Cover seals - Import export

Static sealing solutions for gearboxes

Load capacity: 15 kN test load EN 124. Material: Frame made of aluminium extruded sections. Cover made of 3/5 mm aluminium chequerplate. Aluminium reinforcement to the underside. Stainless steel screws. Features: Sealed cover. EPDM seal. Completely rust-proof. Light weight. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly where corrosion-resistance and/or low weight are of great advantage. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 3.5 cm Total height including reinforcement of bottom ≈ 7 cm Special sizes possible *S = available from stock *O = to order

LOAD CAPACITY: 125 kN test load EN 124. MATERIAL: Frame and cover sections in extruded aluminium. Stainless steel screws. FEATURES: Sealed access cover in high-quality finish. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy-to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement. THE LIFT-OFF OPENING SYSTEM: Every HAGODECK Type BVA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. APPLICATIONS: Inside buildings where it is important to obtain a nice visual effect. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion...

Load capacity: 15 kN test load EN 124. Material: Frame made of 2 mm cold formed precision steel profiles. Hot dip galvanised. Durbar-plate cover. Features: Sealed cover, flat design. EPDM seal. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly for inspection chambers. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 6 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 125 kN test load EN 124. Material: Grade 304 stainless steel. Passivated after welding. Also available in grade 316 stainless steel on request (no stock item). Features: Accurately manufactured fully sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. The Lift-Off opening system: Every HAGODECK Type BVE stainless steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where exceptionally high standards are needed or where the hygienic properties of stainless steel are preferred, e.g. in the food industry, in meat-processing areas, dairies, hospitals, swimming pools. For indoor swimming pools only use grade 316 material! Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Accurately manufactured sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where sealed covers are required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Standard version (not sealed). Type B should only be used where the “sealed” characteristic is not required. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement, crosswise welded. Opening: Every HAGODECK Type B steel cover comes with a set of lifting keys and precise installation instructions. Applications: Inside buildings over sealed inspection fittings or installations where a fully sealed cover is not needed. Installation: Installation must be carried out according to our instructions.

Load capacity: pedestrian Material: Frame fabricated from rolled sections, durbar-plate cover. Hot dip galvanised. Features: Simple durbar-plate pedestrian area cover with recessed fastener. Non-sealed cover. Lifting key included. Applications: For simple covers used subordinately.

Load capacity: 400 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section and additional frame. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-400 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, or for secondary traffic areas. Particularly suitable for use in areas where forklifts operate. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation heights: up...

Load capacity: 250 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-250 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, where the cover needs to be heavy duty. Installation: Installation must be carried out according to our instructions. With watertight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Steel girders penetrate ≈ 10 cm into the shaft Special sizes possible *S =...

Cost-effective solution for fire-protected shaft walls - With peripheral lip seal (silicone) against smoke penetration - Quick and easy installation. Fire resistance on duct side and room side NF EN 1634-1 : +A1 : 2018 The inspection hatch is specially designed for installation on technical ducts with one of the requirements "external and internal heat load of the duct" and a fire resistance class EI 30. It offers a safe protection against the spread of fire from a room into the duct or counteracts it. The aluminium mounting frame is equipped with a fire protection strip. The cover of the inspection hatch is filled with DF fire protection plates and protected against the passage of smoke by a four-sided circumferential seal. The cover is secured on both sides by self-adjusting safety arms. These safety arms ensure that the cover stops every time the door is opened. The cover can be easily removed and replaced

Frame made of aluminium profile bars connected by "Tox" connections - Intumescent gas, smoke and flame tight seal in case of fire - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards - Quick and easy installation The 60-minute ceiling fire dampers are designed for installation in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against fire progression from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms. The safety catching arms ensure that the lid is intercepted every time the hatch is opened. The lid is easy to remove and replace.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 30 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 30. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboard Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018EN 1634-1: +A1: 2018 Fire dampers EI 60 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 90 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 90. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Load capacity: 125 kN test load EN 124. Material: Frame and cover sections in extruded aluminium. Features: BVA-RA alu largely sealed (design similar to BVA): New modular system with huge advantages. The frames are joined lengthways to special connecting elements. For larger covers (from a length of approximately 3 m), the HAGO multi-part cover is delivered disassembled, ready for assembly on site. Patented cross-beams: The cross-beam system is registered as Patent no. 396796. The cross-beams can be easily removed without tools, to give clear access to the entire duct. Cross-beams are easy to insert and fix in place. They can be taken out again very easily if the entire duct needs to be freely accessible, e.g. when retrofitting pipes or when undertaking repair work in the duct. The Lift-Off opening system: Every HAGODECK Type BVA-RA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning...

