THERMOTEC PRODUKTIONSGESELLSCHAFT MBH

Germany

Factory icon Manufacturer/ Producer

Verified by Europages badge
THERMOTEC PRODUKTIONSGESELLSCHAFT MBH

Germany

Verified by Europages badge

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape K    An absolute classic

Germany

Verified by Europages badge

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.  Shape L    This plate heat exc

Germany

Verified by Europages badge

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat no costs involved Shape U    This structural shape is especially qualified for small plate heat exchangers. This structural shape is although qualified for plate heat exchangers which should streamed vertically.

Germany

Verified by Europages badge

•  operating temperatures up to 600°C (standard) •  completely made of stainless steel •  heat recovery factor up to 85% •  pressure-resistant up to 150 mbar •  completely welded •  high degree of efficiency •  without seelings  •  up to 100% gas-tight •  low maintenance •  small construction volume •  flexible coordination due      to single-item or small-lot production •  distance between plates from 3.5 mm to 7 mm •  available in the structural shapes K, L, U and LU  •  complete seperation of the two gas flows •  different current lines possible •  different volume flows for exhaust and feed air,       applicable for the temperature control of useful heat Structural shape In principle, the shape is arbitrary.  The choice takes place after consulting with the customer and with similar power are no costs involved. It depends on the technical demands of the application.  The structural shape X (crossflow) isn't possible with the ´ THERMO GAS System.     Shape LU  This structural s

Germany

Verified by Europages badge

• THERMO-DK are used for the reliable regulation of air, superheated    steam and flue gas flows. The maximum permitted temperature may be,     depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively     use stainless steal alloys to make our THERMO-DK valves. Our      standard working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-DK valves are controlled manually, electrically or pneumatically.       All brands can be used for the drive.  • THERMO-DK valves are metallically sealed and function without     any additional sealing materials.  • The leakage rate is less than 1 % (based on the cross-section).     THERMO-DK valves are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house     production allows us to deal with virtually any customer requests.   • Due to systematic standardisation in detail and our long-term     experience, THERMO-DK valves are not prone to malfunctions.

Germany

Verified by Europages badge

Standard turning valve      • from Ø 100 mm to Ø 1200 mm      • variable length       • designed and produced according to customer specifications, the flanges         as well

Germany

Verified by Europages badge

 Standard turning valves  combined in a T-joint  • from Ø 100 mm  to Ø 1000 mm     • designed and produced according to customer specifications                                         

Germany

Verified by Europages badge

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun

Germany

Verified by Europages badge

 • THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfu

Germany

Verified by Europages badge

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun