Series 4L
Pressure Transducers
Description
The pressure transducers of the 4L series are piezoresistive pressure sensors, isolated encapsulated in oil-filled metal housings. The flush separating membrane is laser welded without gaps. Each pressure transducer is measured via pressure and temperature and delivered with a detailed calibration sheet.
- Measurement and regulation equipment and instruments - pressure
- Series 9FL
- pressure transducers
- oil-filled metal housings
Product characteristics
- Pressure Ranges
- 0…10 to 0…200 bar
- Accuracy
- ±0,5 %FS
- Long Term Stability
- ±0,5 %FS
- Dimensions
- ⌀ 11 mm x 4,2 mm
- Temperature Range
- -10…80 °C
Documents
Similar products from KELLER PRESSURE
KELLER PRESSURE
Switzerland
The pressure transducers of the 9FL series have a compact, robust housing made of stainless steel, giving them outstanding long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. The additional flange on the housing means that it can be welded to another housing, or an axial seal can be used. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.
KELLER PRESSURE
Switzerland
The series 6 pressure transducers are based on selected pressure transducers that are equipped with a pressure connection.
KELLER PRESSURE
Switzerland
The pressure transducers of the PD-10L series have been developed to measure differential pressure. These OEM pressure transducers have a single silicon diaphragm in their interior, which is pressurised from both sides and measures the pressure difference directly. This design enables them to measure tiny pressure differences even at an extremely high line pressure.
KELLER PRESSURE
Switzerland
The high-pressure transducers of the 7LHP series have a robust housing made of stainless steel, giving them optimum long-term stability for a range of OEM applications. The metal diaphragm is welded on front-flush and gap-free, separating off the piezoresistive pressure sensor, which is made of silicon, from the measuring medium. Every pressure transducer is measured over the entire pressure and temperature profile and is supplied with a detailed calibration sheet.