Results for

Technical-grade plastic parts - Import export

49 Companies

2 Products

PERIFERI SAS

France

Since 1985 PERIFERI has been specialised in the design and manufacture of finishing machines for blown and injected plastic parts. We namely provide conventional and clean (hot gas, laser infra-red) welding machines, as well as cutting, stamping and assembly. We have two design offices: one in automation focussed on programming automatons and robots, the other in mechanics with the most advanced technologies in terms of computer-aided design and drawing. We also have our own workshop for assembling, wiring and perfecting machines. We mostly work with the car industry, as well as for SME's who trust our expertise. Our clients include MAHLE, MANN HUMMEL and PLASTIC OMNIUM. We design both manual single-user machines and fully robotic lines at press output.

Website
SAXONIA-FRANKE GMBH & CO. KG

Germany

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Website
WILHELM-PLASTIC GMBH & CO KG

Germany

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Website See all products
BUCK SPRITZGUSSTEILE FORMENBAU GMBH

Germany

Buck Spritzgussteile Formenbau GmbH was founded in 1985. Our core competence today is the high-quality production and global sale of top quality injection-moulded parts for the supplier market to the automotive industry. Continuous growth, specialist qualification and transparent communication – the three cornerstones on which the success of our medium-sized family-owned enterprise is built. Our declared aim is to satisfy our customers; our top priority is the development of a comprehensive solution: Individual consultation, short decision-making processes and flat hierarchies facilitate our reliable implementation of projects. Range of services: Fully and partly automated production, compact injection moulding, multi-component injection moulding (2K), MuCell technology, injection moulding of insert parts, robot-controlled removal, camera monitoring, internal pressure monitoring, assembly and painting. All machines feature MDC (machine data collection). Our machinery includes: From 15 t to 400 t.

Website
KUNESA GMBH

Germany

Every project has its own requirements, every customer behind it has unique expectations, every approach therefore calls for individual measures and every step of the process must be focussed on the goal. Our wide range of production options for metal, plastic and wood processing, our own in-house surface technology and paint shop for working with all varnish types as well as the technical innovations in planning, ranging from virtual reality to prototyping allows us to develop and produce individual and system solutions in a targeted way, using a wide variety of materials. For more than 100 years, we have been offering you, in addition to our expertise as a full-service interior outfitter and product developer, the whole range of services for an all-round successful result - individual and customised, all delivered from a single source and in-house. We know how best to respond to your requests, to harmonise them with optimised workflows and to carry them out professionally.

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

AGOFORM GMBH AUGUST OTTENSMEYER

Germany

With the highest level of plastics expertise, 90 years of experience and continuous further development, AGOFORM has established itself as a high-performance partner to the furniture industry on the international market. With the objective of offering customers the optimum solution for different, personalised usage purposes, AGOFORM develops perfect products for designing more comfortable living spaces – from countless deployment systems for diverse applications right up to anti-slip mats. In terms of transport technology sectors, AGOFORM offers solutions for caravans, industrial vehicles and construction and agricultural machinery. Our wide range of products and experience is rounded off by the fields of gardening and landscaping, goods carriers (small load carriers) and electrical and medical technology, as well as logistics, advertising and decorating. With the highest quality requirements at all times, always with regard to sustainability and constantly looking to the future.

Website See all products
TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Germany

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Website
HA-WI KUNSTSTOFFE GMBH & CO. KG

Germany

HA-WI Kunststoffe GmbH & Co. KG in its present form was formed in 1998 by the merging of KURI Kunststoff Verarbeitungs GmbH, founded in Bonn in 1959, and HA-WI Kunststoffe GmbH, located in Bad Laasphe since 1972. The two companies were merged at the Bad Laasphe site and both product ranges at that time were combined and expanded in line with market requirements. At the same time, the areas of technical items and quick-clamping systems have been continuously expanded and a quality management system has been implemented alongside state-of-the-art technology. The result is our current company with the three product divisions: Standard components, technical parts and BAKRA® quick-clamping systems

