Villina-GNVCP-2T type vertical electric semi-submersible pumping units are designed for transit in stationary conditions of neutral, corrosive, toxic, as well as explosive and fire hazardous liquids, the vapors of which can form explosive mixtures with air. These are used in gas, petrochemical, petroleum refining and other industries. The vertical semi-submersible pump – the pump part is fully or partially in the pumped liquid. The unit consists of a pump part, drive sections, a base plate, a device that transmits torque from the drive, an electric motor (drive). The ground part comprises a console fastened to the base plate, an electric motor mounted and fastened to the console, and a mechanical seal support system fastened to a base plate. The semi-submersible part comprises drive sections fastened to the base plate, an elastic coupling body connected to the lower drive section, a pump connected to the elastic coupling body and a discharge line.
Italy
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz and 60Hz versions.
Request for a quoteGermany
Plastic immersion pumps series KTF and KTB are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is required, due to the construction. Impellers: semi-open Fluids: industrial water; warm, cold, with and without chemical admixtures, distilled, deionized Volumetric delivery: up to 400 l/min Delivery head: up to 42 m Please contact us for delivery quantity
Request for a quoteGermany
With the powerful 750 W submerged pump TWP 7506 E, even large quantities of water can be transported in a very short time. The powerful high-performance pump with near-ground suction is recommended for universal use in the house, garden and business to pump out or recirculate slightly contaminated clear water (dirt particles sized max. 5 mm) in indoor and outdoor pools, whirlpools, garden wells, rain barrels, cisterns and rainwater retention basins. Moreover, the submerged clear water pressure pump can be used to dry out basements and living spaces flooded by washing machine leaks, heavy rainfall or the ingress of groundwater, leaving "wipe-dry" results and a low residual water level of 5 mm. When used in waterproofing of buildings, the TWP 7506 E pump, which is protected against the ingress of water by IPX8 type of protection, impresses as a low-maintenance and durable drainage pump for pumping accumulated rainwater or groundwater out of the drainage shaft in a controlled way.
Request for a quoteGermany
Chemical pumps of the CHEM series are used as a modified version as submersible pumps for emptying drums and containers. For example, chemicals such as liquid sulphur are pumped at temperatures up to 150 °C. The series is well suited to transfer low-viscosity media at relatively high pressures. — For viscosities up to 1.000.000 mPas — Temperatures up to 500 °C as special version — Differential pressures up to 120 bar — Suction pressures from vacuum to 15 bar Submersible suspension pumps are designed in such a way that the pumps are submerged in the container with the medium and the medium is sucked in via the flangeless suction side. The medium then enters the process from the tank via a pipe from the discharge side. Submersible suspension pumps are often made of special or stainless steels. A special feature of these pumps, as a rule no additional seals are required on the pump. Only the tank is sealed towards the atmosphere.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.