Agents and additives - Import export

The Lindemann Oil Stop Leak contains an additional agent that returns rubber oil seals and o-rings and also plastic parts that have been ” hardened ” back to the original flexibility so that they regain their original function. This is not part of the Lindemann Worn Engine Treatment! This is also the difference between the two products

TECHNICAL PROPERTIES Primer filler for vertical surfaces or for use on ceilings made from poured concrete or pre-slabs. Decorating filler, for smoothing over. Smooth, matt finish. Odour-free. COMPOSITION AND APPEARANCE. Solvents : Water. Filler : Calcium carbonates. Additives : Dispersing agent, bactericidal fungicide. Thickeners : Cellulosic, polyacrylates. Binders : Acrylic dispersing agent. Density : 1.86. Dry matter : 75%. TECHNICAL PROPERTIES • Fire classification: A2-S1, d0 SUITABLE SURFACES Interior : ideal for covering bricks, brick tiles, cement breeze blocks, cinder blocks, de-bubbling pre-slabs, shuttered concrete, aerated concrete, for redecorating stippled walls or old damaged surfaces. APPLICATION. • The first coat should be levelled out using 60 cm scraper or skimmed with a rule. • After drying, the second coat should be smoothed with a scraper. • After allowing to set slightly, squeeze the filler at a slight angle using a clean scraper.

TECHNICAL DEFINITION SEMIN AIRLESS 3 IN 1 is an indoor filler that can be used as an Airless spray. It provides an even appeareance without smoothing, has great coverage and a deep matt finish. It combines 3 actions : underlayer, filler and finish. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivates, preservation agent and other additives. The resulting paste is a bright white colour and its consistency is adapted to its airless application. TECHNICAL CHARACTERISTICS • Dry extract : 68% • Density : 1,76 • COV : <1g/l APPLICATION SEMIN AIRLESSS 3 IN 1 can be sprayed with all kinds of Airless machines adapted to srpraying coatings. Recommended nozzle : 627. For optimum results, we recommend following this method : • Spray a first layer of the coating about 300 to 400 g/m2, to show up the defects on the surface. Spray at a distance of about 80 cm from the relevant surface • Check over the surface carrefully

TECHNICAL DEFINITION SEMIN AIRLESS COVER is an indoor coating that can be Airless sprayed. COMPOSITION AND APPEARANCE Acrylic emulsion resin, mineral content, cellulose derivatives, preservation agent and various additives. The resulting paste is white and its consistency is adapted to its airless application. ACCEPTED SUBSTRATES • Fair-faced concretes. • Plasters boards. • Old droplets • Porous concrete PACK SIZE 25 kg. Plastic bags and tubs. SUITABLE SURFACES The SEMIN AIRLESS GARNISSANT layer can be applied with the help of an acrylic or gloss paint. TECHNICAL CHARACTERISTICS • Dry extract : 72% • Density : 1;88 • COV : < 1g/ litre APPLICATION SEMIN AIRLESS covering layer is sprayed in two steps : the first must be smooth with the help of a 60 cm blade, after drying the second one must be smoothed with the blade. The product must be sprayed at about 80 cm from the support. TIP : Lift filters before spraying.

TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.

TECHNICAL DETAILS Paste coating for a good finish on interior walls and ceilings. Provides excellent surface preparation before painting or hanging coverings. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, rheological agent and various additives. SEMIN ENDUIT DE LISSAGE is a water-based coating. The paste is white in colour. COVERINGS • Wallpaper • Paint • Wall covering SUITABLE SURFACES Interior walls and ceilings • Plasterboards • Plaster tiles • Concrete • Cement coating TECHNICAL CHARACTERISTICS • Density of paste : 1.9 • Granulometry : fine • pH : 7 Adhesion : complies with NFT 30 608 PACK SIZE 4 and 10 kg buckets on shrink-wrapped pallet. APPLICATION Apply manually using a smoothing trowel or a filling knife. The maximum thickness will be 2 mm per coat. Allow to harden and remove imperfections before sanding, if necessary. Print the SEMIN ENDUIT DE LISSAGE if applying satin-finish or gloss paint. Clean tools in water.

TECHNICAL DEFINITION Ready mixed filler for interior and exterior finishing work on walls and ceilings OSCAR is a water based filler giving a finish identical to oil based products. COMPOSITION AND APPEARANCE Resin emulsion containing calcium carbonate, rheological agent and various additives. The resulting paste is white. ACCEPTED SUBSTRATES Interior walls and ceilings • Plasterboard • Old paint • Plaster blocks • Primers Outside walls • Smooth concrete • Fine floated cement SUITABLE SURFACES • Wallpaper • Paint • Wall coverings • Thick plastic covering (RPE) TECHNICAL CHARACTERISTICS • Paste density : 1.9 • Particle size : very fine • pH : 7 APPLICATION Application is manual using a float or a painter’s knife. The maximum thickness will be 1 mm per coat. Smooth and sand if necessary before OSCAR has entirely set. Clean tools with water.

