Threads- special - Import export

DryLin® R shafts and supported shafts - Technical data DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM Aluminum Low weight Lower wear of the plain bearing Corrosion resistant Ideal in combination with liners made of iglidur® J/J 200 Delivered off the shelf Steel Low-priced standard High load capacity Application in dry area Hard chrome-plated also available Lower coefficient of friction against plastic bearing Stainless steel High corrosion-resistance High resistance to chemicals Ideal solution for the wet area V4A for extreme chemical intensive applications Female thread, axial male thread Pins Groove cut-in Spanner flat Female thread, radial Special machining All shafts can be individually machined. Please send us your drawing. We'll submit an offer to you in a short time. Shaft request

K-TITE high-performance thread rolling fasteners are specially designed to lower your in-place fastening costs. K-TITE fasteners form internal threads into plain holes in ductile materials upon initial installation, which: • Eliminates the need to pre-tap the nut member • Reduces problems associated with assembling screws and bolts into pre-tapped holes, such as cross-threading

Wide range of products available at short notice Our delivery program in the product group flanges (ANSI B 16.5) includes the following types: Welding Neck Flanges. Slip-on flanges Loose Flanges (Lap Joint Flanges) Blind Flanges and Socked Welding Flanges Threaded Flanges Special / drawing parts. Special competence for special materials We supply flanges in the dimensions ½ "to 24" in the pressure levels 150/300/600/900/1500/2500 lbs. Our special competence lies in the delivery of special materials. The following special materials are available: Carbon Steel A 350 LF2 Chrome-Moly Alloy A 182 F Chrome-Moly Alloy A 182 F11 Chrome-Moly Alloy A 182 F 22

Special thread reducers in aluminum or steel.

PumpMaster, canister and barrel pump for petrochemical liquids. The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.

Features • Without pre-drilling in single-layer gypsum plasterboards • No cracking of the surface due to special thread geometry • In gypsum plasterboards high holding values up to 8 kg per fixing point • PZ2 driver for simple installation Description & Area of Application • Glass fibre reinforced gypsum plasterboard wall plug • Reinforced drill tip for easy installation without additional setting tool • For single layer gypsum plasterboards • Spiral + screw: Screw with PZ driver

Straight from our warehouse Approx. We always have 150 different versions of threaded outlets (ANSI B 16.11 / MSS SP 97) available in our extensive warehouse in Kamen. In our warehouse we have threaded outlets with NPT threads according to ASME B1.20.1 in stock. Threaded outlets with BSP / T threads according to ISO 7-1 and with BSP / P according to DIN ISO 228 are available with short delivery times. We only deliver goods of European origin. Standards and special requests Threaded outlets are available in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. In the case of threaded outlets, a distinction is also made between reduced and full branches. Express service We can deliver threaded outlets in stock within Germany the next day to the customer if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service.

We carry a range of standard moulded plastic cores with special bores resp. threads, which can be produced in large numbers.. If your application allows we recommend you to choose one of our standard cores. It is reasonable and advantageous concerning the delivery time and costs, for smaller quantities too.

Dimensions Depending on the required stamp power (material strength, material thickness, and part shape) Material All spring materials in soft and hard condition as well as quality steels with lower strengths and aluminum alloy and also special alloy Stainless steel up to 1900 N/m² Rubber-coated strip material Hardening Through external services Coating Fully or partly coated strip material In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Fully automated manufacturing of components and mounting Fully automated welding Contact springs with contact rivet Bushes clinched, welded, and open Special processing like thread cutting, screw mounting, and rivets feasible Special packaging in blister pack, trays or magazines Rapid prototyping

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Compact angle seat motor valve for on/off and control operation with neutral and aggressive media. A version with failsafe option is available.Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connectionsPositioner electronics, limit switch, position feedback All control actuators are also available with fail safe feature. Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version …

Angle seat motor valve for on/off and control operation with neutral and aggressive media. Universal actuator configurations with flexible accessories. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Pressure balanced version Degreased version, Silicon or PTFEfree version …

Pneumatic control valve with angle seat design. The integrated positioner type 8049 means that a compact design is achieved. All parts that come into contact with the medium are made from stainless steel. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version …

Highquality angle seat manual valve made from stainless steel, also suitable for neutral and aggressive media. The angle seat design offers a high flow rate.Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections

Pneumatically operated angle seat valve is the extremely reliable allrounder in valve technology and is predestined for very high switching capacities. In stainless steel design for neutral and aggressive media but also for a wide range of temperature applications suitable. The angled seat design offers a high flow rate. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Limit switch Pilot valve Manual override . . . Stainless steel Bronze Brass Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Version with approval according to DIN 161 Degreased version, Silicon or PTFEfree version …

Screw for construction with special thread; to length 280mm

Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Our rod ends are available in various versions: steel, stainless steel, maintenance free, maintenance required, female thread, male thread, left-hand thread, right-hand thread, fine thread, tempered, heat-treated, special versions, customized versions

Our rod ends are available in various versions: steel, stainless steel, maintenance free, maintenance required, female thread, male thread, left-hand thread, right-hand thread, fine thread, tempered, heat-treated, special versions, customized versions

(ePTFE) Characteristics High density and strength properties HD Tape plies during the wrapping in the thread and forms a dense PTFE film, which does not harden and stays flexible Immediate after connection of the construction parts it is possible to turn them 45° back for alignment. Chemically inert and does not react with steam, water, fuel, acids, gases or solvents. Once applied the connection can be disassembled Fretting of the threads is practically impossible Technical parameters Temperature: t = -240 … +260 °C Pressure: p = Vacuum up to +170 bar pH 0 - 14 Physical properties Color: bright yellow Thickness: 0.1 mm Area weight: 125 g/m Classification: GRp Tension strength: 9 - 14 MPa Nominal width: 10 < DN < 50 Main application For sealing all kind of thread connections as per ISO 7-1, classification GRp, with possibility of limited reverse rotation of conical/cylindrical (R/Rp) threaded connections Pipe connections in...

We accept responsibility for the whole process of production. On the one hand, we set outsourced items or provided parts like Press-in bolts Clinch studs Ball studs Weld screws Weld nuts into complex assembly groups. On the other hand, we offer downstream services like Thread cutting Slide grinding Defatting Special packing operations (in trays / blister packaging, wound on spool, packed in layers) Your needs and wishes always have priority and always will have. For that purpose we cooperate with reliable suppliers, who take charge of downstream surface treatment like: Galvanising Chrome-plating KTL-coating Silver-plating Hardening Press tempering Powder coating On your wish we guarantee particle purity and silicone-free packing.

These special sewing threads made from 100 % polytrimethylene terephthalate are characterised by extraordinary elasticity. The seams are pucker-free and smooth which makes them ideally suited for closing and decorative seams, especially on lockstitch machines. Suitable for highly-elastic fine woven and knitted textiles in men’s and ladies’ wear as well as lingerie and sportswear / It can be sewn very well / Double chain stitch seams can be replaced by double lockstitch seams without compromising on elasticity / Thanks to lower tension settings, the ideal seam elasticity can be achieved already with 4 stiches/cm / Ideal for visible, elastic decorative seams.

Outdoor textiles are expected to last for many years. Gütermann offers a special thread made of polytetrafluorethylene (PTFE). This product has very good temperature-, ultra-violet light and chemical resistance and its shows high breaking strength and abrasive resistance. Sun, rain, wind and weather are particularly hard on outdoor textiles. Seams are placed under the most severe strain, and quickly lose their resilience and firmness under the influence ofUV radiation and extreme weather conditions. Functional capabilities of standard sewing threads lessen if permanently exposed to outdoor conditions by up to 50 percent in the firstyear; but Gütermann PTFE 30 shows its strength. 100% PTFE / best temperature, ultra-violet light and chemical resistance / insensible against acid rain / High breaking strength and abrasive resistance

Thread turning is a special turning process.In thread turning a distinction is made between three different forms of presentation; the use of these depends on the thread pitch, the machine tool, the work-piece material and the cutting edge geometry. In the case of large threads, the tool must traverse the same track several times, penetrating deeper each time. The full depth of cut is therefore divided into several smaller cuts, thus preventing an overload on the sensitive tip of the thread profile of the cutting edge. In order to ensure profile accuracy, the helix angle of the thread must coincide as far as possible with the angle of inclination of the threaded plate. Thread turning method