WALTER STAUFFENBERG GMBH & CO. KG

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 1), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 102 mm / .24 inch to 4.02 inch. Clamp bodies manufactured from various thermoplastics, thermoplastic elastomers or aluminium – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 2), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 450 mm / .24 inch to 17.71 inch. Clamp bodies manufactured from various thermoplastics, thermoplastic elastomers or aluminium – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 42 mm / .24 inch to 1.65 inch. Clamp bodies manufactured from various thermoplastics. Excellent UV, weathering and chemical resistance – even under extreme conditions. Tested and approved by several independent certification organisations.

Most economical solution available for quick, easy and secure pipe, tube, hose and cable installation Original STAUFF Block Clamps in addition to clamps in the Heavy Series and the Twin Series according to German Industry Standard DIN 3015 (Parts 2 and 3), designed as a construction kit for the installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial outside diameters from 6 mm to 42 mm / .24 inch to 1.65 inch. Clamp bodies manufactured from various thermoplastics – also with shock-absorbing and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance – even under extreme conditions.

▪ Material and design in compliance with section 7.3 (Tubing Installation) of the Norwegian offshore standard Norsok Z-010 (Revision 3, published in October 2000 ), API RP 552 and NACE SP 0108-2008 (section 13) Clamp body made of flame-retardant PP-V0 plastic material (tested and V0 classified according to UL 94) Integrated anti-corrosion elastomer strips avoid the accumulation of seawater between clamp body and pipe Drainage channels aid the dispersal of seawater (self-draining) ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced corrosion resistance by practically excluding metallic and non-metallic impurities during production, processing and handling ▪ Suitable for continuous exposure to temperatures from -25 °C to +80 °C (from -13 °F to +176 °F) ▪ High UV stability of the clamp body material; resistant against seawater, rain and oil ▪ To be used in sub-sea and top-side environments; alleviating the requirement for two different...

STAUFF NRC type clamps were designed for the noise and vibration reducing installation of pipes and tubes with the most common outside diameters between 6 and 42 mm and ¼ to 1 ½ inch respectively. The working principle is based on clamp bodies made from Polypropylene (colour: black) following the Standard Series according to DIN 3015 (part 1) with a specially shaped, two-part elastomer insert, which mechanically absorbs vibrations in the pipe and as a result reduces noises arising to a minimum. The insert is in particular distinguished by how little of its surface is in contact with the pipe and clamp body, and as a result is far more effective than the previously known solutions. The tongue-groove contour of the insert and body, which is reversed and thus diverges from DIN 3015, enables the system to be used for the widest possible range of pipe diameters per clamp size, which contributes to flexibility and versatility. STAUFF NRC Clamps are completely compatible with the...

In many areas, stud welding is considered to be the most economic fastening method for components and is sometimes even the only technically feasible solution. Because the stud is joined with the substructure over the entire surface of the stud without any hollow areas, a high strength can be achieved. STAUFF is now using this proven principle for the installation of pipe, tube, hose and cable clamps in the Standard and Twin Series (according to DIN 3015, parts 1 and 3) with M6 mounting thread, where female threaded weld studs replace the regular weld plates; distance plates made from plastic provide the necessary spacing between the clamp bodies and the substructure. If required, the system can also be adopted for alternative fastening methods, e.g. for clamping belts, cable ties or corrugated cable protection hoses. In addition to the individual components – weld studs, distance plates, clamp bodies and metal hardware required – the company also provides the correspondingly...

The benefits of using aluminium in machine and plant construction are abundant: although aluminium is considered to be a light metal with a density of 2.6 to 2.8 g per cm³, which offers potential weight savings of up to 66% compared to steel and stainless steel, it still has exceptional strength considering these properties. However, the design and concept of steel constructions can often not be transferred one-to-one, due to the higher malleability and lower residual stress of aluminium components. An additional benefit is the aluminium's inherent resistance to corrosion: When exposed to oxygen, the light metal forms an oxide coating, which is immediately regenerated upon permeation. Standard processing methods, such as MIG, TIG and CMT welding can easily be used on aluminium without hesitation – particularly on substrates that are also made of aluminium. In some instances, they can be carried out more easily, more quickly and using simpler equipment, which results in further...

The innovative STAUFF Bond system allows for pipes, tubes, hoses, cables and other components with outside diameters up to 102 mm / 4.00 in to be adhesively bonded to almost any surface material, such as prepared or unprepared metals, thermoplastics and composites. It enables assembly and service technicians such as tube fitters to replace expensive and sometimes complicated mechanical fastening methods for STAUFF Clamps such as welding, brazing, bolting and riveting - a crucial benefit especially in safety-critical situations where welding is usually not considered to be an option. Main Benefits of STAUFF Bond

Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on STAUFF developments, made of Polypropylene, Polyamide and other thermoplastics. Accessories such as weld plates, cover plates, bolts as well as rubber inserts are available on request.