Electric motors - Import export

Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

Electrical motors for wind turbine applications like specific Pitch motors and Yaw motors can be found in the category. Others searched wind turbine electrical motors for: Vestas - Neg Micon - De Wind - Lagerwey - Nordex - Fuhrlander - Gamesa - Bonus - GE - Siemens - Winergy

Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel drylin® E data sheet - Gearbox for stepper motors GEA-60-..._EN.pdf Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel

A citycoco is a cross between an electric scooter and an electric scooter. But the main feature of the citycoco is its big tyres. Our citycoco models are very varied in terms of motor power, battery power and product design! French legislation has determined that our electric scooters (citycocos) are considered to be 50 cm3. In fact, electric motors under 4000W fall into the regulatory category of mopeds.

We are the best source for ferrous scrap metal and non-ferrous scrap metals. With five recycling locations scattered around EU, and an active demolition and dismantling service we have a huge supply of scrap metal. In addition, we buy scrap metal from national and international customers and resell it to people just like you at affordable prices. As one of the largest scrap metal dealers in the EU, our business, for the past 40 years, has always focused on quality. So while we have a huge supply of scrap metal it is all graded and sorted according to the standards of the metal industry. What that means for you is that when you buy scrap metal you are not just buying a ton of copper, but a ton of copper that is sorted, process and rated according to the standards set forth by the metal industry. We accept a wide variety of ferrous and non-ferrous scrap and surplus metal products.

Used Electric Motor scrap, Fridge and AC Compressor Scrap, Aluminium Engine scrap, Lead Battery Scrap, Paper Scrap, etc; Drained Copper Compressor – Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Fridge/AC Compressor Scraps We sell Fridge/AC Compressor Scraps at a very competitive market price. detailed Specifications : Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details: 220-240 v 50 or 60 Hz. Cooling capacity: 90-190 w displ Size : 5.99 -12.53 cm3 Purity: 99.98% copper inside with connection box Aluminum Engine Block Scrap Pb (Min): 99% Alloy Or Not: Non-alloy Material: Lead Drained Used Electric Motor Scrap (RAINS per ISRI Specifications) Motor Scrap: 99.97 % Grade: A Type: All kinds of Motor Scrap Fe Content: HMS Fe Content (%): 100%)

2- and 4-poles 6-poles with fix hole distance 6-poles with variable hole distance 9-poles explosionproofed (Ex)

Large selection of tools for the production, repair and maintenance of electric motors

Devices and machines for dismantling and transport, for cleaning, for mounting or fixing aiming, for insulating, for winding, forming, ligaturing and closing, for stripping, for marking, for measuring and testing of electrical motors and for collector maintenance as well.

Rated voltage: 24 V DC Idling speed: 78 rpm Rated torque: 8 Nm Gearing: left side, bolt hole circle 72 mm, hole centre distance 62 mm Shaft diameter: 10 mm Shaft length: 43 mm Shaft round with groove (W278) Type: SWMV

SWF gear motor 404.319 Rated voltage: 24 V DC Idling speed: 70 rpm Rated torque: 3.3 Nm Gearing: right side, bolt hole circle 50.8 mm, hole centre distance 43.5 mm Shaft diameter: 10 mm Shaft length: 24 mm Round slotted shaft (W199) Type: SWMP

SWF gear motor 404.312 Operating voltage: 24 V DC Idle speed: 228 U / min Rated torque: 2 Nm Starting torque 35 Nm Gearing: right side, bolt hole circle 72 mm, hole centre distance 62 mm Shaft diameter: 10 mm, shaft attachment piece 12 mm Shaft length: 31 mm Round grooved shaft with interior thread M4 (W128) Type: SW2K

SWF gear motor 403.280 Rated voltage: 24 V DC Idling speed: 52 rpm Rated torque: 2 Nm Gearing: right side, bolt hole circle 84 mm Shaft diameter: 8 mm Shaft length: 22.5 mm Round shaft flattened on one side (W45) Type: SWMP No interference suppression, SWF403.280 with terminals for connector

Gear motor for Einhell Garage door drives 24 V DC is the same motor as 210251006 GT 52 GTA 150 GTA 360 TA 50 TAF 311 TAF 321 TAF 351 TAF 362 TAF 2000 VL 500 VTA 702 K VTA 702 Z

