Building - Import export

Building wires with copper cores, PVC insulation/ polymer halogen free composition, inner PVC/ polymer halogen free composition covering, sheath.Application: building wires are used for the installation of power equipment, mechanisms and machinery, power lines of the domestic uses. PVC -insulated/ halogen free/ fire resistant/ flame retardant/ cold resistant/ low smoke/ low smoke and toxic fumes/ shielded

To dispose of waste is more and more a cost factor. Every industrial company produces a lot of general and municipal waste. With a license and an incinerator, you have a way to handle your waste problem. Be sure, incinerate municipal rubbish is an ecological, cost-effective and easy solution. In which industrial companies it is very popular Construction companies Building Chemical companies Food industry Oil and gas industry Production of raw materials Plastic industry Every kind of wood industries CBD industry Pharmaceutical industry

Glue-303MS (hereinafter - "the Binder") is a one-component polyurethane binder for elastic elastic permeable coatings based on elastic aggregates (rubber crumb and EPDM-granulate). It does not contain organic solvents. It is cured by air moisture. When cured, it creates an elastic, durable bond with high moisture resistance. Appearance of components Homogeneous transparent colorless or whitish viscous liquid Dynamic viscosity of components at 70°С, Pa s 0.6-0.9 Content of non-volatile substances, % 100 Appearance of the cured coating Rough, elastic, permeable to water and its vapors surface. The degree of roughness depends on the fractional composition of the filler. Tensile strength of the cured coating, N/, within 8-10 (GOST 270-75) Elongation at break, %, not less than 350 (GOST 270-75) Coating curing time (at +20°С and 70% relative humidity) 24 hours – pedestrian loads can be provided; 3 – 5 days.

Nerpa 441B aero boat is a model with a gasoline engine having a capacity of 98 hp. It is designed for 4 people: a driver and 3 passengers. The total load-carrying capacity on water is 350 kg. The sealed housing is made of high-strength aluminum. The bottom is protected by special grade polyethylene sheets. They are firmly bolted. This makes it easy to repair the cover or change it. The deck is designed in such a way that it does not accumulate water. The boat is driven by an aero unit. It consists of an engine, a propeller and a belt. The operation mode is chosen by the customer. It can be a steering wheel or a lever. The control panel contains a tachometer with a service hour meter, a speedometer with a GPS sensor, an engine start button, a power switch, headlight switches, and a sound warning system. Aero boat is able to move on water, ice, snow, swamps, shallow water and land.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

General description Additives are intended for introduction both into ready-made concretes and mortars, and into dry building mixtures to achieve plasticizing and reducing effects, in order to increase strength, fluidity and workability.

Excellent dispersion of inorganic pigments and fillers High efficiency Synergistic effects in combination with polyphosphates Excellent storage stability

Terracol SL 320B is a 50% emulsion of vinyl acetate and VeoVa-10 versatic acid vinyl ester that forms a transparent glossy film with excellent physical and chemical properties. Contains dibutyl glycol acetate to improve film-forming properties. CONTAINER: Eurocube 1000kg, Plastic barrel 40kg Terracol SL 320B, thanks to the effective protective function of VeoVa-10, has excellent resistance to the main adverse atmospheric influences: UV rays, temperature changes, rain and high alkalinity of the main types of building surfaces. Therefore, paints, fillers, primers and other finishing materials based on TERRACOL SL-320 B are favorably distinguished by a longer service life.

Pigment based on the rutile form of titanium dioxide. Provides excellent weather resistance and high gloss levels in paints and coatings, inks and plastics. The pigment is designed for use in the production of paints and varnishes based on various film formers, for industrial and decorative coatings, as well as inks and plastics, and for various other purposes. Main characteristics: Durability Easily wettable and dispersible High retention of gloss Excellent coverage Excellent depth of tone Gives high brightness to white colors Fields of application: Water-dispersion paints with any level of gloss For the manufacture of coatings used in aggressive environments Unplasticized and plasticized PVC Polyolefins Polystyrene and its copolymers Paper industry Plastics

