Surface profiling - Import export

T Profiles ( Any surface

L Angles Profiles (Any Surface)

Equal Angles Profiles ( Any Surface)

Aluminium Shower Cabin Profiles (Any Surface)

The oven is specially designed for the transfer process that works with the sublimation principle to give wood, marble or special effects to the outer surface of aluminum profiles and sheets. The pattern on a polyester film is transferred to the outer surface of the previously base powder coated aluminum profiles or sheets using vacuum application and heat. Wood effect transfer system consists of a trolley with special vacuum heads, a vacuum pump system, sublimation oven with circulation system and fully PLC control system.

15x120 Surface Coating Profile

Designed for 90 assembling of a aluminum profiles Top press and knive movoment is pneumatic system Milimetric ruler system for height and progress of knives Centerin setsquare is pneumatic Discharge button is available for precision adjustment Two pneumatic pedal is using for clamping/li> Polyamide plate profile surface avoid damage 45 side supports arms are available

KP 120 machine is designed and constructed for the hydraulically crimping and correct assembly of aluminum profiles . The machine is semiautomatic and the machining cycle of various units are manual controlled by user who always stays outside of the dangerous area. It is designed through the hydrauliccally crimping system Steel construction of the machine table that is strong and lasting Practically adjustment of the knives according to the shape and height of the profiles Practically adjustment of the cylinder feed and profile stops by means of the milimetricruler The machine is equiped with the pneumatic (for clamps ) and hydraulic (for crimping ) foot pedals for the operation control during the machining cycle Double-acting centering setsquare returns to the home position under the table after crimping Powerfull hydraulic pump with 2 x 5 tons capacity Protection plates made of Polyamide material to prevent being scrathes on the profile surface

PRODUCT INFORMATION AIM 4420 is a 4-axis servo-controlled machining center that is designed to perform drilling, grooving, notching, taping, sawmilling, etc. on all kinds of aluminum & PVC profiles, light alloys in general and thin-walled steel profiles. Efficient and economic processing on the three sides of the profiles is possible with this fully automatic machining center. General Features: • It is designed to make operations on three surfaces of the profiles such as a hole, slot, corner relieve, saw cutting, tapping, flow drilling, etc. • CNC automation system providing motion control at 4-axis • Linear type of magazine unit for 11 standard tools and Ø180 mm of the saw blade • Flow drilling and tapping feature by means of encoder spindle (optional) • Automatic clamp recognition and clamp positioning are available • CNC controlled spray tool lubrication system • Pneumatically working 4 pcs of clamps for gripping the workpiece

PRODUCT INFORMATION KP 120 machine is designed and constructed for the hydraulically crimping and correct assembly of aluminum profiles. The machine is semiautomatic and the machining cycle of various units are manual controlled by user who always stays outside of the dangerous area. It is designed through the pneumatically crimping system Steel construction of the machine table that is strong and lasting Practically adjustment of the knives according to the shape and height of the profiles Practically adjustment of the cylinder feed and profile stops by means of the millimetric ruler The machine is equipped with the pneumatic (for clamps ) and hydraulic (for crimping ) foot pedals for the operation control during the machining cycle Double-acting centering set-square returns to the home position under the table after crimping Powerful hydraulic pump with 2 x 5 tons capacity Protection plates made of Polyamide material to prevent being scratches on the profile surface

PRODUCT INFORMATION The new concept in copy routers, this single head copy router has the ability to program X, Y, Z and C coordinate with 4 axis servo controlled motors. It is used for the processing of slots for locks, drilling handles, hinges, espagnolette holes, and opening water drain slot on PVC and aluminum profiles, this means no more template GENERAL FEATURES Designed for the day-to-day operations on PVC, aluminum and low alloy materials the four surfaces of profiles at the same time Equipped with servo controlled table mechanism to stop the turning table and machining the profile in any angle among the 0°/90°/180/270° Working capacity X: 300 mm, Y: 120 mm, Z: 115 mm Profile clamping width (Wmax / Wmin): 120 X 30 mm Profile clamping height (Hmax. / Hmin.): 115 X 30 mm Profile clamping length: (Lmax. / L min.): 3000 X 400 mm ER 16 tool collets Equipped with variable speed spindle adjusted from 0 to 12000 rpm with 2.2 kW PLC control system