Gear motor NIDEC 404.682 for Sommer hinged gate operator TWIST 200, SWF 404682 Rated voltage: 22 - 24 V DC Idling speed: 40 rpm Rated torque: 4 Nm Gearing:hollow shaft KRC profile (W224) type: GMPD

Original SWF 404854 gear motor for Hörmann SupraMatic E, SupraMatic P, SupraMatic, ProMatic, ProMaticP, EcoMatic, EcoStar and RotaMatic. Does not fit SupraMatic H ! 2 - wire (green and brown) connecting cable is added, with 3 holes tapped PN = 54 W, IN = 6,0A, 24 V DC, rpm = 65 without load 1-channel Hall sensor type: DCK31 (W277)

With interuptor limit, clamping length 54mm and drive shaft guide 10 mm toothed cone and M8 Security for threads, 55mm center distance of axes Wiper motor without switch, with parking position Wiping angle: 90 ° Mounting arm wiper: cone M8 Engine mounting: M14x1mm Support: 57mm cone M8 Shaft length: 94mm Clamping length: 54mm max. Wiper arm / wiper blade: 650 mm

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

The synchronous servomotors of the series MN are brushless permanent magnet synchronous servomotors with sinusoidal back EMF and with neodym permanent magnets at the rotor. Therefore they are particulary suitable for high-quality servo applications, for example positioning demanding high standards of dynamics and accuracy. Standard configuration of the motors: 2-pole resolver feedback connectors, straight, 1" flange design B5 thermo protection PTC protection class IP65 plain shaft RAL 9005 Further options and equipment are available on request. Maybe options and non-standard equipment can have an effect on the dimensions of the motors. We therefore recommend to consult about it with us before ordering.

The synchronous servomotors of the series MT are brushless permanent magnet synchronous servomotors with sinusoidal back EMF and with neodym permanent magnets at the rotor. Therefore they are particulary suitable for high-quality servo applications, for example positioning demanding high standards of dynamics and accuracy. Standard configuration of the motors: 2-pole resolver feedback connectors, straight, 1" flange design B5 thermo protection PTC protection class IP65 plain shaft RAL 9005 Further options and equipment are available on request. Maybe options and non-standard equipment can have an effect on the dimensions of the motors. We therefore recommend to consult about it with us before ordering.

The Series MPM – That makes the difference: — Sustainable reduction of energy costs by efficieny IE4 — Highly efficient usage of material and resources — Reduced type number and lower motor weights — Constant torque covering the whole speed range — Better performance in part load operation — Innovative sensorless speed control# — Suitable for “frequency injection” — Free choice of frequency inverter The advanced motor design allows higher speed and torque in combination with a smaller motor design and lower losses. Even today the challenges of the future, for example efficency according IE5, are achieved. The syn-chronous motor technology in a classic standard motor housing fulfills the economic requirements and making it ideal for speed controlled operations or applications with high duty cycles and/or high partial loads.

The Series MPM – That makes the difference: — Sustainable reduction of energy costs by efficieny IE4 — Highly efficient usage of material and resources — Reduced type number and lower motor weights — Constant torque covering the whole speed range — Better performance in part load operation — Innovative sensorless speed control# — Suitable for “frequency injection” — Free choice of frequency inverter The advanced motor design allows higher speed and torque in combination with a smaller motor design and lower losses. Even today the challenges of the future, for example efficency according IE5, are achieved. The syn-chronous motor technology in a classic standard motor housing fulfills the economic requirements and making it ideal for speed controlled operations or applications with high duty cycles and/or high partial loads.

The Series MPM – That makes the difference: — Sustainable reduction of energy costs by efficieny IE4 — Highly efficient usage of material and resources — Reduced type number and lower motor weights — Constant torque covering the whole speed range — Better performance in part load operation — Innovative sensorless speed control# — Suitable for “frequency injection” — Free choice of frequency inverter The advanced motor design allows higher speed and torque in combination with a smaller motor design and lower losses. Even today the challenges of the future, for example efficency according IE5, are achieved. The syn-chronous motor technology in a classic standard motor housing fulfills the economic requirements and making it ideal for speed controlled operations or applications with high duty cycles and/or high partial loads.