The main function of the rigid shaft coupling is the safe and backlash-free connection of two shafts by means of friction. For example between a drive shaft and driven shaft and mainly to transmit torque. Shaft couplings consist of a connecting sleeve and two external clamping systems. They are not separable like flange coupling. The external clamping systems generate a backlash-free connection by pressing the connecting sleeve onto the shaft ends. The external clamping system does not transmit any torque or moments between the shaft ends, they just provide the necessary clamping forces. Those external clamping systems are not part of the flow of forces, but the connecting sleeve is. The couplings have to be installed by moving them onto the shaft ends followed by tightening of the external clamping systems via bolting. To achieve proper operation and a sufficiently high coefficient of friction, the contact surfaces at the shaft extensions must be free of grease, dry and clean....
Poland
It is hard to imagine operating electronic devices without the help of chargers. Anyone who wants to shorten the battery charging process, make it more effective and at the same time energy-saving should be interested in new generation gadgets. The charger in GaN technology from Dudao is an absolute hit on the market, which has a real chance to revolutionize it. Why? Because it uses the power of gallium nitride instead of silicon. GaN is a semiconductor material that not only improves the efficiency of the charging process, but also requires much less energy and takes up minimal space. Therefore, it is ideal for mobile use, also at work or traveling around the world. It is compatible with sockets around the world where electrical voltage standards range from 100 to 240 volts.
Request for a quoteGermany
zinc diecasting*and brass,*nickel plated*vinyl coated jaws*length 300 mm
Request for a quoteItaly
SCIROCCO W is the new tabletype dry cooler for refrigeration, conditioning and industrial process applications.
Request for a quoteFrance
Particularly compact selfcentring keyless locking coupling without axial offset. for shaft diameters from 8 to 85 mm for medium torques suitable for hubs with low wall thickness no axial offset selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.