Solar Tracker FEiNA SF45s

Once the date, hour, and location co-ordinates are entered into the screen, use the buttons to point the Solar Tracker FEiNA SF09 to the Sun. From this moment the Solar Tracker FEiNA SF09 will start working. Every X minutes (between 1 and 90, according to what has been programmed), it calculates the position and moves the tracker if necessary. When the Sun sets meaning that the inclination of the sun over the horizon is negative, the tracker will turn to the East and place itself near the horizon (approximately 80 degrees with regard to the vertical). When the Sun rises, the Solar Tracker FEiNA SF09 returns to its almost vertical position. From this moment on, it carries out the normal daily movement. All the trackers from a plant can be connected from a central control. It can be fasten on the ground or on a roof by screws. You can fix any kind of pannel, even fotovoltaic or thermical, any you only need a spanner to do it. Dimensions: 3x3m (9 m2).

Mobile tube that rotates around the mast (Galvanized and zinc plated) Cogwheel Module 6, Diameter 720 mm, clockwise movement (aluminium smelting). Cogwheel Module 6, Diameter 720 mm, inclination movement (aluminium smelting, tempered). Axle, diameter 100 mm, L=1500 mm, inclination of the structure. (Galvanised and zinc plated). Two motors with its gears, worm screw, revolution counter switch and protection box. (Galvanized and zinc plated). Two crossed bars of 5 meters to support the transversal bars (Galvanized) – Electronic box with the motor and micro switcher connections. It is designed to support winds of 140 km/h with 20m2 of panel surfaces. Solar Tracker FEiNA SF20 Functions Once the date, hour, and location co-ordinates are entered into the screen, use the buttons to point the Solar Tracker FEiNA SF20 to the Sun. From this moment the Solar Tracker FEiNA SF20 will start working. Every X minutes (between 1 and 90, according to what has been programmed)

Fixed part placed in a column from iron or concrete (Galvanised) Moving tube that rotates around the mast (Galvanised) Cogwheel Module 6, Diameter 1008 mm, clockwise movement . Cogwheel Module 6, Diameter 1008 mm, inclination movement . Axle, diameter 165 mm, L=2800 mm, inclination of the structure. (Galvanised). Two motors with its gears, worm screw, revolution counter switch and protection box. (Galvanised and zinc plated). Two crossed bars of 5 meters to support the transversal bars (Galvanised) Electronic box with the connections for the motor and the micro contact breaker. It is designed to support winds of 140 km/h with 28m2 of panel surfaces. Functions Once the date, hour, and location co-ordinates are entered into the screen, use the buttons to point the Solar Tracker FEiNA SF28 to the Sun. From this moment the tracker will start working.

The solar Tracker FEiNA SF70-1EH is an horizontal single axis that can be customized to fit any size photovoltaic panel or solar thermal module. The solar Tracker FEiNA SF70-1EH has a maximum sail area of up to 70 square meters, but the tracker modular design can be installed in different lenghts to deal with obstacles and obstructions in the installation sites terrain. The solar Tracker FEiNA SF70-1EH has networking capabilities which allow for the sharing of common resources in a solar field, such a GPS unit, which provides accurate time and pin point location updates, and an Anemometer to protect the trackers in the event of extreme wind conditions. The networking capabilities also allow for remote monitoring and programming, reducing the onsite manteinance costs. The solar Tracker FEiNA SF70-1EH incorporates a fully programmable control system which includes a new “Backtracking” feature. The Backtracking feature commands the tracker to revers