Website
CINCHSEAL EUROPE GMBH

Germany

For many years, we have been active as a partner of industry in the area of plastic and seal technology. We have a wide-ranging portfolio of seals, from flat gaskets to customised, innovative high-tech seals. We have customers from all branches of industry. Whether you are a manufacturer or a user, we will be happy to give you a non-binding quote. We are official partner of the German company Möller Industrietechnik Gmbh and Möller Metalldichtungen GmbH and specialized in the field of flat gaskets and metal gaskets. We are also official distributor of the Austrian company Plastoseal® Produktions GmbH and specialized in all kinds of turned gaskets and drawing parts. Cinchseal Europe GmbH - Your problem solver in sealing technology

Website See all products
WETEC GMBH

Germany

Founded in 1999, we are specialists in die and mould manufacturing and produce prototypes, small series and large series of plastic products for a wide range of applications. We design and manufacture the tools required for use at our site (as a system supplier in series production) or for use at the customer's premises. Moreover, we are happy to produce customised tools. Thanks to our cross-industry production facilities, we are partners for customers from the automotive, electronics, tool manufacturing, mechanical engineering and plant engineering sectors, as well as for measuring technology companies and many others besides. We develop tailor-made solutions designed to be sustainable and future-proof – whether we are manufacturing individual components, supplying ready-made products or acting as a full service partner. Our profile: - Injection-moulding machines with a clamping force of 25–320 t - Manufacturing of injection-moulded parts of 1–1200 g in weight - Injection moulding of insert parts - Manufacturing with the gas injection method. We process all thermoplastic materials and elastomers. Our specialities: PA6T/6I GF 50 FWA with drinking water approval. Conductivity. Materials with anti-slip or flame-retardant properties. In order to manufacture tailor-made and high-quality plastic products, you need to have the right hardware. We have fully equipped die and mould manufacturing facilities where we produce high-quality injection moulding tools. We also use Cimatron E CAD/CAM software to assist us with designing and adapting items for the injection-moulding process

Website

WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU

Germany

The Weber Group is a development supplier and system partner providing sophisticated plastic solutions for customers in the automobile, building technology and household appliance sectors. With approximately 1, 300 employees, this medium-sized family business develops and manufactures products at sites in Germany, Poland and China. In addition to its core business of plastics technology, wezi-lit sealing putties have been an additional area of operations of the Weber Group since it was founded in 1949. The company is certified DIN ISO 9001, IATF 16949, DIN ISO 50001 and DIN ISO 14001. Calling on its expertise and passion, the day-to-day mission of the Weber Group is to create fascinating ideas and exceptional solutions offering customers outstanding benefits.

All the products for "technical-grade plastic parts"

Building Technology (Plastics Technology)

Website See all products
PAUL THOORS GMBH KUNSTSTOFFVERARBEITUNG

Germany

Manufacture of suction cups in all variants. Suction cups with threads, suction cups with hooks, suction cups with clamps, suction cups with cross holes, suction cups with studs, suction hooks, double suction cups and wall hooks. Paul Thoors GmbH is a market leader in its sector and has been producing high-quality suction cups and plastic items for a wide range sectors for over 65 years. The majority our total production volume is the manufacturing and distribution of our own products. We also manufacture according to drawings or samples as contracted work and as a supplier. We produce our wide range of products on the very latest production systems, e.g. with insertion robots and automated handling systems, thereby ensuring an efficient and reliable production flow.

Website

BIO-RAD - ÉTABLISSEMENT DE GÉMENOS (ANCIENNEMENT PLASTIFRANCE)

France

For over 60 years Plastifrance has designed, manufactured and sold plastic components for aeronautics, medicine, the car industry, etc. Our values are industrial excellence, quality service and innovation for parts perfectly suited to your applications. We manufacture plastic components by injection (plastic stops, plastic caps, sleeves and covers) to protect your parts during transport, surface treatment and finish (handles, nozzles …) and wiring management (cable glands, grommets, covers, clips and rivets…).

Website
TECHNOFORM KUNSTSTOFFPROFILE GMBH

Germany

For years, Technoform has been among the world's most acclaimed suppliers in the plastic extrusion industry. The specialist company develops and produces complex extruded profiles for technical industrial applications, especially in the energy, automotive, aviation and construction sectors. Today, some metal components are already being replaced with Technoform products in these sectors. Our customers particularly value TKP's expertise in solution-oriented development with which the company faces each new task. High precision (± 0.05 mm), very smooth surfaces and perfectly sharp outlines, as well as our ability to highly precisely manufacture internally calibrated hollow profiles, expand the range of applications of our products. Our fast processes and exemplary quality of our end products set us apart from the competition.

