Sensors - Import export

Parameters Basic Parameters Bus Power Supply: 9～32VDC Current consumption (static)：≤14mA（FF/PA） 11V～35 VDC(HART) Input Signal: Pt100, Pt1000, Cu50, Cu100 Ω, 0, 0 to 500 ~ 4000 Ω Resistance, B, E, J, N, K, R, S, T eight degrees of Thermocouple, -100mV ~ 100mV Voltage Signal The Channel Number: Single Channel Fieldbus Protocol: FF/PA/HART Insulation: Between the Terminal and the Housing：500Vrms(707VDC) Operating Temperature: -40℃～85℃ Humidity Range: 0%～95%RH Starting Time: ≤5secs. Turnover Time: 0.5secs. Electromagnetic Compatibility: In Line with the GB/T 18268-2010 Explosion-Proof Sign: Ex ia IIC T4 Ga (HART)

THA 200 THA 400 THA 1000 THA 1250 Compatible with any thermocouple probe type K, J or T (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THK 200 THK 400 THK 1250 Compatible with any thermocouple probe type K, J, T or R/S (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

THN 200 THN 400 THN 1250 Compatible with any thermocouple probe type K fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

USB temperature converter - including free readout software - efficient and flexible measurement without additional measuring system - mobile and directly on site - for all common thermocouples.USB stick with software for direct reading and further processing on the PC Plug connection - flexibly connect the USB stick to the temperature sensor Processing of the measured values, transfer to the software Different temperature sensors and thermocouples possible Various cable types , lengths and types of connections can be selected

Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements over the last few years regarding measurement accuracy and reliability of temperature measurements has meant that many equipment operators must reconsider the suitability and performance capacity of their temperature measurement equipment. Resistant thermometers can be used between -200 °C and +850 °C. An important common property is that their output parameters are available in the form of electric signals that can be relatively easily transferred to measurement and control instruments for processing, storage and display.

This temperature sensor is for measuring the temperature of liquid and gaseous media in engines, sets of machines and utility vehicles. A Pt 1000 thin-film precision resistor is used as the measuring element. The temperature-dependent resistance of the Pt 1000 is evaluated by an electronic circuit and outputted as a temperature-dependent voltage at the sensor‘s output. The interrelationship between temperature and voltage corresponds to the characteristic curve for the Pt 1000 and is thus nearly linear. The assignment between temperature and output voltage is nearly freely selectable, the lesser temperature corresponding to the lesser output voltage. The sensor‘s lowest possible output voltage is 0.1 V and its greatest is 10 V. The output is overload-proof and short-circuit-proof. The sensor has no mechanical moving parts and so is not susceptible to vibration and soiling.

Micro Environment Monitoring System, Integrated Temp/Humidity Sensor, POE. The ENVIROMUX® Micro Environment Monitoring System (EMS) monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via external USB 3G modem). The system functions independently or as an IP-connected remote sensor for the ENVIROMUX-2D/5D/16D. The ENVIROMUX-MICRO-T features an integrated temperature sensor, two RJ45 sensor ports for external temperature/humidity sensors, and two dry contact inputs. The ENVIROMUX-MICRO-TRHP features an integrated temperature/humidity sensor, two RJ45 sensor ports for external temperature/humidity sensors, two dry contact inputs and built-in Power over Ethernet (PoE).

Brass stick-in sensor, Pt100. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Connection using fixed cable, straight cable outlet. Linear temperature response characteristics. Available as 2-wire or 4-wire. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or an NTC thermistor measuring element. Approvals: DNV-GL

Brass screw-in sensor, Pt100/Pt1000. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Exchangeable gauge slide. Available in various immersion depths. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with 1x Pt100, 2x Pt100, 1x Pt1000 or 2x Pt1000 measuring elements. Approvals: DNV-GL, LR

Brass stick-in sensor, Pt100/Pt1000. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Exchangeable sensor unit. Various immersion depths available on request. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with 1x Pt100, 2x Pt100, 1x Pt1000 or 2x Pt1000 measuring elements. Approvals: DNV-GL

Stainless-steel flange sensor, Pt100/Pt1000 Compact, robust and enclosed design. Ideal for transport technology, thanks to their construction and type test as per DIN EN 50155. Simple assembly via flange design. Available in various immersion depths. Simple customised cable assembly, optionally with increased insulation voltage > 2 kV AC. Available as 2-wire, 3-wire or 4-wire type. Maintenance-free. Reduced-weight design; also available with 90° cable outlet (see TA14) or 90° cable outlet (see TA14).

Brass stick-in sensor, Pt100. Compact and robust design. Simple assembly with protection tube. Various immersion depths available on request. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available.

Stainless-steel stick-in sensor, Pt100/NTC thermistor. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly with protection tube. Connection using tab connector, cable outlet at the side. Pressure resistance up to 40 bar. Available in various immersion depths. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or an NTC thermistor measuring element. Approvals: BV, DNV-GL

Stainless-steel stick-in sensor, Pt100, integrated measuring amplifier. Compact and robust design up to protection class IP68. High accuracy, with integrated signal converter (standard industrial signals). Available in various immersion depths. Over voltage and overload protection. In 2-wire or 3-wire version. Can be used universally; suitable for long line lengths. Measuring ranges can be customised.