1.Carrier lower base profile base surface width is 117 mm. 2.Lower carrier profile vertical height are 9 and 14 mm with two alternatives and Water inclined has at 14 mm height threshold profile. 3.At case and side profile junction there is no plastic injection. Alluminium profiles are linked to each other with screws in order to provide uninterrupted conjuction. 4.Above glass panels; there is no additional panels. Centering is supplied thanks to component that is mounted inside upper case profile . 5.Balanced and without flexure operation is provided by courtesy of carrier channel located at lower rail profile. 6.There is no need any additional component or application under favour of first wing profiles are handler itself. 7.Center channel is existed at wing profile as moving profile in order to prevent axial leakage. Additionally; intersection between glass and aluminium the wing profile is specially designed in order to prevent glass leakage.

1.Loadbearing lower case profile within base surface of width is 48 mm, aforesaid ; other loadbearing profile; withinupper case is 40 mm. Within existence of these profiles inside; there are two separately functioning channels independent from each other in order to fullfill the duty of carrier. 2.Through vertical height of lower carrier; trio cubicle drip cap case profile is used. 3. Thanks to trio cubicle profile ; the outdoor is invisible and indoor air ingress is prevented directly .Under favour of hair gasket along with within case profile uninterrupted hair cord can be easily implemented .. 4.Thanks to centering channel , at wing profile as moving profile;axial leakage is prevented additionally possibility of any excess sealant within joint of glass and aluminium is preserved. 5.Aluminium caps shutting down wing profile outrightly moreover plastic cap is not used within wings. 6.All pitch joint details (sections of; sub strut and pitch joints I possessing the same design...

1.Loadbearing lower case profile within base surface of width is ; 54,5 mm, aforesaid other loadbearing profile; within upper case is 46,4 mm. Existence of these profiles inside; there are two channels operating separately from each other performing the duty of carrier. 2.Through vertical height of lower carrier; cubicle waterspout is implemented. The height of initial cubicle is 11 mm and is inclined. 3.By courtesy of trio cubicle profiles; the exterior is out of sight and air ingression is prevented directly. 4.Under favour of lenghtwise hair cord channel at case profile , hair cord might be implemented continuously. 5.Within moving wing profile; thanks to centering channel ; axial run outs are prevented. Additionally; carrier profile ; preserving any excess sealant within joint of glass and aluminium. 6.Aluminium caps shutting down the wing profile outrightly moreover plastic cap is not used within wings. 7.

The equal spreading and density of the fibers at each point of MDF allows both sides of the plate, as well as the edges, to be processed by the machine without any breakage or gaps between the material particles. Thus, MDF can be used successfully in the production of parts such as table surfaces, door panels and drawer faceplates having chamfered edges or profile surfaces. MDF is that it has high bending resistance, elasticity mode, screw and nail withdrawal resistance. The main features of us are that they are easy to process in a machine, the perfection of stability, the almost immutable dimensions, and the advantage of being provided in standard dimensions. Decorative papers used for Melamine coated MDF (MDFLAM), which is a product obtained by pressing the decorative papers impregnated with melamine resin onto MDF boards under certain temperature and pressure are also supplied. Please feel free to ask or request a question or a offer.

Manufactured qualities : 304, 304L, 316, 316L, 316Ti, 321, 409, 409L, 430, 430Ti, 436, 439 ( according to AISI norm )manufacture norm : DIN 17455, DIN 17457 Measure and tolerance norm: EN ISO 1127 Production interval stainless steel pipe : 9x0.6mm – 114x4,0mm> Production interval stainless steel profil : 10x10mm – 80x80mm Surface process. Processless. 180 - 220 - 320 - 440 Sand grinding. onur@ucelsteel.com

Manufactured qualities : 304, 304L, 316, 316L, 316Ti, 321, 409, 409L, 430, 430Ti, 436, 439 ( according to AISI norm )manufacture norm : DIN 17455, DIN 17457 Measure and tolerance norm: EN ISO 1127 Production interval stainless steel pipe : 9x0.6mm – 114x4,0mm> Production interval stainless steel profil : 10x10mm – 80x80mm Surface process. Processless. 180 - 220 - 320 - 440 Sand grinding. onur@ucelsteel.com