Electrical components and parts - Import export

Solar fuse holder 1500VDC NSPV2258H Max.100A conform to IEC60269/IEC60947 standards

This series of fuses is suitable for solar photovoltaic power generation system, rated voltage up to 1500V, rated current up to80A, rated breaking capacity is 10KA, productsare in conform with IEC60269.6 standard.

EAE Seismic Support Systems offer rigid solutions for installations that require earthquake protection. The seismic supports, which can be utilized in any type of installation, allows for quick and easy installation due to the accessories that are designed for steel beam and space roof connections.

Industrial Rectangular Profile SystemE-Line RSP Rectangular Profile System is a specially designed solution to meet your industrial connection needs. With the unique advantages of the tapered threaded bolts used in this system, it offers significant gains in terms of labor, cost, and performance.

URC (Uni-Rail Conductor) Trolley Busbar are designed where each conductor is assembled as a separate unit and the current collector cars perform uninterrupted electricity transfer to the machine.E-Line URC Trolley Busbar can be used indoors and outdoors, in harsh conditions due to the fact that the conductors are in separate housings. Suspended and reeled cables are eliminated.

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

The electricity is conveyed from the conductors via the brushes in the trolleys, which travel with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

Underfloor Busbar Trunking Power Distribution Systems (63A-80A)Dabline underfloor busbar systems, which has various colour options, is used in raised floor applications in offices. The smaller size of DABLINE (Underfloor busbar) makes it possible to install the system into restricted areas with a floor height up to 65mm.

Lighting Busbar Systems (25A,32A & 40A)E-Line DL/SL group Busbar Trunking Systems are used in lighting circuits that require single phase or three phase electrical current in buildings and industrial facilities. 10A / 16A output plugs (with and without cartridge fuses) are designed to supply lighting circuits according to their characteristics.

Equipped and/or empty socket combination and fuse (distribution) box solutions for factories, construction sites, workshops and working environments...Industrial sockets with CEE standard and fully equipped ready to use products are currently considered important for technical working environments such as factories, workshops and construction sites.Therefore it can be equipped with "socket combination boxes" and "fuse distribution boxes" as well as modular alternatives that can meet rapidly changing and continuously increasing requirements, plus flexible, sound, ergonomic, safe and aesthetic design options are rendered according to the requirements and preferences for living and working environments.

Power and data requirements which increase rapidly in all types of factories, worksites and living areas are revealed in new building designs. Consequently, flexible, modular and modern infrastructure systems that can be adapted to the rapidly changing requirements in new buildings designs are gaining momentum.

Elegant and practical solutions for business centres, offices, living and working areas..Ready to use products which are fully equipped with power (supply network/ups), data, telephone and multimedia sockets are currently considered important for work spaces, meeting and presentation rooms.Non equipped or fully equipped versions are available with multi extension outlet plugs with a modular structure which can be easily modified to meet changing needs. Accordingly, EAE offers flexible, sound, modular, aesthetic and safe solutions which will also meet your future requirements.

Ladder Cable Tray - Foldable Cable Ladder SystemE-Line KM pre-galvanized foldable cable ladders are manufactured with a directional folding system. Due to this feature, they take up less space than the E-Line KC series cable ladders therefore reduces shipment and storage costs.

Lighting Busbar Trunking (25A) E-Line KY-S Lighting Busbar Trunking Systems has been designed for buildings and industrial facilitieswhich have lighting and outlet circuits with diminutive electrical machinery and equipment that needs three phase and/or single phase energy requirements with 25A.KY-S Lighting Busbar with its 10A – 16 A tap-off plugs and 32A tap-off boxes are being manufactured by fully automated machines that uses the latest technology in accordance with ISO 9001 and with its quality assurance system certification. Products have been designed in accordance with IEC 61439-6 and tested. Busbar housing are manufactured as pre-galvanized sheets, additionally if requested, it could be manufactured applying RAL 7038 colour.

Indoor Busbar Trunking Systems (32A - 250V)E-LINE FLD Indoor Busbar Trunking Systems provides for offices aesthetic, safe, practical and flexible solutions eliminating cable mess. E-Line FL/FLD can be installed on skirting or at the table level for the need of Main or UPS power, or for the need of structural cabling.

Busbar System - FlexibilityThe small power range Busbar Systems of E-Line MK series provide flexible and cost-effective solutions for the transmission and distribution of electricity in small-sized enterprises , workshops and industrial facilities.The MK Busbar range offers cost effective solutions to the requirement for different amounts of energy through the range of plastic tap-off boxes. They are designed to provide energy up to 225A.

IP68 Aluminium Housing Cast Resin Busbar (600A...6300A)Aluminium housing covers the “DUROCOMP” composite material that is manufactured from specially selected pure silicium minerals and epoxy resin and has superior temperature and mechanical operation features and insulates the E-Line CCR Busbar from external elements.

Seifert heat sinks are designed for both natural and forced cooling applications. From standard heat sinks to individually machined custom profiles, we offer the appropriate heat sink in the desired profile. The standard heat sinks from Seifert electronic GmbH are classic finned heat sinks, primarily intended for natural cooling. However, these heat sinks can also be utilized for forced cooling with airflow. Thanks to the extensive variety of profiles in our standard range, we can fulfill almost any heat sink requirement. From small transistor coolers to profile giants for IGBT cooling, measuring up to 900 mm in width, we provide the right profile for nearly every application. In addition to our standard profiles, we have access to open profiles, offering the possibility of further variations without incurring tooling costs.

