Ropes - Import export

E-glass is the basic material for isoGLAS®. Texturing guarantees a large storage volume and thus good insulation properties. isoGLAS® products are extremely textile and harmless to health. Available dimension: 3 - 30 mm.

round wires for crane ropes, lift ropes, lifting systems, mining ropes, forestry applications, architectural ropes, ropes for automotive and aviation, special ropes for offshore technology, profile wires for special applications, fully locked / semi-locked ropes for tensioning systems, mountain railways, transport systems, profile wires for reinforcements in the offshore sector.

Black cord for crowd control systems with golden hooks

Red cord for crowd control systems with golden hooks

Black Velvet rope for crowd control systems with golden hooks

Red Velvet rope for crowd control systems with gold hooks

Black cord for crowd control systems with satinized hooks

Red cord for crowd control systems with satinized hooks

Black Velvet rope for crowd control systems with satinized hooks

Red Velvet rope for crowd control systems with satinized hooks

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

These vertical aluminium hoists have already proved their many ways of application for various kinds of use thousands of times. They are easy, quick and reliable transport units for interior work, refurbishment or repairs on flat roof buildings. GEDA can offer the appropriate load receptacle for any kind of building material and any kind of use. Save time and strength by using a GEDA inclined hoist! Transportation elevators are useful for every work – indoor and outdoor. The ladder systems can be used to transport all kinds of materials to the upper levels of a building. For moving furniture, interior constructions, façade renovations or the restructuring of flat roofs, inclined lifts offer the perfect assistance. Due to the movable end, the transportation goods can easily be unloaded from the platform. This prevents back pain and facilitates the work.

Rope hoists especially for scaffolders Two lifting speeds, an overload protection and a slack rope switch as well as a variety of different load receptacles make these fast scaffold assembly hoists the ideal tool for rationally and safely transporting scaffold components and building materials. You do not need to transport the handy drive of the rope drum to the top. It can simply be installed to the scaffold on the bottom. You can install the lightweight swivel arm in the desired height to the scaffold on the top. Quick assembly and their easily being moved are the biggest advantages of the GEDA scaffold assembly hoists. The maximum working height of 40m can be extended to 76m if you install the winch in a higher position. Apart from scaffolders, it is mainly roofers and painters who use these speedy tools to transport their materials onto the scaffold.

Inclined hoists from GEDA have been produced for decades. Their reliability makes them a favourite transport device for roofers and construction workers. These aluminium hoists have already proved their many ways of application for various kinds of use thousands of times. They are easy, quick and reliable transport units for interior work, refurbishment or repairs on flat roof buildings. GEDA can offer the appropriate load receptacle for any kind of building material and any kind of use. Save time and strength by using a GEDA inclined hoist! Transportation elevators are useful for every work – indoor and outdoor. The ladder systems can be used to transport all kinds of materials to the upper levels of a building. They enable a maximum height of 19 m and lifting speeds between 19 m/min and 38 m/min. For moving furniture, interior constructions, façade renovations or the restructuring of flat roofs, inclined lifts offer the perfect assistance.

Rope hoists for the transport of materials on every construction site You can install the lightweight swivel arm hoist to any place of the building, like to a scaffold, to window openings, between the storeys or on the roof. These hoist can be used quickly and easily even under difficult circumstances. You can reach a working height of up to 50m. The multitude of the intelligently designed fixing devices and practical load receptacles makes these reliable units universally applicable. As it is possible to separate the electrical winch from the swivel arm, the hoist can be assembled by one person. Save a lot of time and work force on construction sites using the GEDA swivel arm hoists!

Inclined hoists from GEDA have been produced for decades.Their reliability makes them a favourite transport device for roofers and construction workers. These aluminium hoists have already proved their many ways of application for various kinds of use thousands of times. They are easy, quick and reliable transport units for interior work, refurbishment or repairs on flat roof buildings. Fulfilling Various Tasks with GEDA’s Inclined Hoists Transportation elevators are useful for every work – indoor and outdoor. The ladder systems can be used to transport all kinds of materials to the upper levels of a building. They enable a maximum height of 19 m and lifting speeds between 19 m/min and 38 m/min. For moving furniture, interior constructions, façade renovations or the restructuring of flat roofs, inclined lifts offer the perfect assistance. Due to the movable end, the transportation goods can easily be unloaded from the platform.This prevents back pain and facilitates the work.