Website
SCHAUENBURG INDUSTRIETECHNIK GMBH

Germany

Schauenburg Industrietechnik GmbH, based in Nuremberg, is part of the globally active SCHAUENBURG INTERNATIONAL group of companies. The company's services are used by the automotive industry, the construction industry, mechanical engineers and producers in the household appliance sector. As an internationally recognised development and production partner, the company produces plastic and rubber moulded parts from drawings. The portfolio is rounded off by hoses, stamped parts and profiles. One particular advantage of the company is that it produces its own plastic moulded parts. Fully automated 24/7 production guarantees maximum efficiency for small and large-scale production alike. The company specialises in ultra-small moulded parts, measuring less than 10 mm. The variety of products offered is also matched by the scope of the logistics service: Tailored solutions in C-parts management and kanban highlight the importance placed on customer orientation and performing in line with the market. Schauenburg Industrietechnik GmbH is certified to DIN EN ISO 9001 standard

Website
FRANZ FISCHLER GMBH & CO. KG

Germany

For more than 50 years, plastic moulded parts and abrasives have been at the forefront of our company. In the course of this, maximum precision and a highly innovative spirit have come to distinguish our individual solutions and leading products. Our guiding principle is to put the customer at the centre of our business. Your satisfaction alone is the basis of our success. For the long term, across all products and services, our commitment to you always applies: We will work together with you as your partner. You will receive a tailored solution specially developed for you that suits your individual requirements. You will benefit from leading products and high profitability as we continually strive to improve our quality and throughput times. To save energy and reduce consumption of raw materials, we manufacture using state-of-the-art technology while continually optimising our processes and products.

Website
MPI EUROPE GMBH

Germany

The MPI family of companies (Managed Programs and Performance Design) is a global product design, development and manufacturing company, supplying composite engine, automotive and marine components. We design and manufacture, among others, intake manifolds, valve covers and oil pans. MPI Europe also has many years of experience in e-mobility, medical technology and consumers. Our focus in Europe is components sensitive to warpage (e.g. coolant tanks, scoops) and complex assemblies (with 2K parts and kinematics, e.g. air-conditioning systems) We use our design expertise in prototypes and series production of plastic and carbon fibre components to offer high value to low- and medium-volume OEM, Tier 1, performance and motor racing customers. We offer European and American customers a convenient logistics concept with local tool sampling, part production and project management with technical communication in German or English.

Website
PLASTIC BILLAT

France

The company BILLAT, known today as PLASTIC BILLAT, was founded in 1973. For almost 50 years, it has specialised in the injection moulding of high-quality plastic technical parts for short and medium-sized product runs. We are the last remaining French company that manufactures automotive accessories under the BILLAT brand. We have a team of 36 employees and a total of 30 injection moulding machines, 10 of which are electric, operating 24 hours a day, 6 days a week. This organisation nous means that we can quickly meet our customers’ demands while ensuring top quality and premium service. All our activities are carried out on a single site, enabling us to maintain lead times with regard to maintenance and development. For further details, don't hesitate to contact us!

Website
CHAPUT SPRL

Belgium

Since 1965, CHAPUT has set out to become a benchmark setter for industrial rubber. Accordingly, our own engineering office and machining shop are at your service, which enables us to create and adapt our moulds very quickly. Our mission is to provide the right solution to your needs in the fastest time. We produce standard and bespoke elastomer parts, one-offs or long runs in the materials you specify on our vast fleet of machines.

Website
VARINA SA

Belgium

The company VARINA SA, is a Manufacturer/ Producer, which operates in the Plastics - industrial raw materials industry. It also operates in the Signs and signalling panels and boards, Rubber and plastic - processing, Plastics - industrial products, Prototypes, industrial, Industrial design, Signs and signalling panels and boards, Rubber and plastic - processing, Plastics - industrial products, and Prototypes, industrial industries. It is based in Antoing, Belgium.

