Mechanical seals - Import export

Eccentric screw pump tube B70V HD-D Industrywith circulation/flushing connection for three-phase motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2

Eccentric screw pump tube B70V HD-SR Industrywith circulation/flushing connection for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V HD-SR Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. * Version with circulation/flushing connection with internal thread 3/8". * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use * Approved according to ATEX Directive 2014/34/EU, Category 1/2

Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use

Eccentric screw pump tube B70V-D Industryfor three-phase motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with Mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The B70V-D 12.1 Eccentric screw pump in the industrial version is a powerful positive displacement pump for medium, highly viscous and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials. * Uniform volume flow * Gentle, low-pulsation product conveying * Smooth running and low wear * Large selection of robust and powerful drive motors * Approved according to ATEX Directive 2014/34/EU, Category 1/2

Eccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure) The HD-E Eccentric screw pump in the industrial version transfers the advantages of the Drum pump low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources. * also available in special immersion depths * Pump tube equipped with Lutz original hand wheel * Media examples: Oils, waste oils, disposal liquids, paints. * Smooth running * Uniform volume flow * Gentle, low-pulsation product conveying * Low wear * Easily detachable outer tube

Our products include Villina-GNGC-2T type centrifugal horizontal pumps with tandem mechanical seals type according to your parameters. These are used for transit in stationary conditions of neutral, corrosive, toxic, as well as explosive and fire hazardous liquids, the vapors of which can form explosive mixtures with air. The units are mainly used by petrochemical industry companies. Parameters of operating fluids (liquids): temperature from -50oС to +400oС viscosity up to 160 cSt density 2,000 kg/m3 max, with a high concentration of particles particle size over 0.2 mm, but not exceeding free passage of the impeller (3 to 12 mm depending on the pump rate) For such conditions, mechanical seals (operating temperature up to 425°C) of well-known companies are used, such as: OOO NPC ANOD, JSC TREM ENGINEERING, UNICHIMTEK Group of Companies and others DESIGN FEATURES The unit consists of a pump, a base plate, an electric motor, a casing and a support system.

Villina-VS1-M type pumps are designed for use in oil and gas and chemical industries for transit of explosive and highly flammable liquids as well as corrosive media and natural gas liquids. A distinctive feature of these pumps is the ability to transit contaminated liquids with particle size of 3 to 12 mm (depending on the pump rate). MAIN SPECIFICATIONS - Pump rate ranges: 2 to 108 m3/h; - Head: 11 to 178.5 m; - Temperature of the pumped fluid: -50°С to +440°С.

Villina-GNVCP-2T type vertical electric semi-submersible pumping units are designed for transit in stationary conditions of neutral, corrosive, toxic, as well as explosive and fire hazardous liquids, the vapors of which can form explosive mixtures with air. These are used in gas, petrochemical, petroleum refining and other industries. The vertical semi-submersible pump – the pump part is fully or partially in the pumped liquid. The unit consists of a pump part, drive sections, a base plate, a device that transmits torque from the drive, an electric motor (drive). The ground part comprises a console fastened to the base plate, an electric motor mounted and fastened to the console, and a mechanical seal support system fastened to a base plate. The semi-submersible part comprises drive sections fastened to the base plate, an elastic coupling body connected to the lower drive section, a pump connected to the elastic coupling body and a discharge line.

Villina-VS1-М, Villina-GNVC-K and Villina-GNGC-K type centrifugal canned pump units with combined seals are widely used in modern gas industries, petrochemical and petroleum refining industries. They are designed for transiting neutral, corrosive, toxic, as well as explosive and flammable liquids in stationary conditions, the vapors of which can form explosive mixtures with air. For such conditions, mechanical seals with operating temperatures up to 425°C of well-known companies are used, such as: OOO NPC ANOD, JSC TREM ENGINEERING, UNICHIMTEK Group of Companies and others, as well as permanent magnets (SmCo) with operating temperatures up to 450°C. Villina type units are made in three versions as regards the spatial location of the pump rotor: vertical ground-level (Villina-VS1-M) - the pumped liquid is supplied to the pump part of the unit through a suction pipe located radially to the pump rotor. The unit consists of a pump part, a device

Centrifugal pumps have well-known advantages such as uniform pumping without surges, the ability to create high pressures at low pump rate in multi-stage designs, long service life and others. Advantages: the fluid can be taken in at a point lower than the axis of the inlet suction pipe without using a pre-installed vacuum pump. - Purpose: transit of corrosive, toxic, explosive and flammable fluids at insufficient suction pressure; - Pump rate ranges: 0.8 to 450 m3/h; - Head ranges: 3 to 132 m; - Self-priming height (depth): up to 6 metres; - Seal type: magnetic coupling according to API 685 or tandem mechanical seal according to API 682; - Climatic version: for moderate and for moderate and cold climate; - Temperature of the pumped fluid: for GNGC-S, GNGC-S-M up to plus 350°С, for NCG-S up to plus 450°С; - Shaft speed: 1,450 or 2,900 rpm; - Structural design: ОН-2 single-stage back pull-out pump according to API 610 or a single block.

Magnetic couplings are used as transmission mechanisms in modern pumps, which makes it possible to obtain a qualitatively new 100% tight device without making essential changes to the design of the electric drive and the wet end of the pump. At present Villina offers GNVC, GNGC and GNVC-P series vertical, horizontal and semi-submersible centrifugal pumps with magnetic couplings, designed for pumping explosive and flammable, toxic and corrosive fluids (petroleum products, alkalis, acids, alcohols, etc). PURPOSE Magnetic couplings for Villina centrifugal pumps allow for transmission of torque from the electric motor to the pump shaft using magnetic fields generated by permanent magnets instead of mechanical engagement devices. At the same time, there is no need to withdraw the shaft from the pump wet end to the drive device, therefore the wet end can be made in the form of a completely sealed system free of leaks which are typical for pumps with mechanical shaft seals.

The U-Do Pump Series is a universally applicable all-rounder. The design and manufacturing materials allow for optimized adaptability for the many different operating conditions as well as for the various media to be pumped. Materials: PVDF (polyvinylidene fluoride) max. output rate: 500 l/min max. discharge head: 40 m motor power: 0.18 - 5.5 kW Advantages: » available with single- or double mechanical seal » applicable also for media to be pumped that do not have any lubricating properties (e.g. varnishes and paints) » the highest chemical resistance » robust, thick-walled design » long-lasting and wear resistant, various types of designs for almost all operating conditions » open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) » easy to maintain (wear parts and the mechanical seal can be changed swiftly) » universally applicable, quiet and compact » various chemical resistant materials can be supplied as stock items