Stainless-steel flange sensor, Pt100/Pt1000 Compact, robust and enclosed design. Ideal for transport technology, thanks to their construction and type test as per DIN EN 50155. Simple assembly via flange design. Available in various immersion depths. Simple customised cable assembly, optionally with increased insulation voltage > 2 kV AC. Available as 2-wire, 3-wire or 4-wire type. Maintenance-free. Reduced-weight design; also available with 90° cable outlet (see TA14) or straight cable outlet (see TA18).

Stainless-steel flange sensor, Pt100/Pt1000. Compact, robust and enclosed design. Ideal for transport technology, thanks to their construction and type test as per DIN EN 50155. Simple assembly via flange design. Available in various immersion depths. Simple customised cable assembly, optionally with increased insulation voltage > 2 kV AC. Available as 2-wire, 3-wire or 4-wire type. Maintenance-free. Reduced-weight design; also available with 45° cable outlet (see TA17) or straight cable outlet (see TA18).

Copper screw-in sensor, Pt100, NTC thermistor. Compact and robust design. With Pt100 or thermocouple measuring element. Simple assembly via screw-in thread. Suitable for bearing temperature measurement. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available.

Stainless-steel stick-in sensor (B form), Pt100/Pt1000, thermocouple, NTC thermistor. Compact and robust design (form B connection head). Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Sensor elements: Pt100, Pt1000, NTC thermistor, type K or type J thermocouple; two integrated sensor elements available as an option. Increased measuring range up to 800 °C. Available in various immersion depths. Form B connection head. Available with integrated measuring amplifier. Approvals: BV, DNV-GL, LR

Stainless-steel stick-in sensor, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly in protection tube. Sensor elements: type K o type J thermocouple. Available in various immersion depths. Straight cable outlet. Available in various cable lengths. Increased measuring range up to 800°C. Approval: BV, DNV-GL, LR

Stainless-steel/brass screw-in sensor, Pt100/Pt1000. Compact and robust design. Simple assembly via screw-in thread. In a stainless-steel or brass version. Available as 2-wire or 3-wire. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or Pt1000 measuring element.

Stainless-steel screw-in sensor, Pt100, NTC thermistor. Compact and robust design. Simple assembly via screw-in thread. Pressure spring achieves constant contact with the measuring point. Available in various immersion depths. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or an NTC thermistor measuring element.

Stainless-steel stick-in sensor (B form), Pt100/Pt1000, thermocouple, NTC thermistor. Compact and robust design (form B connection head). Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via protection tube Sensor elements: Pt100, Pt1000, NTC thermistor, type K or type J thermocouple; two integrated sensor elements available as an option. Increased measuring range up to 800 °C. Available in various immersion depths. Form B connection head. Available with integrated measuring amplifier. Approvals: BV, DNV-GL, LR

Stainless-steel stick-in sensor, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Type K or type J thermocouple; two thermocouples per sensor available as an option. Available in various immersion depths. 90° cable outlet. Increased measuring range up to 800 °C. Available in various cable lengths.

Stainless-steel screw-in sensor, Pt100 Robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly for bearing temperature measurement. Available with a levelling piece and screw-in gland, as well as a compression fitting. Available in various immersion depths. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with 1x Pt100, 2x Pt100 or 3x Pt100 measuring elements. Approvals: BV, DNV-GL, LR

Aluminium flange sensor, Pt100, NTC thermistor. Compact and robust design. Simple assembly at the measuring point. Space-saving dimensions. Available as 2-wire or 4-wire type. Maintenance-free. Compatible measuring transducers, limit value switches and analogue indicators available. Design available with a Pt100 or an NTC thermistor measuring element.

Stainless-steel stick-in sensor, Pt100, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Pt100 measuring element or type K or type J thermocouple; two thermocouples per sensor or two Pt100 measuring elements available as an option. Available in various immersion depths. 90° cable outlet. Increased measuring range up to 800 °C. Available in various cable lengths. Approvals: DNV-GL, LR

Temperature Sensor with ceramic isolation The temperature sensors of the TF Series are ideal for exact temperature measurements in highly sensitive medias. The ceramic insulation guarantees a direct reading of the melt temperature. Any influences by the flange or tool temperature are reduced to a minimum. The ceramic encases the measuring element and isolates it from the surrounding area. The design of the TF conforms to the recommended guide lines of the Plastics and Rubber trade association according to EUROMAP 31.

The TF-MX Series was developed in order to measure melt temperatures quickly and easily for all types of plastics. The temperature sensors are economical and versatile and impress with their robustness and reliability. The rheological characteristics of innumerable plastics were considered during the design procedure of the conical measuring tip, so that highly viscous medias can be ascertained without any greater problems. Major advantages regarding the life-span and reliability of the sensor in comparison to sword sensors are ensured due to the correct installation procedure.