Ultrasonic sealer for sealing trays ME 405 US

The PANDYNO FPPD vertical inserters allow to an operator to fill and seal the packs avoiding the use of preformed bags. The operator must in fact insert the product to be packaged in the magazine tube, on which a few meters of tubular film have been previously loaded. The product goes down into the tubular film up to the support surface. The operator manually closes the sealing bar by applying a slight pressure on the bar. The welding machine in a single operation carries out the welding of the package, the cutting of the film and the welding of the bottom of the next envelope. This operation takes place using an electromagnetic blocking device. By equipping the bagging machine with several loaders, it is possible to increase the productivity of the machine. To avoid waiting times it is also possible to pre-load different magazine tubes so that they can be quickly replaced once the film is finished. The standard model can be placed on a bench and comes with a charger of your choice.

SEALING MACHINE/BAGGING MACHINE MOD. SUPER - FOR MASSIVE PRODUCTS Machine consists of a loading tube on which a tubular film with a width of 50 cm is fitted. and a manually operated sealing bar. The loading tube is slightly inclined and facilitates the sliding of the product inside the film, without causing sudden falls. By lowering the sealing bar a perfectly sealed bag is obtained and at the same time the bottom of the next bag is created, a hot cutting system separates the two packages. The SUPER bagging machine can be positioned at the entrance barriers of hypermarkets, supermarkets, shopping centers, to reduce theft, small objects but it is also widely used for packaging technical items, clothing, linen, etc.

L-SEALERS BSF SERIES The manuals bench L-sealers BSF series are very simple and practical. Allow to obtain the envelopes perfectly sealed, using standard fold film. They are suitable for use in laundries and textile sector in general and in the paper industry, but are also helpful in the food industry for the packaging of the bread. Sealing bar with manual operation. The choice of the machine must take into account that: the dimensions of the box (height + depth) must not exceed the maximum width of the reel mounted on the machine (depending on the model) also considering that there must always be at least 50 mm of waste. To confirm that the machine is suitable, we always advise you to contact us and report the measurements of the boxes to be packaged.

MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal