The STRATE AWALIFT 74/1 is used primarily for draining floors, multi-family buildings and properties above the backflow level in accordance with DIN 1986-100, e.g. for properties that cannot be drained via a natural slope. DIN EN12056-4 establishes the upper edge of the street at the connection point to the public sewer system as the backflow level. Two-family homes Facilities that cannot be drained using natural gradient As protection from backwater damage Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4
Germany
The AWALIFT 0/1 requires a space of just 1200 mm x 1200 mm or d=1500 mm. Thanks to its unique design, it can be installed in even non-standard installation areas. A variety of available motor power levels make it suitable for use in a wide range of applications. Multi-family homes Facilities that cannot be drained using natural gradient As protection from backwater damage Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4
Request for a quoteGermany
The STRATE AWAaerob 110 - 1700 ventilation system consists of an oil-free compressor with noise suppressor, a switching system with operating hours counter and a timer, as well as a complete connection fittings set with manometer, check valve and connection line. The ventilation quantity and duration are adjusted by the timer based on the compressor run time. Fine pearls of oxygen are injected from the air. Ideal for short pressure pipes and high flow speeds in the pressure pipe Area of application for pressure pipes <= DN 200 Use with or without accompanying pipe (depending on the high and low points in the pressure pipe)
Request for a quoteGermany
AVUSE-1 for degassing under pressure, AVUSE-3 for degassing, high flow rate air inlet and outlet. Simple but studied design – To reach the best performances with optimized components. Ventilation area protected – From splashes and clogging thanks to a specific deflector design, ensuring a long term operation. Polymeric high-quality material. Easy maintenance – Thanks to quick removal of the clamps and drainage cock.
Request for a quoteGermany
The BEV-G is a single-stage valve offering only the function of the first ventilation stage (coarse ventilation) provided by the two-stage valve (BEV-GF). It is not necessary to coordinate the valve to the working pressure in the first ventilation stage, since coarse ventilation is always closed under pressure. Type G (coarse ventilation): The air escapes through this valve until the medium closes it as it continues to flow. The valve remains closed under operating pressure. Ventilation of individual sections in sloped pressure lines, especially as a low pressure safety feature Quick ventilation of high points if fine ventilation is not required (short pump run times)
Request for a quote