Industry - Import export

As a result of the geographical location of TCM - THOMAS CONSTRUCTIONS MECANIQUES in the heart of the Vosges, the paper industry is also one of the four historical sectors of activity that have driven our growth. We work closely with the main paper mills in the region which, despite the increasing global nature of their business, have still shown us unfailing loyalty. Beyond special machinery, this collaborative work has helped us to develop specialist expertise in : the upgrading of existing production plants to reduce set-up and adjustment times and increase productivity conveyor systems and roller elevators Applications and projects : conveyor systems roller elevators special packaging and wrapping machines the upgrading of existing paper mills to reduce set-up and adjustment times and increase productivity Related operations on customers’ sites : maintenance of equipment and infrastructure repairs

Evaluating the status quo Identifying improvements and areas for optimisation Defining new procedures Rationalising stock levels in relation to production times IT tools to interface with the main ERP applications on the market, providing full monitoring data on the customer’s entire supply chain Production material management Handling, supply of production lines, JIT and JIS feeding, job order preparation Storage, stock control, customer order preparation and packaging, packing, labelling, product configuration, kitting and customisation.

A maintenance and repair workshop to guarantee the best performance of all our machines and vehicles. A breakdown service with fully equipped vehicles available 24/7. A drive-in service for rapid delivery of all the required construction supplies and equipment. A mobile fuel distribution service to supply our machines directly on site. An intelligent organisation for the transport of equipment of all types and sizes. A signalling service for optimum safety at every stage of the project. A laboratory and a research and development unit

In food industry we use h«gh quality rubber mixture with corresponding characteristics. Purity and inertia are the most important requirements in making parts for the food industry, ttgh technological characteristics of such products require a standard that ts acceptable in the tield of pharmaceutical industry as well. Sp&oal requirements are attended through recipes owned by Hemogum and allow a long-term contact of food products with a finished piece. Elastomers that we use allcw the chemical purity, air and water free, low reactions of produced pieces, minimal absorption of ingredientsand excellent mechanical properties.

As a result of the geographical location of TCM - THOMAS CONSTRUCTIONS MECANIQUES in the heart of the Vosges, the agri-food industry is one of the four historical sectors of activity that have driven our growth. Among other organisations, we work with the main industrial cheese dairies in the region, which have shown us unfailing loyalty. Beyond special machinery, this collaborative work has helped us to develop specialist expertise in : the use and machining of stainless steel dosing systems for viscous foodstuffs food elevators Applications and projects : conveyor systems stacking systems food elevators process piping robotic units special packaging and wrapping machines dosing workstations cleaning systems control cabinets with PLC Related operations on customers’ sites : maintenance of equipment and infrastructure repairs technical upgrading of existing equipment Safety compliance of existing equipment

Trust in our experience and expertise to upgrade your existing industrial equipment in order to make it more technical and efficient and ensure its compliance. Our specialised teams will take care of : the technical upgrading and modernisation of your existing equipment in order to reduce your set-up times and/or increase productivity, as well as extending its operating life. the assurance that your facilities are compliant with the latest legal requirements in terms of safety/regulations. These operations can be carried out with the support of your maintenance teams or independently by our teams. We should specify that our teams have all the necessary clearances and qualifications, the insurance coverage for this type of work, and are highly experienced in on-site operations. Upgrade and retrofit operations are necessary to make significant productivity and operating gains, offering a particularly good return on your investment.

Customised, optimised storage; picking and packaging logistics Order collection, supply of lines, synchronisation with production cycles Management of procurement, reception and customs clearance Product customisation (labelling, packaging) Sample collection and returns management Quality control on raw materials, semi-finished and finished products Reconditioning and repackaging of garments Integration with outsourced work Packaging and co-packaging Planning, coordination and implementation of combined distribution systems: cross-dock, merge-in-transit Specialist transport and hanging garment shipments: dedicated shuttles, delivery to department stores, shops, home delivery

Transmec Group provides high-tech services to the supply chain sector via a range of facilities supported by state-of-the-art computer systems and latest technology. Via two separate companies, Transmec Log and Transmec To Be, we offer our customers a planned, dynamic and efficient service based on project analysis, implementation and constant research.

Dutch Scrap Recycling B.V. Is the leading trader in Iron, Aluminium, copper, plastic, rubber , Paper, PVC wires and PVC Pipes in the Netherlands and Continues to Be a Family Business With Four Generations Working to Innovate the Recycling Industry.

We plan and perform your complete process validation. From the first gap analysis and risk management, planning, execution and reporting. We support you with full project management, providing support where needed. You free your ressources for your projects, we take care for validations and all connected activities. You reach your goals safely, quicker and faster.

