Diesel engines - Import export

Performance Standard : API SN/ SM / SL SAE 0W20 API SN/ SM / SL is an advanced full synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. SAE 0W20 API SN/ SM / SL gasoline engine oil meets the requirements of various vehicle manufacturers and industry standards and outperforms conventional oils. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers Applications : SAE 0W20 API SN/ SM / SL gasoline engine oil is recommended by DANA Lubes for SAE 5W-20 and 0W-20 applications in all types of gasoline fueled passenger cars, SUV’s, vans, and light trucks. It is engineered to help deliver outstanding engine protection and fuel economy benefits. It is recommended for extreme cold conditions to help deliver quick starts and fast lubrication. It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the...

SAE 5W30 API SN/ SM / SL GASOLINE ENGINE OIL is an advanced full synthetic engine oil designed to keep your engine running like new by providing exceptional wear protection, cleaning power and overall performance. SAE 5W30 meets or exceeds the requirements of the industry’s toughest standards and outperforms our conventional oils. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers Applications : SAE 5W30 API SN/ SM / SL GASOLINE ENGINE OIL is recommended for all types of modern vehicles, including high-performance turbo-charged, supercharged gasoline and diesel multi-valve fuel injected engines found in passenger cars, SUVs, light vans and trucks. It is general purpose engine oil for all types of cars It is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.

Performance Standard : API CJ4/CI4/CH4 SAE 10W30 diesel engine oil is an extra high performance diesel engine oil that extend engine life in the most severe on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines including those with Exhaust Gas Recirculation and Aftertreatment Systems with Diesel Particulate Filters and Diesel Oxidation Catalysts. Fully backwards compatible, SAE 10W30 will also delivers excellent performance in older conventional engines. As a result, it meets the requirements of API CJ4, CI4 PLUS and CH4 service categories as well as key Original Equipment Manufacturer (OEM) requirements. SAE 10W30 is the result of extensive cooperative development work with major OEMs and is recommended for use in a wide range of heavy duty applications and operating environments found in the trucking, mining, construction, quarrying, and agricultural industries.

Performance Standard : API CJ4/CI4/CH4 SAE 15W40 diesel engine oil is a high performance diesel engine oils that help increase engine life in the most severe on and off highway applications while delivering outstanding performance in modern, high-output, low-emission engines including those with Exhaust Gas Recirculation and Aftertreatment Systems with Diesel Particulate Filters and Diesel Oxidation Catalysts. Fully backwards compatible, SAE 15W40 diesel engine oil will also deliver the same outstanding performance in older conventional engines. As a result, they meet or exceed the requirements of the API CJ4, CI4 PLUS and CH4 service categories as well as key Original Equipment Manufacture (OEM) requirements for 2007 engines. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers

Performance Standard : API CJ4/CI4/CH4 SAE 20W50 API CJ4/CI4/CH4 is high performance diesel engine oil that provides proven engine protection of diesel engines operating in severe service applications. SAE 20W50 diesel engine oil is recommended for use in a wide range of heavy duty applications and operating environments found in the trucking, construction, and agricultural industries. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers Applications : SAE 20W50 diesel engine oil is recommended for use in the most severe applications of modern on and off highway diesel engines. It increase engine life between overhauls in high speed/high load operations and in pickup/delivery operation modes in both two-cycle and four-cycle engines. Diesel-powered equipment from leading diesel engine manufacturers On-highway light and heavy-duty trucking

Base oil SN 600 is defined as a base oil at the upper end of the specifications for Grade I base oils. It is generally used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : SN 600 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Performance Standard : API SN/ SM / SL SAE 5W20 API SN/ SM / SL GASOLINE ENGINE OIL is an advanced full synthetic engine oil designed to keep your engine running like new by providing exceptional wear protection, cleaning power and overall performance. SAE 5W20 exceeds the requirements of the industry’s toughest standards and outperforms conventional oils. Its technology comes as standard equipment in many different vehicles, including select high-performance vehicles. EVO E – Extra Protection to Engine, Clutch & Gears V – Value for Money with 70% Extra Mileage O – Outstanding Performance in all Weathers Applications : SAE 5W20 is suitable for use in all types of modern vehicles where this viscosity grade is recommended. This includes high-performance turbo-charged, supercharged gasoline multi-valve fuel injected engines found in passenger cars, SUVs, light vans and trucks. SAE 5W-20 is a high-performance engine oil for all types of cars where this viscosity is recommended

Base Oil SN 900 is defined as a base oil at the upper end of the specifications for Grade I base oils. It is used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 900 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils

Base Oil SN 300 is a defined as a light grade base oil and is a Grade I base oils. It is generally used in lubricant and lubricant additives production. It has been solvent refined and hydrogen treated to take out impurities. Applications : Base oil SN 300 works as a base stock for several industrial lubricants General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils Features : In order to ensure its purity, it has been solvent refined, dewaxed and hydrogen treated oil. It has long shelf life High thermal Stability Free from harmful chemicals. Used in mould oil, transmission fluids, gear oils, metal working fluids and additives.