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Fire protection panel on stainless steel Z-brackets, fire-resistant seal. Features: Accurately-manufactured smell proof access cover. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. Fire test certificate: The Austrian test certificate issued by the Institute for Fire Protection Technology and Safety Research (IBS) confirms that HAGODECK Type BV-F90 steel resists a fire for 90 minutes and thus significantly contributes to safety in the event of a fire. In accordance with EN 13501-2, Type BV-F90 is classified in fire resistance class REI 90 (a ↔ b). The Lift-Off opening system: Every HAGODECK Type BV-F90 steel cover comes with a set of lifting keys and precise installation instructions. After lifting out the cover, the fire protection panel can be removed using its grab handle. The shaft is...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

NSPV Dust cap for solar connectors L03002-001/002 types Features: EPDM insulation material; Flame class for UL94-V0; Used to protect electrical system from dust during panel disconnect; Fits for MC4 connectors.

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Load capacity: pedestrian Material: BV-shallow: frame and cover in 2mm cold formed precision steel profiles, hot-dip galvanised. BVE-shallow: frame and cover made of grade 304 stainless steel. Features: Sealed. Cover with an installation depth of only 5 cm. Particularly suitable for situations where greater installation depth is not available. Since the cover is shallower, this means that it is not so heavy when filled in - so less effort is required to lift the cover. The bottom of the cover is reinforced. EPDM seal. Tapered design allows easy opening. Steel reinforcement guarantees good adhesion between the concrete infill and the bottom of the cover. The Lift-Off opening system: Every HAGODECK Type BV(E) shallow cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For pedestrian use inside buildings and their surroundings. Installation: Installation must...

Load capacity: 125 kN test load EN 124 when completely filled with concrete C35/45 (EN 206-1). Material: In Type BV-RA frame, cover and cross-beam in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. In Type BVE-RA frame, cover and cross-beam made of grade 304 stainless steel (on request also available in grade 316 stainless steel). EPDM seal. Features: Smell proof, largely water-tight multi-part cover (Not guaranteed to be completely water-tight). The cross-beams can be removed without tools, to give clear access to the entire duct. This gives clear access to the duct when retrofitting pipes or during repair work. Versions: In addition to the standard cover height (approx.50 mm), a deep cover version (approx. 100 mm) is available. Ideal for infill with paviors. The Lift-Off opening system: Every HAGODECK Type BV(E)-RA cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the...

NSPV Dust cap for solar connectors L03001-001/002 types Features: EPDM insulation material; Flame class for UL94-V0; Used to protect electrical system from dust during panel disconnect; Fits for PV4.0 solar connectors.

Load capacity: 125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C 35/45 concrete (EN 206) Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Sealed cover with 10 cm deep recess. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement, crosswise welded. Opening tool included. The Lift-Off opening system: Every HAGODECK Type BVH-maxi steel cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings and their surroundings. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 10.2 cm Installation height ≈ 12.5...

Load capacity: 250 kN or 400 kN test load (EN 124) when filled with a min. 5 cm concrete. Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy-duty sealed cover with 10 cm deep recess. Underside of cover reinforced with steel girders. In Type BVHS 400, the frame is reinforced with an additional frame. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BVHS cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For use in vehicle traffic areas in industrial buildings and areas surrounding buildings or for secondary traffic areas (pedestrian zones). Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the...

Load capacity: 15 kN test load EN 124. Material: Frame, plate and reinforcement in grade 304 stainless steel. Features: Sealed cover. EPDM seal. Completely rust-proof. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly where absolute corrosion-resistance is of great advantage. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring.