Steel pickling - Import export

ABES Bench 103 is a park bench steel tubes made of bent and adjusted to miter with two diagonally opposite back rests. The steel frame is designed to accommodate seating supports and back rests made of wood. Mounting Screw-on or free standing. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats made from hardwood. – The following changes are possible for an extra price: colour and wooden surface. ABES Bench 103 overview: Park bench with back rest – Feet: Stainless steel 1.4301 pickled and smoothed or Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats: Hardwood. – Measurements (L x H x W in mm): 2380 x 730 x 835. – Delivered unassembled.

ABES Bench 107-2 is a park bench with back rest, consisting of two U-shaped steel tube frames including mounting options for a seating slat made from several steel tube profiles. Back rest connected to the rear tube of the seating slat on sickle-shaped suspensions. Mounting Screw-on. Finish – Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. ABES Bench 107-2 overview: Park bench with back rest – Base: Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 or Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge – Measurments (L x H x D in mm): 1585 x 840 x 522. – Bench is delivered unassembled.

ABES Bench 100 is a park bench with back rest made from 140 mm wide steel profiles to hold the wooden slats. The profiles are bent and closed at the footing. The wooden slats align with the frames. Mounting Screw-on or free standing. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats made from hardwood. – The following changes are possible for an extra price: colour and wooden surface. ABES Bench 100 Overview: Park bench with back rest, – Feet: Stainless steel 1.4301 pickled and smoothed or Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats: Hardwood. – Measurements (L x H x W in mm): 1700 x 740 x 760. – Delivered unassembled.

ABES Bollard 074 is a square steel bollard with slightly pyramidal square top. Mounting Removable with 3p-Technology. Alternative: concrete embedment. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703 – Stainless steel 1.4301, pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge The basic package for ABES Bollard 074 with 3p-Technology contains: – The bollard, steel ST37/stainless steel, powder-coated/pickled and smoothed – Measurements (H above the ground x Ø in mm): 1000 x 120/120 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004) – Ground rosette (Completely covers the ground shell)

ABES Bicycle-Stand 453 is a U-rack made from perpendicular steel profiles. Other profile dimensions, heights and widths are available upon request at a surcharge. An assembly model is available. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. ABES Bicycle-Stand 453 overview: – Rectangular tube 50 x 20 mm – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm

ABES Bollard-Ashtray 525 is fully cylindrical bollard ashtray with a sloping slot area. Labelling in the form of an outlined, laser-printed cigarette symbol. Mounting Removable with 3p-Technology. Alternative: concrete embedment or screw-on. Finish – Powder coating in standard RAL colours or DB 703. – May be unlocked for emptying using a triangular key. – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. Delivery for ABES Bollard-Ashtray 525 – Made of stainless steel 1.4301. pickled and smoothed or steel ST37, powder coated in RAL or DB 703 Glimmer grey. – Measurements (H above the ground x Ø in mm): 1000 x 108 – included triangular lock and key The basic 3p-Technology package contains: – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004)

ABES Tree-Guard 662 is a bent, U-shaped steel frame with a diameter of 48,3 x 2,6 mm. Three foundations are required. Optional: a ground shell for the removable model. Mounting Concrete embedment or inserted into a standard ground shell (not 3p-Technology). Finish – Stainless steel 1.4301 pickled and smoothed Electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. ABES Tree-Guard 662 overview: – Material:Hot-dip galvanised steel ST37 or Stainless steel 1.4301 pickled or powder coating in standard RAL colours or DB 703. – Tube diameter: 48,3 x 2,6 mm – Measurements (B x L in mm): 1200 x 1200 – Standard Height above Ground 450 mm – Ground insert: approx. 350 mm – other heights above ground: on demand

ABES Bollard 056 is a fully cylindrical bollard made from galvanised steel/stainless steel, including a circumferential groove and a slightly domed top. Mounting Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Stainless steel 1.4301, pickled. Smoothed or electropolished finish to customer’s requirement (high-gloss) – surcharge. – Powder coating in standard RAL colours or DB 703. The basic package for ABES Bollard 056 with 3P-Technology contains: – The bollard, ST37 steel / stainless steel 1.4301, powder coated in RAL or DB 703 Glimmer grey – Measurements (H above the ground x Ø in mm): 1000 x 108 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004)

ABES Bicycle-Stand 473 are two, three or four adjacent 453 bike rails made from perpendicular steel profiles (50 × 20 mm), welded onto two flattened steel bars. Other profile dimensions, heights and widths are available upon request at a surcharge. Mounting Screw-on Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Also available with LED strip on the underside of the cross tube or with knee rail ABES Bicycle-Stand 473 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Rectangular profile 50 × 20 mm mitre-cut, welded onto two flattened steel bars – Height above ground: 860 mm – Width (rail): 820 mm – Length: 750 (2) / 1.450 (3) / 2.100 (4) mm

