machine is primarily used for wrapping of different load heights but only one pallet size or pallets with very similar dimensions. If the size difference between the smallest and the largest pallet is too big, the Multi Flex machine should be considered. Like the Multi FleX1, the Power Flex T1 is fitted with our patented technology of lowering the top of the machine down to floor level for easy service and maintenance (EP 2 069 206 B1). The capacity of the Power Flex T1 is 120+ loads an hour.
Denmark
The strong wrapping solution The Power Flex TL machine is primarily used for wrapping of different load heights but only few pallet sizes. If the size difference between the smallest and the largest pallet is too big, the Multi Flex machine should be considered. Like all other Lachenmeier Stretch Hood machines, the Power Flex TL is fitted with our patented technology of lowering the top of the machine down to floor level for easy service and maintenance (EP 2 069 206 B1). The capacity of the Power Flex TL is 200+ loads an hour. Film turning device for long side leading products No matter whether pallets are conveyed into the machine short side or long side leading, the film is automatically turned in the machine to fit the pallet direction in question. Especially in the bricks and building industry transporting the products long side leading is very often used.
Denmark
The stretch hood alternative to stretch wrap. The Multi FleX1 is capable of wrapping at a very high speed of up to 250+ loads per hour. The Multi FleX1 offers great flexibility with the possibility to run various load sizes with only one film size. At the same time the machine can be fitted with several film rolls to provide the ability to wrap multiple loads sizes with greater variations in size on the fly. The flexibility lies in the gripper system, where each of the four grippers can be adjusted individually both lengthways and widthways and thus adapt to the actual load size. The Multi FleX1 runs with our patented system, where the top of the machine can be lowered to floor level to ease service and maintenance (EP 2 069 206 B1).
Denmark
Tall and large loads wrapped with the Multi FleXL stretch hood machine. Our Multi FleXL machine is designed to wrap loads from 500 x 500 mm and up to 3200 length x 1700 width mm, with a maximum height of 3000 mm. The machine is specially designed to wrap large loads like insulation batches, gypsum boards and corrugated boxes. Capacity wise the machine can wrap up to 150 loads an hour depending on product height and size. The machine is fitted with the same well-known technical feature as the Power Flex T1 and the Multi FleX1, such as our patented film unwinding during stretch patent (EP 1 184 281), which eliminates thin and fragile film on the corners of the stretch hood wrapped load. The system makes film on the corners of the load approx. 30% thicker than normal and avoids the formation of "pouches" on the corners. At the same time, this system saves up to 10% in film consumption.
Denmark
The shrink wrap machine type Combi Flex, where hood application and shrinking take place in one space-saving unit, was introduced to the world market by Lachenmeier back in 1982. The film hood is fed from the top of the machine, blown up like a balloon and in this way stretched to the largest possible extent, after which it is applied over load. After application, the film hood is shrunk by mains of heat and is effectively secured for transport. Essential when shrink wrapping loads is the bottom shrinking, where load and pallet are kept tightly together as one unit. One of the most significant advantages of the Lachenmeier shrink wrapping machine is that all four burners have separate automatic speed controlled motors, ignition systems, supervision systems, etc. In case of variations in product dimensions, the heat distribution can be adjusted automatically to each single product.
Manufacturer/ Producer
Fynsgade 6-10
6400 Sønderborg - Denmark
Turkey
Moving through the centre, the product is transported to a horizontally positioned blade rotor. During rotation, the product is pushed against the wall of the machine and the eggs, if any, are destroyed inside the machine.
Request for a quoteTurkey
Chanhing roll full automaticlly Total quantity and total meter reporting Stop auto. when paper core is finished Stop auto. when stretch film is finished OMRON PLC Control System OMRON 7" Touch Pané OMRON MAIN DRIVER MINDMAN PNUEMATIC SYSTEM
Request for a quoteTurkey
Silicon oil, silicon free ester and mineral oil based different sort of defoamers and antifoam used for wastewater treatment, automotive, textile, paint&coating, biogas production, paper and corrugated board, sugar processing, fermantation, oilfield
Request for a quoteTurkey
All in one additive for dot 3, dot 4 and dot 5.1 hydraulic brake fluids composed of specialty corrosion inhibitors and antioxidants in glycol ethers-glycols mixture Dissolves clearly in glycol ethers, glycols and water. 2% (w/w) BESOL BFCI supplies 0,2% antioxidant for the brake fluid Complies with FMVSS No 116 corrosion weight change limits and prevents from copper dissolution during lifetime of the brake fluid High ERBP and WERBP values of BESOL BFCI complies with brake fluid boiling point standards.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.