TECHNICAL SPECIFICATIONS Dispersion: Appearance White liquid Content of non-volatile substances, wt. % 50±1 Density, g/cm3 ~1.04 pH 7-9 Minimum Film Formation Temperature (MFFT), ºC ~0 Brookfield viscosity at 23°С, RVT/2/20, mPa×s 300-800 Conditional viscosity according to B3-4, from 15-30 Particle size, mcm 0.1-0.2 Resistance to mechanical agitation (5 min at 14000 rpm) Resistant The content of residual monomers, wt.% <0.1<br /> Film Appearance Transparent, elastic, slightly sticky Film tear strength, N/mm² ~3 Relative film elongation at break, % ~850 Water absorption (after 24 hours at 23°C and film thickness 0.27-0.32 mm), % 10-13 STORAGE The dispersion is recommended to be stored at a temperature of +2 to +35°C. . Warranty period of storage - 6 months Avoid freezing

Appearance: viscous liquid of white or slightly yellowish color, without lumps and foreign inclusions, with a particle size of 1-3 microns. Surface film is allowed. Properties: has high binding properties and high adhesion to various materials. Areas of use: Adhesive for a wide range of materials: paper, cardboard, plywood, wood, cotton materials. It is used to create glue for Metlakh and facade tiles, as well as glue for the furniture industry. Widely used: in the packaging, printing industry, as well as in the production of starching agents in household chemicals. It is used for gluing woven, wood, leather products, as well as an additive for finishing fabrics, in the manufacture of fiberglass canvas and fiberglass fiber. PVAD is used as a film-forming agent for painting and art paints, used in the production of plasters and fillers, for interior and exterior works.

FRONT FACADE is a high-quality facade paint for painting natural and artificial stone, concrete, brick, putty and plastered surfaces when performing facade work. FRONT FACADE can be used to paint plinths (when there are waterproofing, pavement and storm sewers that can minimize long-term static water exposure and capillary effects of moisture rising from the foundation). There is no residual stickiness and low yellowing and dirt retention; Good blocking properties when painting fat-soluble condensates on the surface of the facade. Excellent vapor permeability will ensure rapid transfer of moisture from the base to the environment, which will avoid cracking and destruction of the paintwork in the off-season.

Solvent 0501 PROFI has a soft diluent composition. It does not contain aromatic hydrocarbons. It has a wide range of applications. Dilution of protective and decorative compositions based on natural oils and waxes, as well as dilution of oil, alkyd, bitumen, glyptal, pentaphthalic and phenolic varnishes and enamels (to achieve working viscosity and in case of thickening); Removal of natural oils and oily stains from the working surface and clothes when working with oils; Removing resin stains off the wooden surface; Degreasing various surfaces before painting; Cleaning painting tools for natural oils and waxes application; Dilution of bitumen and silicone rubber mastics; Removal of oil, bitumen and wax smudges; Removal of organic stains off floor coatings (wooden parquet, linoleum, laminate); Removal liquid silicones and silicone oils off various surfaces (household and car polishing compositions).

Solvent 0500 PROFI has a soft diluent composition. It does not contain any aromatic hydrocarbons. It has a wide range of applications. Dilution of protective and decorative compositions based on natural oils and waxes, as well as dilution of oil, alkyd, bitumen, glyptal, pentaphthalic and phenolic varnishes and enamels (to achieve working viscosity and in case of thickening); Removal of natural oils and oily smudges from the working surface and clothes when working with oils; Removing resin stains from the wooden surface; Degreasing various surfaces before painting; Cleaning painting tools for natural oils and waxes application; Dilution of bitumen and silicone rubber mastics; Removal of oil, bitumen and wax smudges; Removing organic stains from floor coatings (wooden parquet, linoleum, laminate); Removing liquid silicones and silicone oils off various surfaces (household and car polishing compositions).

The slabs formwork on the desk helps to speed up the working process. Thanks to universal elements it can be used for different requirements at the construction site. The main components of the system are props. The main technical features of telescopic props: •working ranges height along allow tying-in to projects of any complexity •tower load carrying capacity can vary from 1 up to 3 tons •foundation nut is made of wrought iron recommended by European institutions for use at high shock loads in construction Shuttering telescopic props are designed to support horizontal shuttering liners when casting bridgings and use as temporary supports for fixing the horizontal elements during mounting and dismantling of various structures. Set of different height along supporting telescopic props allows performing in situ concrete works at any heights of up to 5.3 m.

