THA – Thermocouple Connector Conditionner
Displays and transmitters
- Connectors, electronic
- Thermocouple Connector Conditionner
- Displays and transmitters
- Connector
Product characteristics
- Range
- From -20 – +120 °C To 0 – +1250 °C
- Type
- K, J, T, …
- Cold junction error
- 1 °C
- Accuracy (Range < 1000 °C)
- 0.5 %FS
- Accuracy (Range > 1000 °C)
- 1 %FS
- Drift vs. Ambient Temperature
- 0.5 °C
- Sensitivity Linear See calibration table
- mV/°C
- Supply Voltage
- 5 to 16 V
- Supply Current
- 2 mA
- Output Voltage
- 0–5 V
- Output Impedance
- 47 Ω
- Calibrator
- Fluke 714
- Dimension
- 32,5 x 19 x 10 mm
- Material
- Aluminium
- Weight
- 15 g
- Protection
- IP53
- Vibration test
- 20Gpp5’
- Shock
- 500 G
- Operating Temp
- 0 to +100 °C
- Storage Temp
- -40 to + 125 °C
Similar products from THERMA THERMOFÜHLER GMBH
THERMA THERMOFÜHLER GMBH
Germany
Compatible with any thermocouple probe type K fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.
THERMA THERMOFÜHLER GMBH
Germany
Precision: (at nominal temperature = 25 °C) NiCr-Ni: ±1% ±1 digit (from -20 to +550 °C or 920 to 1,150 °C) NiCr-Ni: ±1.5% ±1 digit (from 550 to 920 °C) Pt100, Pt1000: ±0.5 °C ±1 digit or ±1 °C ±1 digit Offset adjustment: (only with Pt100 and Pt1000) The sensor”s zero offset (e.g., caused by a long cable) can be adjusted with the aid of the offset trimmer on the rear of the device.
THERMA THERMOFÜHLER GMBH
Germany
Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Jab-in cover allow easy connection without need cover removal. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.