brass bars

...Railing made of brass with bars of transparent Plexiglas. Current handle from brass platband. Brass can be mirror polished, patinated or brushed. Delivery time 90 days. Price per linear meter with installation included. code:6F6016...

...Brass Casting Services in various alloys. Production of any type of part in Brass Casting.

...Kigema applies gravity casting to produce plates and bars using all copper alloys covered by global standards: PN-EN 1982, DIN 1705, 1709, 1714, PN 91/H-87026, ASTM B271, BS 1400 and using special alloys too. Diameters range:10 -1100 [mm] Minimum wall thickness:500 [mm] Maximum weight:4 tons...

...CNC turning is a manufacturing process in which bars of material are held in a chuck and rotated while a tool is fed to the piece to remove material and create the desired shape. A wide variety of materials can be used in CNC turning, including:Aluminum, brass, bronze, copper, hardened metals, precious metals, stainless steel, steel alloys,ABS...

...Brass Side Entry Take-Off Valve MAIN FEATURES - Brass body, compliant with standard NF EN 1216X - Operating square in cast iron (30 x 30 mm) - Nickel-coated brass ball - Boss: male thread - Metric pitch (PB or GB) - PFA (Permissible Operating Pressure): 16 bars - PEA (Permissible Test Pressure): 24 bars Boss: Male thread - Metric pitch (PB or GB) Test pressure: 24 Bars...

...Key width (mm): from 2.5 to 110.0 Hexagonal rods made of brass Key width (mm): from 2.5 to 110.0 DIN: 17660, 1763, 17672...

The Trafilerie Carlo Gnutti has its production facility located in the municipality of Chiari in the province of Brescia, at Via San Bernardino 23/A. The Trafilerie Carlo Gnutti offers its national and international manufacturing clientele an excellent production of brass semi-finished products at attractive costs and under particularly favorable conditions. They have indeed invested in acquirin...

... copper. A bright representative of this range is L63. Brass which contains 63% copper and 37% zinc. Special brass contains more than two elements. The name contains more designating signs due to additional alloying components of the periodic table. A bright representative on the market of brass ЛС59 1, one more percent of lead is concentrated there. From the above, the brightest representatives of...

...Available in 10 days Discover our collection of wall-mounted towel bars in brushed gold finish, to perfect your bathroom! Available in different lengths, our towel bars can fit any wet room. Materials: Brass + stainless steel alloy Wall mounting: included Finish: brushed gold...

...The tactile bars are made of brass. Overall dimensions: length 280mm x width 30mm x thickness 3.5mm.

...In the field of turning technology, we can offer you a range of prototypes, pilot series, and small series, as well as the production of large series as a capable partner. We process all materials such as automatic, heat-treated, stainless steels, aluminum, brass, copper, and more! max. diameter for processing bars and/or coils: Ø 65 mm max. diameter for processing sections: Ø 380 mm max. processing length: 500 mm all common heat and surface treatments available assembly of components and more… We are also happy to assist you as a competent and efficient partner in the area of contract turning!

...7635 LUXURY BRASS TOOTHBRUSH HOLDER - Hotel and Restaurant Equipment...

Representing entrepreneurs and communities around the world since 2014 Headquartered in Varberg, Sweden since 2014, we are creating satellite offices in other geographical areas to better ensure your satisfaction. We are also located in: Hong Kong, Singapore, Taiwan, Portugal, representing creative clients worldwide. Our company specializes in all matters of intellectual property, from the idea to...

... iron, copper, brass, silver steel, tool steel, precision steel round bars sanded, quality steel/construction steel Benefits: - Robustness: High strength and durability. - Adaptability: Available in various materials and sizes. - Versatility: Ideal for diverse construction and manufacturing projects. Trust the Eder Group for your round tube needs and benefit from our years of experience and commitment to quality.

...Round ∙ Square ∙ Flat ∙ Hexagonal bars + Bushings Pressed ∙ Drawn ∙ Extruded Diameter 3 – 350 mm Cut to fixed lengths or in production lengths Flat bars in intermediate dimensions cut from plates Special brass ∙ Red brass ∙ Tin bronzes Aluminum multi-material bronzes ∙ Nickel silver ∙ Copper-nickel Available upon request with factory certificate or inspection by a certification body Manufacturing process: Pressed...

... • Special alloys upon customer request Delivery lengths: • Up to 4,000 mm • Fixed lengths according to customer specifications Flat bars: • Finished size: 22 x 12 mm to 330 x 28 mm • Delivery size: 24 x 14 mm to 332 x 30 mm Tolerances: Outer diameter (OD): • + 0.6 mm, - 0.0 mm Inner diameter: a) - 1.0 mm, + 0.0 mm up to 100 mm OD b) - 1.5 mm, + 0.0 mm over 100 mm OD Finished size: 22 x 12 mm to 330 x 28 mm Delivery size: 24 x 14 mm to 332 x 30 mm...