TECHNICAL DEFINITION Ready-to-use coating paste for smoothing irregular surfaces on interior and exterior walls. Particularly suitable for damp areas. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, water, rheological agent and various additives. The paste is off-white in colour. SUITABLE SURFACES • Plasterboard panels • Plaster blocks • Ceramic tiles • Concrete • Cement coating • Rpe • Old paint • Glass web fabric • Sanded and printed wood SUITABLE SURFACES Plaster-based top coat. Paste coating. Matte paint. TECHNICAL CHARACTERISTICS • Granulometry : up to 0.6 mm • Adherence : complies with NFT 30 608 • pH : neutral • Dry extract : 80% STORAGE 6 months in unopened original packaging, away from frost and extreme heat. CLASSIFICATION AFNOR NFT 36.005. FAMILY IV - CLASS 4 B. COMPLIES WITH DTU 42.1. PREPARATION OF SURFACES Surfaces must comply with standard DTU 59.1, and be clean, dry and free from dust and any trace of separating agent.

TECHNICAL DEFINITION Extra-fine finishing filler in powder form for all types of interior jobs. The substrate is now ready to be decorated with paint, wallpaper or any wall covering. COMPOSITION AND APPEARANCE Calcium carbonate, redispersible resin, rheological agent and various additives. Produces a white paste. SUITABLE SURFACES • Wallpaper • paint • wall covering • Plasterboards • Concrete • Old paint • Plaster-based high build filler • Plaster blocks • Cement render • Undercoat TECHNICAL CHARACTERISTICS • Setting time : >24hrs (drying filler) • Powder’s density : 0.8 • Grain size : very fine • pH : 7 • Adhesion : complies with standard NFT 30 608 MIXING FACTOR Use approximately 11-12 litres of water for one 25 kg bag. Allow the paste to rest for 15 min before use. APPLICATION Apply either manually with a steel trowel or a putty knife, or mechanically. Allow to harden and scrape off any possible imperfection before sanding down.

TECHNICAL DEFINITION Ultra-light ready mixed filler for repair of interior or exterior walls and ceilings. Shrink free and fast drying, SEM-LIGHT is ideal for high quality filling jobs and is very ease to use. COMPOSITION AND APPEARANCE Resins in emulsion with lightening agents and various additives. The paste is snow white. ACCEPTED SUBSTRATES Interior and exterior walls and ceilings • Plaster • Masonry • Cellular concrete • Concrete • Plasterboard • Roughcast • Wood • Cement render TECHNICAL CHARACTERISTICS • Density : 0.4 • pH : 7 • Shrink-free filling • Excellent application qualities STORAGE 12 months in unopened original packing protected from frost and extreme heat. PREPARATION OF SURFACES BEFORE APPLICATION The substrates must be clean, free of dust and any trace of formwork release oil. Indoors, during hot weather or on absorbent substrates the surfaces may be dampened slightly. Cracks should be opened up before application.

ALMAQ is a formulation that stimulates plants to develop endogenous defense mechanisms, making them more resistant to biotic and abiotic stresses. Due to the presence of nitrogen and phosphorous, the product prevents and cares nutritional deficiencies and reinforces the tissues which will be more resistant to physical and mechanical stress agents. In addition, specific plant extracts stimulate the plants to produce phytoalessine, which are natural endogenous substances that create unfavorable conditions to fungine and bacteria. The formulation is particularly recommended for vine crops.

SAWDUST AND BARK BRIQUETTES OF RUF TYPE “Night” briquettes made of Bark The type “Night”, which is composed of 98% bark and burns in about 6-8 hours. Bark Briquettes are made from spruce or pine tree bark. The tree barks are shredded and dried at a high temperature of above 700 deg. C. Rectangular shaped briquettes are formed under high pressure of more than 250 Bar. As no biding agents, additives or glue are used during that process, Bark briquettes are natural and renewable bio fuel with unique properties of up to 8 hours burn time and keeping heat up to 14hours.

Gear Oil SAE 140 API GL-4 &amp; GL-5 is a lubricating gear oil for mechanical transmissions based on high quality base oils and additives that are a balanced combination of active ingredients. Special high pressure agents and other additives offer excellent wear protection even under harsh operating conditions. Applications : Gear Oil SAE 140 API GL-4 &amp; GL-5 is designed for use in highly loaded, hypoid gears and for use as an extreme pressure gear oil where this grade of lubricant is specified by the manufacturer. Specifications : API GL-5 API GL-4 MIL-L-2105D ZF TE-ML 05A CS 3000B Ford M2C-9002A Mack GO-G GM 1899M, GM 93740141, GM 93740140 Features and Advantages : Excellent adhesion and pressure resistant lubricating film Good oxidation stability Exceptional viscosity temperature behaviour Low pour point Good protection against rust and corrosion Increase wear-inhibiting effect

Gear Oil SAE 90 API GL-4 &amp; GL-5 are lubricating gear oils for mechanical transmissions based on high quality base oils and additives that are a balanced combination of active ingredients. High pressure agents and other additives offer good wear protection under harsh operating conditions. Applications : API GL-5 API GL-4 Features and Advantages : Good thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission. Extra smooth gear shift due to reduced sludge build up and cleaner surface. Excellent corrosion protection for improved component life. Excellent antiwear and load carrying characteristics extend the life of components.Improved low temperature protection and gear shifts compared to monograde products. High compatibility with gaskets &amp; seals, which protects component life. Specifications : Manual gear oil 90 exceeds the requirements of API GL 4 &amp; GL 5, US MIL-L-2105.