KUNSTSTOFFTECHNIK SCHMID GMBH & CO. KG

Germany

Founded in the Black Forest 30 years ago and having achieved growth as a family-run business, we are your partner for high-tech solutions and services in the fields of plastic processing and automation. With modern and high-performance products, we have transformed from a small company into a medium-sized business over recent decades. Our ability to create close partnerships with our customers and show great dedication and flexibility are the foundation of our success. We view ourselves as full service partners for our customers. We are your one-stop shop from having your first idea, to developing the tool technology and technologically sophisticated mass production of injection-moulded parts made of up to three components. Our range of services is rounded off by our expertise in automation and special mechanical engineering. This means that we are able to produce parts in an cost-efficient manner and keep to even the tightest of delivery schedules.

See all products
FRIEDENSTAB KUNSTSTOFFTECHNIK GMBH

Germany

Do you have an idea? We have just the solution for you. Together with you, we work out the right overall package, and support you from development to series production of plastic components! Our core skills: Plastic products made using injection moulding and extrusion processes and all related services with committed and reliable customer service "Made in Germany". Since 1949 we have been a family business, and are now in our fourth generation. Thanks to fair treatment of our customers and suppliers, we can be proud of a number of partnerships stretching back several years, and will put the utmost effort into maintaining these in the future. We stand for commitment and quality that's "Made in Germany". Sustainability is an especially important subject for us. For this reason, 100% of the electricity we use is from renewable energy sources. Our energy requirements are met by certified hydropower and our own photovoltaic systems (180kWp)

See all products
MEDING GMBH

Germany

Meding GmbH is a specialist in plastic technology and produces customer-specific products for many sectors, particularly for medical technology. The company, based in South Westphalia, Germany, uses state-of-the-art production facilities and techniques to manufacture challenging items in one-, two- and three-component injection moulding procedures. Our injection moulding machines are equipped with state-of-the-art five-axis handling devices. Production can also be carried out in cleanroom conditions (class 7). Since investing in an injection blow moulding machine, it is now possible to produce bottles and jars for you. Quality is crucial at Meding, demonstrated by certification in accordance with EN ISO 13485: 2012 and DIN EN ISO 9001: 2008. We can offer you everything from a single source, from product development to design, 3D printing of a prototype, tool manufacturing, series production in various injection moulding procedures, through to printing and packaging, all with a high level of quality and reliability
PLASPAR PLASTIC INJECTION

Turkey

Established in 1965, Plaspar is a Plastic Injection and Mold Production factory in Bursa, Turkey. It operates on a 2000m² dedicated area to carry on activites like Mold Design & Production, Plastic Injection & Production and technological appliance solutions. Our diverse and sophisticated machinery allows us to secure accurate and high quality production range, ensuring high adaptation and reliability for customer needs. Thanks to our solid infrastructure, we can produce all kinds of plastic products like replacable auto mobile parts, small components, toys, household items, machinery parts etc. Let us know about your production needs and be sure that we will provide competetive pricing. Feel free to contact us for any details. Our communication department is active 7/24 and usually respond in 1 to 2 hours.

All the products for "technical-grade plastic parts"

Plastic Production

See all products
PLASTIUM GMBH

Germany

Können, das überzeugt. Eine Art, die inspiriert. Kunststoffgerechtes Gestalten ist Ingenieurskunst und Organisationskunst zugleich. Auf der technischen Ebene zählen Expertise, Erfahrung und der Elan des Erfinders. Im Umgang mit Menschen zählt für uns wertschätzende Kommunikation auf Augenhöhe: der Austausch mit Kunden, Mitarbeitern und Geschäftspartnern soll allen Beteiligten Inspiration auf dem gemeinsamen Weg nach vorne geben. So entstehen die besten Ideen - und Lösungen, die echten Fortschritt bringen. Seit über 50 Jahren stehen wir für Zuverlässigkeit, Kompetenz, Qualität und Innovation. Diese Kombination ist die Gewährleistung für hohe Kundenansprüche. Leistungen: Plastium bietet seinen Kunden eine sehr leistungsfähigen Wertschöpfungskette: Entwicklung und Konstruktion, Werkzeug- und Formenbau, Kunststoffspritzguss bilden eine Einheit, in der Synergien geschaffen werden, Innovation interdisziplinär stattfindet und Spezialisten ihr ganzes Potenzial abrufen können. Unsere Kunden kommen aus unterschiedlichen Branchen, haben jeweils ganz eigene Prioritäten und Vorstellungen – und bringen unterschiedliche Voraussetzungen und Aufgabenstellungen ein. Entwicklung, Werkzeugbau und Spritzguss werden je nach Anforderung einzeln, in teilweiser oder vollständiger Abfolge in Anspruch genommen. Unseren Standard-Katalog und vieles mehr finden Sie auf unserer Website: plastium.com Kontaktieren Sie uns gerne, wir freuen uns auf Sie.
GEORG HARTENBACH TECHNISCHE DREHTEILE AUS KUNSTSTOFF

