Building - Import export

The plaster support grid is used as a reinforcement for cement mortars, coatings, plasters, etc.

Flexible, crack-bridging two-component waterproofing. As a flexible waterproofing in interior and exterior areas for the creation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 250 Flex is a universally applicable flexible Waterproofing slurry for a wide range of applications. Due to its high waterproofness and resistance, it can even be used with corrosive media. Packaging unit: 10 kg bucket, 240 kg per pallet, other packaging sizes on request – Article-No.: 1315

Versatile environmentally friendly repair mortar for concrete and masonry. For repair and coating work. Maleki-RM 500 is ideal for filling holes and cavities, especially on wall surfaces. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1416

Solvent-free deep penetrating primer to reduce the absorbency of mineral substrates. Versatile primer for various applications. Maleki-TG 110 is used as a system product in all product systems and ensures a bubble-free surface with improved adhesion to the substrate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1110

Abrasion resistant sealant for industrial floors with high surface strength. Increases the chemical resistance of the substrate. Maleki-VS 930 is also used as a system product for unpolished Lithokor design floors. Packaging unit: 7 kg container (single), other packaging sizes on request – Article-No.: 1828

Versatile silicate sealant for mineral wall and floor surfaces. Ideal for polished substrates. The material only forms very thin layers which does not affect the look and feel of high-quality mineral surfaces like Terrazzo floors. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1811

Shrinkage-free fast-setting mortar for construction. Hardens fast and with low tension. Can be mixed with quartz sand for higher layer thickness. Maleki-VM 530 is ideal for filling holes and cavities. Due to the rapid setting of the mortar, surfaces can be prepared quickly and cost-effectively for further coating work. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1442

High performance and extreme acid resistant mortar for protection of mineral substrates in acid-proof installations and industrial areas. Extreme high chemical resistance at the range of pH 0 – 14 according to EN 12808. Maleki-TPC 200 sets new standards in the protection of mineral surfaces against high acid loads and extreme thermal stresses. Maleki-TPC 200 can withstand both concentrated acids and temperatures of up to 1350°C. Both existing and new concrete surfaces can thus be permanently protected. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1310

White binder for self-compacting Terrazzo floors. Hardens fast and with low tension with a layer thickness of up to 60 mm. Maleki-Terrazzo Binder is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. Maleki-Terrazzo Binder can be used to create individual and unique decorative floor surfaces. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1448

Innovative waterproofing with high chemical resistance for canal and industrial construction. Waterproof up to 1.5 bar at a layer thickness of 4 mm. Maleki-SWP 270 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected against stress for longer against stresses that occur. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1312

Innovative and environmentally friendly smoothing mortar. Hardens fast and with low tension with layer thickness up to 30 mm. Maleki-SM 735 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1515

High performance, environmentally friendly silicate mortar for sewage water areas. Extreme resistance against chemicals in the range of pH 0 – 14. Maleki-SBS 860 is ideal for protecting mineral surfaces against corrosive influences. Both existing and new concrete surfaces can be protected for longer against stresses that occur. The material is an ideal supplement for work in higher layer thicknesses and can be used in combination with Maleki-SWP 270. Packaging unit: 15 kg bucket with 3x 5 kg LDPE bags (360 kg / pallet), 5 kg LDPE bags in a pallet carton (500 kg / pallet) – Article-No.: 1520

Innovative silicate impregnation and subsoil consolidation. Protects against penetrating moisture in masonry and concrete. Maleki-LL 100 can be used universally to protect cementitious surfaces. The material does not form layers and does not affect the diffusion permeability of the mineral substrate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1810

Self-leveling industrial floor for high chemical and thermal load. Class C50-F10-A12 according to EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 500 is the perfect solution for areas with the highest demands on mechanical, chemical and thermal resistance. Choose for quality, sustainability and performance with Maleki-IFS 500. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1435

Self-leveling industrial floor of strength class C50-F10-A9 in accordance with EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 400 is the perfect solution for areas with the highest demands on resilience and environmental protection. Choose for quality, sustainability and performance with Maleki-IFS 400. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1410

Self-leveling, flexible floor mortar for critical substrates. Can be used as an intermediate layer on cracked surfaces. Maleki-FS 440 is used wherever cracked substrates make processing with conventional levelling compounds impossible. The treated surfaces can then be further coated with Maleki floor levelling compounds, depending on the intended use. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1413

Self-leveling flowing screed of strength class C40-F7 in accordance with EN 13813. Hardens with low tension with a layer thickness of 5 – 70 mm. Maleki-FEC 370 is ideal for surfaces where a cost-effective solution for higher layer thicknesses is required. The treated surfaces can then be further coated with Maleki floor levelling compounds, depending on the intended use. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1429

Innovative silicate densifier. Protects against penetrating moisture and chemical stress. Maleki-DW 100 can be used universally to protect cementitious surfaces. The material does not form layers and does not affect the diffusion permeability of the mineral substrate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1815

One-component mineral filling and reprofiling mortar for the preparation of a waterproof coating on concrete or other cementitious substrates. Maleki-DS 240 is a universal waterproofing mortar for a wide range of applications. The material is an ideal supplement for waterproofing work in thicker layers and can be used in combination with Maleki-DS 220. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1329

One-component mineral waterproofing slurry. For the preparation of a waterproof coating on concrete and other cementitious substrates. Maleki-DS 220 is a universal waterproofing mortar for a wide range of applications. Thanks to its high waterproofness and durability, it can be used even under the most difficult conditions. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1314

Self-leveling design floor coating of class C40-F10-A12 in accordance with EN 13813. Hardens fast and with low tension in a layer thickness of 2 – 40 mm. Maleki-DFS 430 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1433

White or colored, self-leveling design floor of class C40-F10-A12 according to EN 13813. Hardens fast and with low tension in a layer thickness of 1 – 30 mm. Maleki-DFS 410 is part of our Lithokor design system. Lithokor design products give every room a unique design and ensure a healthy indoor climate. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1415

Easy-to-use, self-leveling floor coating of strength class C35-F7-A22 in accordance with EN 13813. Hardens with low tension in a layer thickness of 2 – 50 mm. Maleki-BV 310 is ideal for surfaces where a cost-effective solution is required. Suitable both as a levelling layer and as a final coating for lighter loads. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1412

- Standard MDF cut to size. - Prompt, precise cutting. - Delivery within 1-8 working days. - Same day, or next day, collection available (subject to order size). - Panels ordered 1220mm and/or 3050mm will have an untrimmed, factory finished, edge.

SIMPLE APPLICATION, KALSEDON STONE PANEL PREFERED TO MAKE YOUR SPACES BEAUTIFULL WITH SPECIAL DESIGN

SIMPLE APPLICATION, KALSEDON STONE PANEL PREFERED TO MAKE YOUR SPACES BEAUTIFULL WITH SPECIAL DESIGN

SIMPLE APPLICATION, KALSEDON STONE PANEL PREFERED TO MAKE YOUR SPACES BEAUTIFULL WITH SPECIAL DESIGN

SIMPLE APPLICATION, KALSEDON STONE PANEL PREFERED TO MAKE YOUR SPACES BEAUTIFULL WITH SPECIAL DESIGN

SIMPLE APPLICATION, KALSEDON STONE PANEL PREFERED TO MAKE YOUR SPACES BEAUTIFULL WITH SPECIAL DESIGN