ABES Bicycle-Stand 451 is a frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, parallel tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish · Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. · Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. · Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. ABES Bicycle-Stand 451 overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 855 x 340 x 290 – Optional: convex cover plate with a 300 mm diameter

ABES Lighting-Bollard 200 (LED) is a cylindrical and removable stainless-steel bollard. With satined or clear acryl glass. Reflective slats surround the light unit. With standard lighting or LED technology. Mounting Removable with 3p-Technology, comprising a 300 mm ground shell, junction piece with pre-determined breaking point, anti-roll device and cable slot, 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard. Alternative: Fixed Mounting (screw on). Finish – Stainless steel 1.4301 pickled and smoothed. – Powder coating in standard RAL colours or DB 703. – Available with satined or clear acryl glass and 8 reflective slats. – Lower fitting: hexagon shell safety screws with pin, incl. key. – Protection class 1, protection type IP 54. Lighting units – Osram Dulux TC-DEL, 13 Watt, 230 Volt AC, 900 lm, 830 K – LED stick with 3 x 3 LEDs, 9 Watt, 230 Volt AC, 1000 lm, 3000 K

ABES Bicycle-Stand 472 is a bike rail with knee rail and rounded edges made from 80 x 10 mm bent flat steel. Additional material thicknesses, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge ABES Bicycle-Stand 472 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 80 x 10 mm – Height above ground: 850 mm – Full height: 1100 mm – Width: 800 mm

ABES Bicycle-Stand 450-2 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm – Measurments: (H above ground x L x B in mm): 845 x 1240 x 244 – Optional: convex cover plate with a 300 mm diameter

U-rack made from perpendicular steel profiles with an integrated LED bar unterneath the crossbar. Other dimensions are available upon request. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. Overview: Bicycle Stand, stainless steel, galvanised steel or powder coated – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm – LED-bar (approx. 24,5 x 770 mm) – Power supply: 24 V DC – Power input: approx. 6,7 W – Luminous flux: approx. 560 lm – Reflected beam angle: 120° – Light colour: 4000 K – Light transmission: CRI >80 – Protection type: IP 67 – Connection cable: approx. 1 m with IP 67 plug The Connection, including all technical requirements, is delivered by the client and is not included in this package.

ABES Waste-Container 529 (75 liters) / 530 (50 liters) is a cylindrical steel waste container with O-shaped, horizontal slot area and separate cigarette slot. The container comes with an assembled bollard. Mounting Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Stainless steel 1.4301 (529 only), pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Other colours available on request at a surcharge. – Cigarette slot: Stainless steel 1.4301. – Incl. internal container. – May be unlocked for emptying using a triangular key.

ABES Waste-Container 527 (75 liters) / 531 (50 liters) is a cylindrical steel waste container with O-shaped, sloping slot area and separate cigarette slot. The container comes with an assembled bollard. Mounting Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703 – Stainless steel 1.4301 (527 only), pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge – Other colours available on request at a surcharge – Cigarette slot: Stainless steel 1.4301 – Incl. internal container – May be unlocked for emptying using a triangular key

ABES Bicycle-Stand 470 is a bike rail made from a bent steel tube with a tube diameter of 48 mm. A knee rail, as well as other tube dimensions, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Optionally with knee rail ABES Bicycle-Stand 470 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Bent steel tube with a tube diameter of 48 mm – Height above ground: 860 mm – Full height: 1.160 mm – Width: 860 mm

ABES Bicycle-Stand 471 is a bike rail with rounded edges made from 60 x 12 mm flat steel. A knee rail, as well as other tube dimensions, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Option: removable with ground shells Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Optionally with knee rail ABES Bicycle-Stand 471 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 60 x 12 mm – Height above ground: 800 mm – Full height: 1150 mm – Width: 800 mm

ABES Bollard 089 is a fully cylindrical bollard made from galvanised steel/stainless steel, with a slightly curved top end. Mounting Removable with 3p-Technology. Alternative: concrete embedment. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703 – Stainless steel 1.4301, pickeled and glass-bead blasted. Optional: electropolished/high-gloss (no surcharge – The height can be adjusted individually The basic package for ABES Bollard 089 with 3p-Technology contains: – The bollard, steel ST37/stainless steel, powder-coated/pickled and glass-bead blasted – Measurements (H above the ground x Ø in mm): 750 x 89 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004)

ABES Bicycle-Stand 450-1 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 845 x 683 x 244. – Optional: convex cover plate with a 300 mm diameter.