Rope hoists especially for scaffolders Two lifting speeds, an overload protection and a slack rope switch as well as a variety of different load receptacles make these fast scaffold assembly hoists the ideal tool for rationally and safely transporting scaffold components and building materials. You do not need to transport the handy drive of the rope drum to the top. It can simply be installed to the scaffold on the bottom. You can install the lightweight swivel arm in the desired height to the scaffold on the top. Quick assembly and their easily being moved are the biggest advantages of the GEDA scaffold assembly hoists. The maximum working height of 40m can be extended to 76m if you install the winch in a higher position. Apart from scaffolders, it is mainly roofers and painters who use these speedy tools to transport their materials onto the scaffold.

Rope hoists especially for scaffolders Two lifting speeds, an overload protection and a slack rope switch as well as a variety of different load receptacles make these fast scaffold assembly hoists the ideal tool for rationally and safely transporting scaffold components and building materials. You do not need to transport the handy drive of the rope drum to the top. It can simply be installed to the scaffold on the bottom. You can install the lightweight swivel arm in the desired height to the scaffold on the top. Quick assembly and their easily being moved are the biggest advantages of the GEDA scaffold assembly hoists. The maximum working height of 40m can be extended to 76m if you install the winch in a higher position. Apart from scaffolders, it is mainly roofers and painters who use these speedy tools to transport their materials onto the scaffold.

Because of their specifications governed by corresponding standards, these cable pull switches are used exclusively as safety command devices. These switches are available in metal enclosures as well as in insulation-enclosed versions. They are operated manually by pulling on the attached cable. The basic design of the standard rope pull switches is based on that of position switches. — Versions available in plastic and metal — With and without latching function — Max. span length: 2 x 75 meters — Protection class IP 65 according to IEC/EN 60529 — Ambient temperature -30°C to +80°

Item No.: 335023 Guy rope Specification Guy rope Braided elastic with buttonholes, with stitched-on plastic hook Model type: C (Customised) Dimension: approx. 20.0 mm wide Material: Rayon Colour: natural white Property: elastic Elastic Material: Natural rubber Packaging: in PE bag Note Features: Buttonholes made during braiding process, stitchable plastic

Demag rope hoists feature high handling rates, cost-effective operation and maximum safety. As basic hoist units for integration into plant and machinery or as lifting solutions with electronic controls that are optimized for crane applications, with our wide range of rope hoists we offer the optimum solution to meet our customers' specific requirements for efficiently lifting loads weighing up to 100 tonnes.

Shock reducing elements by LEBENDämpfungstechnik GmbH known as hydrostatic, viscoelastic or elastofluid shock absorbers with an integrated springdamper operating principle. Advantage Use in pulling and pushing direction Small design Very high preload of the shock absorber Individual reset force of the piston rod depending on the application Used as a buffer in Railway couplings Water locks / sluices … Illustrated hydrostatic buffer Damping of the pretensioned rope catch (tensioned catch rope) in front of a water lock

Wire Rope Cutters

Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel

Wire rope clip similar DIN 741 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Wire rope clip similar DIN 1142 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium

Rope-operated two section rung ladder Working height: 8,45 m - 9,85 m

The processing of granules into coated long products requires high precision with tools and machine settings as well as sound expertise in the specific characteristics of the materials. As an extrusion specialist of steel cables and other long products such as wires, glass-fibre rods, we offer a wide service range: Plastic coating from ca. 0.5 to 24mm, PA, PE, PP, PUR and PVC and more, additives for special requirements, such as the UV and water resistance, circular cross sections and special dimensions and stock colours or your own selection.