Germany
Manufacturer/ Producer
Germany
Oxygen combination sensor with built-in type S thermocouple and threaded connection. Applications (examples): The sensor is used, for example, in carburizing plants to control the C-level, in forging furnaces to control the air supply of the gas burners, or in the atmosphere of crematoria. The sensor is not heated. Therefore, a minimum operating temperature of 500 ° C is required. Material Order: Assembly: Connection head form A with M20x1.5 cable gland Pressure range: Ambient pressure up to 2 bar Temperature range: 520 ° C to 1300 ° C Connection: thread G3 / 4 "DIN 228 / thread G1" DIN 228 Thermocouple: 1 x Type S PtRh (10%) - Pt DIN EN 60584-1, Class 1 Protection tube: Ø 17mm Thermowell material: 99.7% Al2O3 Continuous zirconia tube as electrolyte Reference air connection: Ø 6,0 nozzle max 10 liters / hour Purge air connection: Ø 6,0 nozzle max 200 liters / hour Gas electrode: spiral / helix platinum wire Air electrode: spiral platinum wire
Request for a quoteGermany
Oxygen combination sensor with built-in Type S thermocouple and holding tube connection. The standard dimensions are connectors with 22 x 150mm or 27 x 150mm in stock. The sensor is not heated. Minimum operating temperature is 500°C Configuration: Connection head form A with M20x1,5 cable gland Pressure range: Ambient to max 2 bar pressure Fitting: Thread G3/4" DIN 228 Thermocouple: 1 x Type 01 - S PtRh(10%) - Pt DIN EN 60584-1, Class 1 Protection tube: Ø 17mm Protection tube material: 99,7% Al2O3 SAT tube: 1 Nominal length: 27.559 in ( 700 mm ) Weight: 2.425 lbs ( 1.1000 kg ) ECCN: N AL: N Commodity code: 90258080 Including : - Certificate of calibration in accordance to DIN EN 60584-1 with correction values from 150°C to 1320°C in 140°C steps. - Certificate of conformity including production data and Helium leak test results. - 4 years warranty against drift and thermocouple wire defects provided the ceramic tubes are not damaged.
Request for a quoteManufacturer/ Producer
Grünspechtweg 19
13469 Berlin - Germany
Germany
These are the E-cigarette shell which is machining by aluminum,then after special knurled,brown plating ,its nice appearance makes it very popular.
Request for a quoteGermany
These are the parts made by brass, then after colorful plating, the products mainly used in electronic product field.
Request for a quoteChina
Material: Amorphous, Semi-crystalline and Mineral Filled Semi-crystalline. PEEK (polyetheretherketone) Film Provides: ● High Temperature Performance ● Excellent Tribological Properties ● Broad Chemical Resistance ● High-Strength & Toughness ● Electrical Stability & Radiation Resistance ● Low Smoke & Toxic Gas Emission ● High-Purity, extremely low extractables Appication: ● Micro speaker diaphragm, dome tweeter. ● Presslire exchanger and senior oliaphragin. ● Aerospace high-speed rail insulation and TAB heat insulation components. ● Thrust washers for micro motors, gaskets for automobiles. ● High-temperature resistant label, pressure sensitive tape substrate. ● Insulation layer of electric vehicle battery. ● Flexible film surface heater. ● Wire, cable, insulation and wrcop sheaths.
Request for a quoteGermany
Equipped with an electronic bubble, the FTS 300 offers an exceptionally powerful and cost-effective solution for a wide range of general and specialized applications in construction and engineering.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.