Thermal%20insulation%20materials - Import export

The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance

Soundproof Cork Underlayment for flooring is something that most people don't think about on a daily basis unless you are in an occupation which deals with flooring. Create high performance sound control with Rubber Cork underlayment. Corck Rubber products provide superior impact noise and foot step sound reduction. Better sound reduction than many foam products and superior compression recovery performance. The high performance recycled Rubber Cork sound control underlayment may also be used with ceramic and natural stone flooring. Usage areas Sound Insulation Cork Rubber is used for controlling noise in condominiums, apartments, multifamily dwellings, commercial buildings, and other areas where footfall and impact noise can be the cause of occupant complaints. Sound insulation cork rubbers should use in; Classrooms

Soundproof Rubber Soundproof rubber floor underlayment is a high quality performance acoustic underlayment made from rubber material which is designed to provide a resilient layer to reduce the passage of impact transmission noise. The purpose of a sound control floor underlayment is to decouple the finished floor surface from the subfloor and ceiling assembly below, thus disrupting the path of structure borne noise, typically footfall. Usage areas Sound Insulation Rubber is used for controlling noise in condominiums, apartments, multifamily dwellings, commercial buildings, and other areas where footfall and impact noise can be the cause of occupant complaints. Sound insulation rubbers should use in; Classrooms, Home Theaters, Doctors Offices, Gymnasium, Fitness centers, Laundry Rooms, Quiet Rooms, Sound Recording Studios, Offices and where where where its needing to underlayment sound insulation.

Soundproofing Barrier Roll allows you to enjoy the amazing sound dampening and sound blocking quality of our Quiet Barrier. This highdensity, nonporous material is one of our most popular soundproofing solutions because of its ease of use and tremendous effectiveness. Sound Insulation Barrier protects you from everyday noise; construction sounds, traffic and noisy neighbors. Soundproofing Barriers also protects dampens vibratory impact noise. When you cover your walls, ceilings or floors with Quiet Barrier Soundproofing Roll, you will enjoy clear sound inside the covered area while preventing sound from penetrating or escaping, giving you peace and privacy. Usage areas For easy soundproofing at home, recording

PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite

Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

FLL-certified roof protection layer made of soft PVC for installation on non root-proof roofs, for forming a watertight and root-proof basin on green roofs with water accumulation and as water-proof and root-proof lining in planters.

Optigrun root protection membranes are used on non-root-resistant roof waterproofing under extensive and intensive roof greenings.

Optigrun Structured Storage Fleece SSV 800 is used as a protection fleece for pitched roofs with a combined functionality of water storage and drainage.

Thin sheet made from recycled polyethylene for use as a separation, protection and slip sheet.

as a protection, separation and slip layer to protection the waterproofing as a second slip layer in conjunction with PE film 0.2 mm under public areas to prevent the transfer of shear and tensile forces for the chemically neutral separation of two incompatible materials Specific properties resistant to bitumen and polystyrene resistant to most chemicals smooth surface ageing resistant moisture-blocking thermally weldable

Special fleece to protect roofs, providing a combination of protection, separation and glide functions. Suitable for public roofs when its laminated glide layer is used in combination with an approximately 0.2 mm thick PE foil, thus conforming a glide fleece.[Translate to English:] Special fleece to protect the roof waterproofing with a combined separating and sliding function In combination with the PE separating and sliding film TGF 0.2, it is suitable as a protective and sliding layer for traffic roof structures Coefficient of friction with additional PE film <0.6 according to the requirements of the FLL (DIN 53375)

Optigrun Filter Fleece FIL 300 is used as a filtration layer between the drainage and gravel layer on public roofs that are used by trucks and cars.Horizontal filter layer on green roofs between drainage and gravel base layer, under public areas with cars and trucks circulate, as well as pedestrians Filtration of particles from the substrate Puncture resistance 3,800 N (EN ISO 12236) Vertical water permeability 57 l/s x m² (EN ISO 11058) 21 kN/m resp. 24 kN/m max. tensile strenght longitudinal/lateral