Base oil SN 150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 150 works as a base stock for several industrial lubricants. General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils

Base Oil SN 100 SN100 is a light base oil with its parameters being at the low end for lubricant stock. It is a Group I base oil made by further processing vacuum distillates of specific crude oil fractions. It is mostly used in lubricant and lubricant additives production. Applications : Base oil SN 100 works as a base stock for several industrial lubricants General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils

Refrigeration Oils are developed for refrigeration compressors and systems requiring ozone friendly HFC refrigerants. These Environmental Awareness Lubricants are developed to give: Excellent evaporator cleanliness. Less compressor wear. Low temperature fluidity. High system efficiency and proper oil return in refrigeration system designs. Applications : Refrigeration Oils are hygroscopic and care must be taken to avoid moisture absorption during handling. Packages should be closed properly when not in use, and small packaging should be preferred. Product should not be transferred to plastic containers that can allow moisture ingress. Applications include: Household refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Industrial applications such as food preparation and freezing, as well as cryogenic applications. Commercial refrigeration applications such as business, mall and hotel air conditioning, and low temperature transportation.

Anti Freeze 50% is a ready to use phosphate free, silicate-free, nitrite free and borate free ethylene glycol base coolant that is designed to give exceptional wet sleeve liner cavitation and corrosion protection of all cooling system metals. This is a pre diluted Antifreeze is developed with organic corrosion inhibitors to give total cooling system protection for 1,000,000 miles of on – road use. Applications : Antifreeze is recommended for use in: It is use in heavy duty diesel, gasoline and natural gas engines. Stationary engine applications regardless of fuel type being used. Marine cooling systems where freeze protection is necessary. Mixed fleets where both light duty and heavy duty trucks are present. Features and Advantages : Long service life: 1,000,000 miles of on road use. This is designed for use in engines running EGR, SCR and ACERT technologies that can extend cooling system temperatures. .

DANA Antifreeze is a high performance concentrated antifreeze formula that needs to be diluted before use. Applications : Antifreeze is recommended for use in applications requiring BS6580 – 1992 quality standard.Antifreeze must be diluted with water before use. It is hard water compatible and it can be mixed with tap water before filling into the cooling system. Water Specifications Hardness, °dGH (mmol/l) 0 – 20 (0 – 3.6) Chloride Content, ppm max 100 Sulphate Content, ppm max 100 Dilution Table Antifreeze Water Freeze protection 33 % 67 % -18°C 50 % 50 % -36°C 60 % 40 % -52°C Features and Advantages : Antifreeze holds Mono Ethylene Glycol and avert winter freezing and summer overheating over a 2 years period. Specifications : Antifreeze is recommended for use in applications requiring the following specification: BS6580-1992

Brake Fluid DOT 4 is a high performance hydraulic brake fluid. It is mainly use in automotive disc, drum and anti-skid brake systems and clutch systems. Applications : Brake Fluid DOT 4 is recommended for use in applications requiring disc, drum and anti skid braking systems used in average to high performance vehicles requiring DOT 4 level performance. Brake Fluid Dot 4 use only in its concentrated form out of a unopened or well sealed container Seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this can reduce service life. Do not reuse drained brake fluid. Brake fluid can affect the vehicles paint, so remove spills without rubbing. Brake fluid should be drained from the vehicle every two years or 40,000 Kms. Features and Advantages : Features Advantages High boiling point It is consistent and safe brake performance under high braking pressure

Brake Fluid DOT 3 is a excellent performance hydraulic brake fluid. It is use in automotive disc, drum and anti skid brake systems and clutch systems. Typical properties vary depending on the supplier of the fluid. Typical properties for brake fluids include: Density at 20º C, boiling point, wet boiling point, flash point and viscosity at 40º and 100º C. Applications : Brake fluid dot 3 is developed for use in applications where disc, drum and anti-skid braking systems are used in vehicles requiring DOT 3 level performance. Use only in its concentrated form out of a previously unopened or well sealed container. Seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this can reduce service life significantly. Do not reuse drained brake fluid. Brake fluid can affect the vehicle paintwork, so remove spills without rubbing. Brake fluid should be drained from the vehicle every two years or after 40,000 Kms.

Calcium Grease Multipurpose MP2 is a quality, smooth, calcium soap based grease and is fortified with the best known natural solid lubricant, graphite. Manufactured to NLGI 2 consistency, this grease gives the best combination of performance and economy for most applications. Calcium Grease is resistant to water and have excellent mechanical stability. The use of this grease will reduce wear through the use of the solid lubricant and gives extended lubricant coverage due to even distribution of the product along the wearing parts. Application : This grease is recommended for flexible couplings in various industrial applications where incidental water contact is high. Benefits : Keeps excellent shear stability under heavy duty service. Good water tolerance and is adaptable to normal grease dispensing systems including centralised lubrication systems.

