Automotive connector - Import export

We have over 10 Million Lines of Components in our Supply. We Supply a lot of the main Brands of Autmotive Connecotrs such as TYCO, Molex, Deutsch, Yazaki, Sumitomo, and more! Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

STOL®76 is a precipitation hardened CuNiSi alloy for applications in the automotive, electrical and electronics industries. This alloy is particularly suitable for components in the medium strength range (up to 620 MPa). The combination of good electrical conductivity and good relaxation resistance makes this alloy especially recommendable for automotive connectors.

On requst: Non-contacting, cost-effective NOVOHALL rotary sensor with integrated connector for automotive applications.

STOL®78 is a CuMg alloy for connectors in automotive, electrical and electronic applications. Thanks to the combination of high electrical conductivity with high strength and good relaxation resistance, this alloy is particularly suitable for relays, current carrying springs, bus bars and fuse boxes with resilient functions.

Non-contacting, cost-effective NOVOHALL rotary sensor with integrated connector for automotive applications. Available on request! For further information please contact: automotive@novotechnik.de, +49 711 4489-222 Automotive-Applications.pdf

Bulk flat flexible cables flexlink® are made with flat conductors insulated with polyester film for any application where space reduction and flexibility are the most important criteria. Bulk flat flexible cables are compatible with the most commonly used crimp contacts. They are flexible and allows for space saving. They are made with 1.27 mm and 2.54 mm pitch flat copper conductors insulated with polyester films. They can be used in consumer electronics (printers, computers, …), automotive (switch rotary connectors, headliners, door panels, …)

Full range of automotive and components range from TE Connectivity, DEUTSCH, Sumitomo, Bosch, Lear, EAO, Valeo and XB Components. Connectors, Terminals, Electric Vehicle, Relays, Clutch Kits, Cooling and Air Management, Switch Systems, Rotating Electrics, Wiper Systems, Pushbuttons and Accessories

The ESX-3CS is a compact, robust and efficient control unit. In addition to the ESX-3CM, an ESX-3CS (C = Compact, S = Small) rounds off the third generation of ESX control units. The “C” stands for “Compact” and indicates that all pins are fixed assigned prior to the hardware definition. The functions of these pins can be defined in more detail using software. Both control units are also suitable for safety-oriented applications up to Performance Level PL d or Safety Integrity Level SIL 2, and are based on a common architectural concept: The robust aluminum die cast housing with automotive plug-in connectors contains a fast 32-bit microcontroller with four MB Flash and eight MB SRAM, up to two CAN interfaces, one serial interface, Ethernet, LIN and two LEDs.

In addition to the ESX-3XL (L for Large), an ESX-3XM (M for Medium) is also available, which accords approximately with half an ESX-3XL with regard to the construction size and the number of inputs/outputs.Both control units are suitable for safety-oriented applications up to Performance Level PL d or Safety Integrity Level SIL 2, and are based on a common architectural concept: The robust aluminum die cast housing with automotive plug-in connectors contains a fast 32-bit microcontroller with six MB Flash and four MB SRAM, four CAN interfaces, one serial interface, one buzzer and several LEDs.

The ESX-3XM is a robust and efficient control unit. In addition to the ESX-3XM ((X = Expandable, M = Medium)), an ESX-3XL (X = Expandable, L = Large) is also available, which approximately accords with a double ESX-3XM with regard to the construction size and the number of inputs/outputs. Both control units are suitable for safety-oriented applications up to Performance Level PL d or Safety Integrity Level SIL 2, and are based on a common architectural concept: The robust aluminum die cast housing with automotive plug-in connectors contains a fast 32-bit microcontroller with six MB Flash and four MB SRAM, four CAN interfaces, one serial interface, one buzzer and several LEDs.

The ESX-3CM is a compact, robust and efficient control unit. In addition to the ESX-3CS, an ESX-3CM (C = Compact, M=Medium) rounds off the third generation of ESX control units. The “C” stands for “Compact” and indicates that all pins are fixed assigned prior to the hardware definition. The functions of these pins can be defined in more detail using software. Both control units are also suitable for safety-oriented applications up to Performance Level PL d or Safety Integrity Level SIL 2, and are based on a common architectural concept: The robust aluminum die cast housing with automotive plug-in connectors contains a fast 32-bit microcontroller with four MB Flash and eight MB SRAM, up to four CAN interfaces, one serial interface and several LEDs.

High-flexible copper-based ropes, enclosed by an additional braid, made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.35 mm² to 120 mm² (bigger cross-sections upon request). Our ropes with overall braids are characterised by their good flexibility and their excellent mechanical strength. The overall braid has a vibration-reducing function and prevents unrevelling of the rope. Ropes with overall braids are mainly suitable for automotive, industrial applications and for connectors.

TYP D 020 Automotive Press for pressing of rivet nuts, connectors, etc. Usage To reline of these connectors Automotive Press was formerly developed. Meanwhile, this device will multiply its application when it comes to press- fit components into the PCB (eg connectors). Also for joining several PCBs or PCB components, the press can be used. Operation Through the use of different tool inserts, which can be easily replaced in the nut tool, different assembly operations can be greatly facilitated, that have often been carried out laboriously on a toggle press. Due to the size of the motor press D 020 can be permanently mounted in the workplace or on a mounting bereitgestelllt car. The operation is simple: the circuit board is inserted with the part to be pressed in the operating range of the device against the stop. Then a limit switch triggers the workflow. By a nearly closed guard is no danger to the operator.