... adjustment of point density according to the required size and depth of marking. Technique:electromagnetic, indent, dot peen, impact Material:metal, plastic, aluminum, for hardened materials, brass, for stainless steel Configuration:benchtop, manual Applications:data matrix, tubes, industrial, plates, pipe, bars, aluminum profiles, medical instruments... Other characteristics: compact, automatic, pneumatic, high-accuracy, semi-automatic, programmable, deep marking... X travel:100 mm (4 in) Y travel:120 mm (5 in)...

... and metals. The turning process allows for complex external geometries and internal bores to be generated. Our turning capacity is available for prototypes through to low-volume production. CNC Turning is a manufacturing process in which bars of material are held in a chuck and rotated while a tool is fed to the piece to remove material to create the desired shape. A turret, with tooling attached is programmed to move to the bar of raw material and remove material to create the programmed result. ...

...Grillo-ZEP® are lead-free zinc-based alloys as an alternative to brass rods.

...,Aluminum Alloys,Copper & Brass Lead Time for samples:15-30days according if need tooling or molds Available Certificates:COC (material certificate), Test Report, ROHS / SGS, plating report or coating reports Price terms:FOB Ningbo, CIF,EXW Packing:Paper cartons then put in Pallet...

...THE WIRE, OUR PASSION The specialist in piano wire since 1950 Bars - Bars - Stäbe Manufacturing of bars - Transformation of steel wire into bars Spring steels - Stainless steels - Mild steels - Nickel-cobalt alloys - Non-ferrous: Brass - Bronze - CuBe2 - Copper - Titanium - Aluminum Straightening and cutting to length: diameters 0.28 to 18 mm lengths 5 mm to 6 m Other products on request...

...PRODUCTION CAPABILITIES KEBA Fastenings’ processing capacity for Turned-Parts comprised of steel, brass, aluminum, and stainless steel bars ranges between Ø 1mm to Ø 60mm via CNC Auto Lathe, Index, and Sliding Automat machinery. The manufacturing technology and team capabilities allow for custom made parts according to customer-specific drawings. SURFACE TREATMENT • Browning • Anodised • KTL • Zinc - Lamella • Galvanized (blue, yellow, black) • Zinc - Iron • Zinc - Nickle Powder • Phosphating • Chrome • Copper...

... orbital installation. Variants: — SPECIAL ARGON REGULATOR with double flow meter, brass — SPECIAL ARGON REGULATOR with double flow meter for H2 gas, brass — SPECIAL ARGON REGULATOR with triple flow meter, brass...

...We produce precision machined components from 2mm to 52 mm diameter. Our customers are from automotive, electro, white goods, hydraulic, pneumatic and machine building industries. Using up to date production and quality equipment we can offer machining of parts from different raw materials like: Stainless steel (austenitic, ferritic, martensitic) Aluminum (bars or casted parts) Carbon and hardened steel (ETG, forged steel, steel for heat treatment) Brass Products for automotive industry. sensor housings screws pins pivot pins shafts connectors bolts washers bushes nuts...

...GBM performs turning of round bars with a diameter of ø65 on aluminum and its alloys, aluminum die castings, brass castings, ecobrass, and steel. This process takes place on multitasking turning centers, executing milling, boring, and threading operations in-house. All of this is done according to the technical drawing and specifications provided by the customer.

...IP 54 CONTACT: 1 NO + 1 NC DRY CONTACT DISTRIBUTORS: 5/2 monostable NOMINAL DIAMETER: 7.5 mm CONNECTIONS: In G1/4'' OPERATING TEMPERATURE: + 60°C OPERATING PRESSURE: 2 to 10 bars BODY: Anodized aluminum SPRING: Stainless steel SEALS: NBR SLIDE: Nickel-plated aluminum INTERNAL PART: OTS8 brass PROTECTION: Shock-resistant plastic...

...The evolution of the market in the field of rolled and forged products has found in Metal Leghe a company capable of always being a leading player. For this reason, we have been able to internally develop an extremely flexible rolling line to produce rectangular section bars made of aluminum bronze and brass alloys, with widths ranging from 30 mm to 500 mm, and heights between 20 mm and 200 mm...

TRADE OFFER ORDER AND DELIVERY PROCESS 1) Start regarding quantity, stock levels, delivery times 2) Inquire about anything you are interested in regarding the goods 3) Conclude the contract, order for a fee 4) Payment immediately after delivery 5) Minimum order: 20 tons/1 truck, mixed possible We operate on behalf of and for the account of: IMPERIA SWISS AG, company number CHE-427.234.917 Goods d...

...Bars, Tubes, and Profiles Standard length or custom cut Dimensions upon consultation Possible alloys: Aluminum, Stainless Steel, Titanium, Steel, Brass...

...Brass Ms58 It is an alloy of copper and zinc, and is known for its strength and durability. Brass Ms58 is often used in the production of plumbing fixtures, door hardware, and musical instruments. This material has excellent hot formability and can easily be soldered or brazed. It is also suitable for use in the sanitary industry, engine and vehicle construction and swivel parts. It has very good free-cutting. It offers a number of advantages over other materials, such as its ability to resist corrosion and its low cost.