ATF Dexron III is an automatic transmission and power steering fluid. It is recommended for use in General Motors automatic transmissions pre 2005 and in other automatic transmissions where Dexron (II or III) or Mercon performance is required. Applications : ATF Dexron III is recommended for many transmissions used in General Motors cars, Holden, Isuzu, Opel and Hydramatic transmissions used in a wide range of vehicles. It is also good for many earlier model Japanese vehicles where Dexron type fluids are recommended. It is recommended for other transmissions where Dexron and Dexron II fluids are specified except Mercedes Benz, ZF, BMW, Voith and Renk. Specifications : Dexron III H, IID and II. It can also good for use where the following performance levels are specified Holden HN 2126 Mazda M III Fluid Ford Mercon IV Allison C4 Ford M2C-138CJ GM Type A Suffix A

ATF Dexron I is a multi-vehicle, fully synthetic automatic transmission fluid that outperforms conventional automatic transmission fluids and offers exceptional thermal stability. ATF Dexron I is designed to meet the demanding requirements of modern passenger vehicles. Applications : ATF Dexron I is a multi vehicle formula developed for use in modern high performance automobiles, SUV’s, SUT’s, vans and other light trucks. It is recommended for use in applications requiring Dexron III , Ford Mercon and Mercon V performance levels This is developed for use in applications specifying the off highway power transmission requirements of Allison C-4. Specifications : ATF Dexron I meets the requirements of: JASO 1-A Ford Mercon V Features and Advantages : Features Advantages and Potential Benefits Enhanced, long-term frictional properties Improve and extend transmission efficiency, smooth shifting performance and fuel economy

Gear Oil 85W140 is high performance, heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected.It provide excellent performance where API GL-5 service is required. Applications : Heavy duty axles and final drives requiring API GL5 level performance Cars, on highway light and heavy duty trucks and commercial vehicles Off highway industries including: construction, mining, quarrying, and agriculture Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail Specifications : Gear Oil 80W140 meets the following industry specification: 80W140 API GL-5 X

Gear Oil 80W90 is high performance, heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. This lubricant is engineered for automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected.It provide excellent performance where API GL-5 service is required. Applications : Heavy duty axles and final drives requiring API GL5 level performance Cars, on highway light and heavy duty trucks and commercial vehicles Off highway industries including: construction, mining, quarrying, and agriculture Other heavy duty industrial and automotive applications involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque prevail Specifications : Gear Oil 80W90 meets the following industry specification: 80W-90 API GL-5 X

Gear Oil SAE 140 API GL-4 & GL-5 is a lubricating gear oil for mechanical transmissions based on high quality base oils and additives that are a balanced combination of active ingredients. Special high pressure agents and other additives offer excellent wear protection even under harsh operating conditions. Applications : Gear Oil SAE 140 API GL-4 & GL-5 is designed for use in highly loaded, hypoid gears and for use as an extreme pressure gear oil where this grade of lubricant is specified by the manufacturer. Specifications : API GL-5 API GL-4 MIL-L-2105D ZF TE-ML 05A CS 3000B Ford M2C-9002A Mack GO-G GM 1899M, GM 93740141, GM 93740140 Features and Advantages : Excellent adhesion and pressure resistant lubricating film Good oxidation stability Exceptional viscosity temperature behaviour Low pour point Good protection against rust and corrosion Increase wear-inhibiting effect

Gear Oil SAE 90 API GL-4 & GL-5 are lubricating gear oils for mechanical transmissions based on high quality base oils and additives that are a balanced combination of active ingredients. High pressure agents and other additives offer good wear protection under harsh operating conditions. Applications : API GL-5 API GL-4 Features and Advantages : Good thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission. Extra smooth gear shift due to reduced sludge build up and cleaner surface. Excellent corrosion protection for improved component life. Excellent antiwear and load carrying characteristics extend the life of components.Improved low temperature protection and gear shifts compared to monograde products. High compatibility with gaskets & seals, which protects component life. Specifications : Manual gear oil 90 exceeds the requirements of API GL 4 & GL 5, US MIL-L-2105.

Hydraulic Oil ISO 100 is good quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives good anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil ISO 100 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling,...

Hydraulic Oil 68 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil ISO 68 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment.

Hydraulic Oil ISO 46 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil 46 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided.Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment.

Hydraulic Oil 32 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil 32 is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided. Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment. This can cover decay baptize analysis plants, reservoirs, waterways, parkland, drilling,...

Hydraulic Oil is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters. A high-performance, carefully selected additive package gives excellent anti-wear and extreme pressure properties as well as good thermal stability and corrosion protection. Inherently strong oxidation resistance anticipate gumming and drop accumulation at top temperatures. Because of the high natural VI of the base fluid and low pour point, the viscosity temperature behavior allows for a very wide operating temperature range. Hydraulic Oil is recommended where there could be accidental fluid loss into the environment or where surface water contamination should be avoided. Application areas cover industrial, forestry and abyssal and decidedly in adaptable equipment.