Germany

We have been manufacturing plastic turned parts of all kinds for over 30 years. Our production ranges from 4–60 mm parts produced on an automatic lathe to 120 mm turned parts on conventional lathes. We manufacture quickly, reliably and with precision. Our products are used in mechanical and electrical engineering, the chemicals industry, the furniture industry, lighting technology, plant and apparatus engineering, environmental technology, water treatment, etc. We process POM, PA6, PA6.6, PA6.6 GF, PVC, PVDF, PEEK, PTFE, PE, PP plastics, amongst others. We are partners and manufacturers for small, medium and large series production. Production takes place in accordance with an original drawing, sketch or sample. Please do not hesitate to contact us if you have any questions.
NEW PLASTIC GMBH

Germany

Designing and manufacturing thermoplastic parts is our speciality. This includes developing innovative ideas, intelligently creating modular tools and making moulds as well as the small series and mass production of plastic parts. Numerous customers from the furniture industry, as well as from the trade fair, shop, fence and machine construction industry, appreciate our professional expertise, our innovative spirit, our focus on pricing and especially the delivery reliability with a high quality level. We are available to you at all times with professional specialist knowledge on all aspects of plastic processing. Whether it is a matter of mass-produced items or specific design problems – our decades of experience guarantee solutions tailored to your needs. We combine planning, designing and manufacturing under one roof. Thanks to this direct collaboration within manufacturing, we have the greatest flexibility in the plastic processing industry to make your requirements a reality.
KARL JUNGBECKER GMBH & CO

Germany

Jungbecker has two supporting pillars as a company: Creative ideas of light control and guidance and innovations for electromechanical components to meet the highest requirements. Light-directing optical elements with microprisms by Jungbecker make light malleable, efficient and intelligent. Light is also a colour activator, can influence moods, provide ergonomics and serves as a safety factor. Jungbecker's motivation is to explore these limits and to open up new fields of application in the various optical disciplines. Wherever processes take place or processes are to be monitored by sensors, electrical engineering is used. Microelectronically controlled drive elements and sensors ensure efficient motor management, perform safety functions and ensure comfort and well-being. With a strong upward trend. To this end, we develop and produce high-tech composite parts made of plastic and metal in which electronic circuits are integrated.
MONTFORT KUNSTSTOFFTECHNIK GMBH

Austria

MONTFORT Kunststofftechnik GmbH is a manufacturer of solutions based on plastic injection moulded parts. In doing so, we strive for a cooperative partnership with our customers in which we can contribute more than just pure plastic parts. We provide your with support right from the design stage and beyond. Our in-house design and development department keeps the focus of its work on economic production possibilities . Using prototypes, concepts can be tested and increased costs can be avoided during the subsequent implementation in the injection mould. Our key area of expertise is in the production of plastic parts by injection moulding, for which we use modern machinery and clean production in accordance with current guidelines. Our products are manufactured and assembled in a fully automated and sustainable manner in a carbon-neutral process under clean or even clean room conditions. Our quality management system is certified according to ISO 9001: 2015 and ISO 13485: 2016 (medical devices).
MUES PRODUCTS & MOULDS

Germany

The company MUES PRODUCTS & MOULDS, is a Manufacturer/ Producer, which operates in the Injection moulding of rubber and plastic industry. It also operates in the pad printing, and Technical-grade plastic parts industries. It is based in Kolbermoor, Germany.