PSK-TOP shoring towers are ideal for mobile work with slab formwork (with a standard tower load of at least 40 kN, i.e. up to 160 kN per tower) or for supporting already finished monolithic structures. System – collapsible, multi-purpose, inventory, steel. •PSK-Top can be used for big heights and high loads: safe load transfer to the ground •Shoring Tower PSK-TOP consists of only 5 elements. In some cases, PSK-Top Stacking Tower can work without diagonals, then only 4 elements are enough. •Easy and simple assembly without bolts or pins – without any tools at all. The stacking frame weighs less than 7 kg which facilitates ergonomic and fast assembly. •Due to accessories preparation will not be carried out and the tower can be installed by a single worker, time and labour force are saved. •After installation towers can be transported by crane. •The system is ideal or use in complex structures, including bridges and stadiums.

Frame modular formwork MSK is light panel formwork, main element has the following dimensions 100 cm x 150 cm. Mounting element height is 7.5 cm. Bearing structure is a rack screen of strip iron with dimensions of separate cells of 25 x 25 cm. 11-layered plywood board 15 mm thick covered with laminated film is inserted into the structure of steel frames. • Foundation formwork • Wall formwork • Lift well formwork • Wall formwork (compound node points) • Column formwork • Bent surface formwork Modular formwork MSK has ideal gradation of all height ranges, from foundation to necessary wall heights. Base element width is 100 cm. Due to great width range of finishing (fitting) elements, for example 75, 60, 50, 45, 40, 35, 30 and 25 cm and presence of compensating element of 5 cm, formwork can be adapted to any monolith project. At construction sites where there is no crane formwork installation can be executed manually due to light weight of elements.

PSK-DELTA system is well suited for both simple and composite structures. So, the use of PSK-DELTA shuttering is always cost-effective. This is realized through the structural features of a panel frame, lock and components. The panel design makes it possible to conduct in concrete works without limiting the speed of concrete casting up to the height of 3 meters. The robot-aided fabrication workshop ensures perfect geometry of shuttering panels. • Wall formwork • Column formwork • Radial wall formwork • Foundation formwork The system uses a universal lock (EUstadard) providing the single connecting part and ensuring coherence, evenness and tightness of connection. An opening for a tension bar has a conical shape, which enables moving the tension bar at an angle of 4° whatsoever right and left and facilitates cleaning from concrete; a taper sleeve is made of steel. The tension bar diameter may be up to 20 mm.

Universal deck form PSK-CUP combines the functions of deck form and scaffolding. The deck form PSK-CUP corresponds to the space frame which forms the rigid frame without joints which does not require additional stabilization by diagonal connections in most cases. It is assembled from the tubular members: vertical and horizontal, lower threaded lifting jacks and upper threaded uniforks, connection elements, it may be completed with fixation elements. Vertical elements are the basic bearing components of the framework on vertical plane. There are six basic dimension. They are joined with the help of connection elements according to the principle “tube-in-tube”. In every 500 mm the vertical elements have welded cup connections – “lower cup” produced from the high-quality steel, with the attached mobile cups – “upper cup” produced from ductile casting. They provide support for horizontal elements. The horizontal elements provide the framework rigidity.

H20 Timber beams TAVR are designated for application as a bearing element of wall formwork. The flanges are made of solid oriented wood, that helps the beam to have very high load-bearing capacity. Plywood web made of high-quality Northern coniferous trees has a width of 24 mm. Beams up to 3 meters long produced of undisturbed strip. For production beam over 3 meters long wall is interlocked with a quality longitudinal pin (3 cm). The web and flanges are fixed by glued mini-dovetail jointing. The beam surface was treated with a special yellow paint that made its surface weather resistant and all beams are supplied with plastic caps that helps to protect them from damages and prolong it`s service life. Warranty period is 40 cycles. We use only modern European manufacturing equipment and pay much attention to the quality control.

Karkas Komplekt has been operating on the market for over thirteen years and has established itself as a reliable manufacturer and supplier of timber I-beams in Russia and Europe. The mission and goal of our company is to promote Canadian timber I-beam production technology on the Russian and European markets, as well as to control and improve the quality of the produced structures. In order to achieve this, we use Nascor technology and purchase materials only from the best Russian and foreign manufacturers. All our products are certified and have successfully passed all strength tests. Our products are recognized as one of the most rigid and reliable timber structures in construction. Moreover, our products go through a triple rejection process before the customer receives the order.