Filter fleeces are horizontal filter layers between drainage, substrate or gravel layers. They are used to separate the various layers and prevent fine particles of the substrate from being slurried into the underlying layers.Horizontal filter layer on green roofs between drainage and substrate layers with areas with increased loads Filtration of particles from the substrate Puncture resistance 1.700 N (EN ISO 12236) Vertical water permeability 90 l/s x m² (EN ISO 11058) 10,5 bzw. 10 kN/m max. tensile strenght longitudinal/lateral

Optigrun Filter Fleece FIL 105 is used when the drainage system needs to be protected from fine particles entering from the substrate layer.Horizontal filter layer on green roofs between drainage layer and substrate Filtration of particles from the substrate Puncture resistance 1,200 N (EN ISO 12236) Vertical water permeability 130 l/s x m² (EN ISO 11058) 7,5 kN/m max. tensile strenght longitudinal/lateral

Trickle protection on the insulation level for inverted roofs, without requirements concerning joint building authority approval for insulating material and the separating layer. Trickle Protection on the insulation level for inverted roofs. without requirements concerning joint building authority approval for insulating material and the separating layer Prevents fine particles from forming sludge in the drainage layer Puncture resistance 1,500 N (EN ISO 12236) Water permeability 100 l/s x m² (EN ISO 11058) Cannot be used as a replacement for separating layers from various manufacturers and approval by the building authority

Optigrun Protection and Storage Fleece RMS 900 protects the roof membrane against damage from high mechanical demands. Protective layer on waterproofing with an additional separating and water reservoir function Particularly suitable as a protective layer on waterproofing with a moderate mechanical load For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture resistance min. 2,500 N (EN ISO 12236)

Optigreen separating, protective and storage fleeces protect the roof waterproofing or root protection membranes from mechanical stress, separate layers that are incompatible with the material and store water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline With a high pyramid puncture resistance in accordance with DIN EN 14574 Puncture resistance min. 1,500 N (EN ISO 12236)

Optigrun Protection and Storage Fleece RMS 500 protects the roof membrane or root barrier membrane against damage from light mechanical demands, separates the materials of incompatible substrates from one another and, depending on the product and its function as protective fleece, stores water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture restistance min. 1,000 N (EN ISO 12236)

Optigrun Protection and Storage Fleece RMS 300 protects the roof membrane or root barrier membrane against damage from light mechanical demands, separates the materials of incompatible substrates from one another and, depending on the product and its function as protective fleece, stores water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture restistance min. 1,000 N (EN ISO 12236)

High-Temperature insulating hose (HT hose) protects heat-conveying lines and prevents thermal damage to adjoining parts with a fiberglass and double-coated silicon rubber top layer. The HT hose is available as a self-contained or re-closable sleeve as well as a custom-made mat. The approximate surface temperature of the duct can be up to 500°C.

Optigrun Protection and Storage Fleece RMS 500 K protects the roof membrane with simultaneous function of separation, water storage, excellent suction and defined filter function. Installation under the green roof structure directly on the waterproofing Protective layer on roof waterproofing with particularly good suction and capillary action Especially to avoid ponding on uneven roofs Puncture resistance 2,600 N (EN ISO 12236)

Thermal insulation concrete is used for insulation of thermal plants, and can also be a replacement for thermal insulation bricks. The hydraulic connection ensures a stable lining. It comes in extra strong plastic bags, on a pallet, wrapped in shrink wrap

These are specific materials for use in the thermoelectric sector and in thermo-mechanical applications. The range includes: Mica Continua Muscovite / Phlogopite is available in rigid or flexible sheets, tubes and / or shaped particles according to customer specifications. The main applications are in the following sectors: household appliances, packaging, lighting and electric heaters. Cementitious or calcium silicate based asbestos substitutes for all thermo-mechanical applications up to 1000 ° C Antistatic laminate to be used as a soldering template for printed circuits Misoglass1 / Deltherm1 have been designed to be used in all applications where thermal insulation is required under compressed conditions.

PIR insulation board for external walls - ETICS

PIR insulation board for suspended ceilings.

PIR insulation board with aluminum coating. Lambda = 0,024 - 0,026 W/mK.

PIR insulation board with aluminum coating. Lambda = 0,022 W/mK.