We carry out projects quickly and without loss of quality. You have short project durations, thus lower costs and a quick return on investment. Contact us for an initial discussion! Our projects often combine Technical and regulatory issues: •Technology & technology transfer (adapt, improve technologies) •Optimise in production •Quality projects (Quality by Design "QbD", Process Analytical Technology "PAT", test design, validations, qualifications) •Short processing times in administration •Improve the supply chain We optimise supply chains, develop suppliers, um/damit: •"Shorten "Lead Times •the supplier reacts quickly •broaden the supplier base •find new suppliers •Relocate productions We take over technical projects like: •"Scale up" in biotechnology and pharmaceuticals •Model and simulate production steps in biotechnology and pharmaceuticals •Improve production processes (quality, process) •modelling new or modified buildings ("virtual factory") •simulate

CNC systems, industrial robots and accessories for every requirement Products manufactured by Fanuc stand for the highest quality and meet the user's specific requirements. We have particularly specialised in CNC systems, industrial robot components, drives and motors for the globally leading company that specialises in the factory automation sector. With our extensive portfolio consisting of repair, sale and service we will be happy to help you at any time – regardless of whether you have got a faulty FANUC module or quickly require a replacement or new part. With over 40,000 FANUC assemblies, we have a suitable solution for every requirement.

Tubular shelving is modular and convertible

Projects to install industrial doors for warehouses or the logistics industry

Platform structure on posts used as a mezzanine in storage warehouses

Siemens industrial controls The following options are available for industrial controls from the SIRIUS product range manufactured by Siemens Purchase a reconditioned replacement part or new part Replace a reconditioned replacement part or new part Purchase product overhaul repair or cleaning & inspection services We will be happy to supply an on site service incl. support over the phone, upon request. Our extensive replacement parts warehouse with more than 100,000 instantly accessible modules provides our customers with a fast supply of replacement parts ensuring the costs of machine downtimes are kept to a minimum. All of the repaired modules, exchange services and replacement part deliveries of Siemens industrial controls from the SIRIUS product range come with an 24 month warranty*.

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

The VX4000 is the world's biggest industrial 3D printing system for sand molds. It has a cohesive build space measuring 4,000 x 2,000 x 1,000 mm (LxWxH). This machine can be used to economically produce very large individual molds, a great many small series components or a combination of the two. With its uniquely large volume, the VX4000 maximizes productivity and flexibility. The unique and patented layering process was specially adapted for this printer. Instead of lowering the building platform during the printing process, the print head and coater are raised with each layer. As a result, the machine can bear the enormous weight of the building platform, which can be quickly exchanged via a rail—making it possible to print nearly continuously. Sand can be used as the particulate material. The VX4000's print head system can achieve a resolution of up to 300 dpi. A layer applied in one cycle is 300 µm thick.

The VX2000 is a 3D printer for industrial applications. It is a particularly good choice for cost-effectively producing large-format models from sand cores for prototyping. The VX2000 can also be used to economically manufacture small-series components. The machine is fast and easy to operate. The build space measures up to 2,000 x 1,000 x 1,000 mm. The VX2000's print head system can achieve a resolution of up to 300 dpi. A layer applied in one cycle is 300 µm thick.

Our international bestseller: the VX1000 is a universal 3D printer for industrial applications. The machine is fast, easy to operate and enables you to cost-effectively produce medium-sized molds, cores and models for making prototypes. The VX1000 is also suitable for producing small series. Plastic and sand can be used as the particulate material. The piezo print head system of the VX1000 achieves a resolution of up to 600 dpi. The machine's build space measures 1,000 x 600 x 500 mm. The thickness of a layer applied in one cycle is 150 µm for plastic and 300 µm for sand. In addition, the VX1000 concept is environmentally friendly: In plastic processes, the unprinted particulate material is recyclable.

The VX500 is a 3D printer for industrial applications that has been tried and tested many times over in practice. These machines can be found wherever there is a demand for the straightforward production of prototypes and models. Despite their compact dimensions, they captivate with the features of a high-performance printer, such as multi-jet print heads, integrated material handling and job boxes. The machine is very fast, easy to operate and permits cost-effective production of both individual parts and small series alike. Plastic can be used as the particulate material. The machine's build space measures 500 x 400 x 300 mm. The VX500's print head system can achieve a resolution of up to 600 dpi. The thickness of a layer applied in one cycle is 150 µm. In addition, the VX500 concept is resource-friendly: In plastic processes, the unprinted particulate material is recyclable.