TEXHYDRO® OIL JET

Charma ® HILL is a new generation silicone oil that can be self-emulsifying. Charma ® HILL does not need surfactant for emulsion and also does not require additive. Unlike amino silicones, Charma ® HILL does not cause yellowing and although the usage amount is low in application, it shows high performance according to amino silicone three or four times on synthetic, cotton blends and polyester. Charma ® HILL gives color depth to dark colored. It is self-emulsified and can be diluted with water Do not cause yellowing Affect the color of dark fabrics, gives depth of color It does not cause thermal migration in polyester. It can be re-dyed and re-processed It protects fastness at 190°C fixed temperature. Good shear stability (25000rpm) Can be used in jet machines. It has electrolyte stability Effective for low usage amount. Give washing resistance

Texamin® EM 45 can be used for all natural and synthetic fiber mixtures, gives a great slipperiness effect to the fabric. Silky smoothness Excellent silky touch Brighter and gloss to the fabric High washing fastness Easily preparation Low yellowing Easy to emulsify High Ph Temperature stability Optical and resin strength Effective in low dosage Preparation of the end use product in order to prepare 100kg product, 30 – 70Kg Texamin® EM 45 taken into tank and mixed at 40 circulations, 15 minutes. A sample is taken and the properties are tested.

Maxant® CLEAR is a highly potent silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Maxant® CLEAR is stable under extreme conditions such high temperature and competitively low concentrations. The low surface tension of the Maxant® CLEAR droplets enables the silicone to persistently flow into adjacent foam films and continue to break them down, minimizing the reapplication of the antifoam, potentially saving processing time. Permanent foam cut off Rapid foam knock-down Foam inhibition in extreme temperatures Long term foam inhibition Compatibility with wetting agents Ease in forming dispersions in all foaming systems Ease in forming dispersions in hard water Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Excellent foam control Stays clear in different wetting formulations Maxant® CLEAR is mainly designed for preventing foam in process applications.

HyperTEX® Repellix is 2 component silicone elastomer which is addition curing system. It is suitable for direct printing by adding HyperTEX® Active Catalyst into the silicone. No solvent Good adhesion on fabric No color changes after curing Excellent washing durability Suitable viscosity for printing Excellent silky touch effect High and low heat resistance Good elongation Excellent cracking resistance HyperTEX® Repellix silicone is mixed with HyperTEX® Active Catalyst at recommended mixing ratio. (100:1-100:3) After catalyst is added in silicone, curing starts. Curing time can be accelerated with high temperatures. . The amount of catalyst can be changed depending on the applied temperature. HyperTEX® Active Retarder can be used to extend screen open time in extreme climates. Pallets should be preheated to 60°C before printing to produce best results. Recommended curing temperature is below 140°C.