Steels and metals - machining - Import export

Turning to dia. 250mm / 350mm / 400mm Milling small size max. 450x550x600 mm large size max. 1000x3000x10000 mm Horizontal Boring Machine small size max. 1600 / 1200 mm large size max. 2500 / 1800 mm Carousel – max. dia. 2250/2500mm, height 1500mm Straight Grinding max. 3000×400 mm Round Grinding max. dia. 320 ×1000 mm

We do it all without blinking, but in protective glasses.

Mercury steels are a set of steels that are hardened with water suitable for the construction of tools such as twist and dental drills, Guides, Drift punches, Countersinks , Center drills, Rasps, Hole punches, Metal saws, Drawing punches and all sorts of staples, connecting tab and similar tools.

Surface treatment is called surface treatment to prepare the surface for the final results of the metals with the help of chemicals determined according to the second treatment

ENJECTİON:In a closed mold, after the plastic material is injected into the mold cavity at a high speed from the runner inlet at a temperature range above the melt temperature, after bringing the size and visual tolerances of the part to an acceptable level with the ironing phase and holding

Machining is a manufacturing method that covers the shaping of the pre-designed and constructed machine element, the manufacturing process of which is determined, by subjecting it to

Laser cutting is a cutting method in which metal and non-metal materials with different material thicknesses are cut. The basis of the process is the directed, shaped and focused laser beam. By hitting the laser beam on the workpiece, the material is heated up to its melting or evaporation temperature

Forging is the process of plastic shaping the part, usually hot, semi-hot or cold, under th influence of only compressive forces. Many parts are shaped by forging when high strength is required. With forging, high strength and toughness are obtained. A controlled grain flow is achieved.

ECU 99,9 % : Electrolytic is used as copper material with a conductivity of 58, electrode in erosion, high-low current panel and busbar in substations. Among our standard products: Rod, Sheet Plate, Straight pipe, Tube Coil, Box profile, Grounding rod - plate, Roofing, Copper fittings and thin wires. Also, sheet plate measurements which do not have a standard are brought to necessary measurement by forging at desired dimensions.

AISI630 quality stainless steel is a type of steel that is rapidly used in the world since it has high mechanical strength, high hardness and good price-performance ratio. AISI 630 quality stainless is commonly used in pump and valve shafts, kitchen utensils, petrochemical industry, chemical plants and places with stainless steel decoration materials. Defense industry is one of the most widely area of use of 1.4542, that`s also named as PH 17-4, stainless quality. This stainless steel material, which is preferred in the defense industry in our country, is frequently used due its high level of mechanical values and long life

420 quality stainless steel can be hardened by many heat treatments like high carbon steel. It contains at least 12% chromium (Cr) and this alloy is sufficient for corrosion resistance. It has good softness in annealed condition, but it has the ability to get 50 Rockwell hardness by heat treatment. For best corrosion resistance it must be hardened and gets it surface cleaned or polished.

316 quality is the best known stainless steel after 304, the biggest difference is containing molybdenum (Mo). Molybdenum (Mo) 316 is better resistant to corrosion in corrosive environments than 304, it is especially good against cracks and pits in the surface and interior structure. Its shaping and welding capability is high. It can be used for various purposes in sectors such as industry, architecture, transportation. It does not require post-welding annealing for thin sections. 316L is the low carbon version of 316. Therefore, it does not require post-welding annealing for thick sections of 316L. 316Ti contains a small amount of titanium (Ti), the ratio is around 0.5%. The greatest advantage of this quality in the other two qualities is that it has a longer strength at high temperatures.

310 quality is designed to withstand high temperature service. Despite this feature, material softness and weldability are quite good. It can operate continuously at 1150 degrees and does not rust. It can operate intermittently at 1040 degrees. Like other austenitic grades, it has excellent toughness. The 310S quality is resistant to high temperatures both in moist and dry environments. The low carbon content of the 310S allows it to withstand temperatures less than 310 does.

304 quality is the most commonly, and in a versatile way, used stainless steel in the world. It has ability to be perfectly shaped and welding capability. Austenitic structure of 304 provides to perform deep drawing without intermediate annealing, and therefore, it is preferred in manufacturing which requires deep drawing such as sink, natural gas chimneys and saucepan. It can be used for various purposes in sectors such as industry, architecture, transportation.

It is the quality with the best malleability feature among the austenitics. Its malleability capability is around 78% and it is named as the automat of stainless steel. Although the sulfur (S) addition improves its malleability, it also reduces corrosion resistance (lower than 304) and weakens its formability, it is especially not suitable for straight bending. Despite sulfur, its toughness degree is the same as 304

It is a material with high stretching resistant to sea water and corrosion. Under heavy load and at bearings and bushings with low speed, at gears which operates in pumps and turbine wheels and requiring high strength.

BRONZE (RED) PRODUCTS Specific Weight: 8-9 Bronze bushings are manufactured with centrifuging and sand casting method. They are used in bearing, bush and gear production. They increase life-span of the machinery. They minimize the malfunctioning and maintenance.

Characteristic Features : high corrosion durability, high welding capability; especially high durability against industrial atmosphere and sea water. Suitable for cold shaping, high fatigue strength, suitable for coating. Warnings : During cold shaping, stabilized form should be preferred, if remains unprotected above 65 degree, gets exposed to corrosion, if non-appropriate heat treating is applied, stress and corrosion among particles occur.

Characteristic Features : High welding capability, very high durability against sea water corrosion, high fatigue strength, high cold formability in soft temper form, extrusion of thin and complicated parts are difficult. Warnings : In case of non-appropriate welding, breaking may occur. Product Shapes: plate, bar, roll, wire, pipe, profile types.

Characteristic Features : Light treating can be applied, suitable for machinery manufacturing, high malleability, high fatigue strength, increasing corrosion feature with coating.

Characteristic Features : Very durable against atmospheric corrosion, nice formability, high electricity and heat conductivity, nice appearance, suitable for decorative coatings, high welding capability, low mechanic features

PHYSICAL FEATURESOF ALUMINM Melting temperature : 650 - 600 C Coefficient of linear expansion: Between 20-100 C,24 X 10 C Resistivity : 20 C 0, 0282 Ohm mm./m.

BRASS (YELLOW) Bar Sheet Plate Pipe and Profile Wire Coil Plate / Strip BRASS (YELLOW) PRODUCTS ( Specific Weight: 8,5) MS 58 : Manufactured as Bar, Sheet Plate, Hexagon, Angle Ring, Thin wire coil. MS 63 : Manufactured as Pipe and Profile. MS 70 : Manufactured as plate and strip

WELDING FEATURES With a simple fusion, two parts can be combined. Large and heavy parts such as blocks and pipes can be welded using eutectic and tin-lead solder or melting alloys with low fusion points.

Casting is a process in metalworking and jewelry making in which a liquid metal is poured into a mold that contains a negative impression of its intended shape. The metal is poured into the mold through a hollow channel called a casting hole. The metal and mold are then cooled and the metal part is removed.

The joining process on metal or plexi surfaces is expressed as welding construction. Combining different materials by using pressure or heat or using more than one material or giving the impression of being a single piece creates the waist collections of parts and

Gear Box

CASTİNG:Investment casting is the process of removing the wax material from the mold after being covered with ceramic and pouring the molten metal into the mold. With this method, small and difficult to cast parts are produced. The production of many metals such as steel alloys, aluminum, stainless steel can be done by precision casting.

It is the general name of the placement aimed at improving the mechanical properties of heat treatment metals. A type of metallurgical process. Generally, it is done by annealing metals in a certain way, bringing their structure to the desired stage.