Maximum heat dissipation using PC board heat sinks in minimal board space. Seifert electronic GmbH offers custom heat sinks for use in the board area – precisely measured and flexibly adapted to your requirements. The wide standard range of Seifert electronic includes PC heat sinks in all common designs. We provide various heat sink models such as snap-on heat sinks made of strip material, extruded heat sinks, die-cast heat sinks, as well as finger heat sinks and U-shaped heat sinks, along with the corresponding accessories like mounting clips for fastening. Extruded profile heat sinks are considered classics among PC board heat sinks. We gladly recommend them for use in the board area as they are versatile and can dissipate relatively large amounts of heat.

For forced cooling, Seifert electronic offers compact fan units in various performance classes. The variable fin spacing in the high-performance heat sinks ensures strong cooling during fan operation. In forced convection cooling, fans are required as separate sources of convection. To ensure optimal convection during fan operation, it is recommended to incorporate heat sink profiles. The fin spacing in heat sink profiles is particularly important, as increasing the surface area is key for forced cooling. To push this boundary further, we have continuously reduced the fin spacing in our profiles. Depending on the model, up to three fans per cooler are possible, which can optionally be equipped with pressure chambers for improved air guidance. Most heat sinks are already equipped with aerodynamically designed hollow fins. Additionally, air deflectors for air guidance are available for some heat sink profiles.

Our thermal management and insulation products are far from being just interim solutions. The Thermal Interface Materials (TIM) from Seifert electronic GmbH ensure optimal thermal connection between heat sinks and the components to be cooled. As electronic assemblies become increasingly compact, even a tiny gap between individual components can disrupt the necessary heat dissipation. Air pockets between the heat sink and the component being cooled hinder the optimal thermal connection. Possible consequences include temperature overload, which can lead to overheating in the worst-case scenario. Thermal management and insulation products act as connectors between the heat sink and the electronic component being cooled. They fill every tiny gap between the heat sink and semiconductor with thermally conductive material. This ensures optimal thermal connection and prevents any heat buildup.

For applications involving very high currents and voltages, Seifert electronic provides heat sinks and mounting brackets designed to apply the appropriate pressure for optimal disc cell cooling. Presspack cells are employed in circuits where very high currents and voltages are present. In such scenarios, disc cell cooling is crucial for ensuring good electrical and thermal transfer. Achieving this goal primarily hinges on the connection between individual presspack cells and the heat sinks in disc cell cooling. This connection must be established with the clamping force specified by the manufacturer. With Seifert heat sinks and the accompanying mounting brackets, also known as clamping brackets, we offer professional equipment for maintaining the correct pressure in disc cell cooling applications. This ensures a high level of durability and robustness, contributing to an extended lifespan of the setup.

wireway fastener material: brass round cap, groove width 0.062±0.010 inch, depth 0.093±0.010 inch externally threaded, NPSM 1/8 inch, 0.38±0.03 inch diameter: 0.593±0.010 inch, 0.318±0.010 inch through hole diameter 0.218±0.010 inch, for wireway length: 1.31±0.03 inch chamfer 45°±30′ Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Available with two styles of formed lead configurations, 2mm x 6mm SMD crystals have excellent shock resistance. They are low-cost components and an efficient solution for general real time clock applications. Low-cost and low mass SMD crystal, 32.768kHz Real-time clock oscillators

aluKOM is a watertight enclosure made from die-cast aluminium, which has gone on to become the global standard since its invention by Friedhelm Rose in the 1970s. Originally developed as a terminal enclosure, it is ideal for the attachment of all electronic and electrical components. The large number of sizes available caters to all requirements. aluKOM is also available with an EMC gasket. The internal fastening domes in the bottom enable internal mountings to be fastened easily. Compatible cable glands are also availabe in the ROLEC product range.

conFORM is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a patented tooth system contour between the lid and bottom. It is ideal for industrial internal mounting that requires special EMC protection. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Accessories such as mounting plates and cable glands are included in the ROLEC product range.

conTROL is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a tooth system contour between the lid and bottom. It is ideal for every type of industrial internal mounting that requires special EMC protection. A lid with an extra-high collar edge and visually appealing bevelling is also available to protect buttons or switches on the front of the enclosure. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Compatible cable glands are also availabe in the ROLEC product range.

aluCASE is a modern aluminium enclosure for industrial electronics. It consists of high-quality die-cast aluminium and is very versatile. Whether in the line of sight on a wall or for mechanical engineering. The enclosure is equipped with a recess to accommodate membrane keypads or front plates as standard. Two models are available with a transparent lid, most dimensions can be supplied with integrated lid support. Fastening threads for internal mounting are integrated into the bottom and lid of the enclosure. For additional aesthetic appeal, the screw channels can be supplied with plastic or aluminium covers. Access safeguard with an insert lock is also an option. The enclosure can be attached without having to be opened, meaning your electronics remain protected. Cable glands and other accessories are also available.

aluCLIC is a highly modern electronic enclosure, designed for quick installation and rapid exchange. The snap lock located under the enclosure can be easily levered open and the enclosure changed in an instant. The lid already has a recess to accommodate membrane keypads or a front plates. The snap-on device for attaching the enclosure can be fastened to the wall, ceiling or the body of the machine. Practical, fast and neat to install.