AGRANA’s starch products are used in the textile industry as sizing agents, adhesives for textile webs, textile print thickeners and in digital printing applications. They are ideally compatible with additional finishing agents such as optical bleaching agents, filling agents, synthetic resins and dispersion agents.

Eco-friendly ester-based cleaner designed to remove bitumen, tar, grease, oil stains. An agent based on vegetable hydrocarbons with additives that make it easier to wash stains from the cleaned surface. CLEAN-BIT ECO is used to remove dirt from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. Does not cause corrosion of cleaned metal surfaces CLEAN-BIT ECO deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure. •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth.Gently wipedirty surface.For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. Wipe off the stains with a microfiber cloth.

This grease is formulated with highly refined mineral oil and thickened with lithium soap (hydroxystearate). It is further enhanced with antioxidants, anticorrosive agents, and adherence additives. A versatile grease suitable for general-purpose lubrication in various industries, as well as automotive applications including chassis, wheel axles, railways, and public works machinery. Effective within a temperature range from -10°C to 120°C, making it adaptable to a wide range of operating conditions

It is important to make all arrangements in time before goods are shipped as delays with clearance can add significant storage cost. Goods arriving to airports are subject to handling fees by commercial handling agents and additional daily storage rates are incurred starting after 24 hours of goods being checked in.

Ingredients: fast-frozen wild red bilberry and cranberry, grown without chemical fertilizers and pesticides. It has no preservation agents and artificial additives. Organic. Ready-prepared product. Defrost at room temperature before eating fresh. Refreezing is not allowed. Net weight: 300 g Nutrition facts per 100g: proteins – 0.5g, carbohydrates — 10g, fats – 0g Energy density per 100g: 190kJ / 45 kcal Store at temperature minus 15–18 ºС, relative humidity 95%. Shelf life: 18 months from the date of manufacture. Date of manufacture is specified on the package.

Ingredients: cherry, sugar, thickening agents – pectin. It has no preservation agents and artificial additives. Nutrition facts per 100g: carbohydrates 45g. Energy density per 100g (energy content): 770 kJ/180 kcal. Store out of direct sunlight, at temperature from 0 to +250С and relative humidity not more than 75%. During the first opening, a pat should be distinctly audible; after opening, store the jam in the refrigerator not longer than for 5 days. . Shelf life is 12 months from the date of manufacture. STO 00493534-033-2014 Date of manufacture is specified on the label

Ingredients: red currant (60%), sugar, thickening agents – pectin. It has no preservation agents and artificial additives. Nutrition facts per 100g: carbohydrates 45g. Energy density per 100g (energy content): 770 kJ/180 kcal. Store out of direct sunlight, at temperature from 0 to +250С and relative humidity not more than 75%. During the first opening, a pat should be distinctly audible; after opening, store the jam in the refrigerator not longer than for 5 days. . Shelf life is 12 months from the date of manufacture. STO 00493534-033-2014 Date of manufacture is specified on the label

Ingredients: black currant (60%), sugar, thickening agents – pectin. It has no preservation agents and artificial additives. Nutrition facts per 100g: carbohydrates 45g. Energy density per 100g (energy content): 770 kJ/180 kcal. Store out of direct sunlight, at temperature from 0 to +250С and relative humidity not more than 75%. During the first opening, a pat should be distinctly audible; after opening, store the jam in the refrigerator not longer than for 5 days. . Shelf life is 12 months from the date of manufacture.

The product is pasteurized. Ingredients: Directly squeezed WILD CRANBERRY juice 19%, sweeting agent – organic agave syrup, water. Without preservation agents and artificial additives. Store out of direct sunlight, at temperature from +2°С to +25°С and relative humidity not more than 75%. When storing, natural sediment in the form of pulp particles is permitted. Shake well before drinking. After opening store not longer than for a day at temperature from +2°С to +6°С. Shelf life is 24 months from date of manufacture, specified at the bottom of the label. STO 65532222–007–2021

The product is pasteurized. Ingredients: DIRECTLY SQUEEZED WILD LINGONBERRY JUICE 19%, sweeting agent – organic agave syrup, water. Without preservation agents and artificial additives. Store out of direct sunlight, at temperature from +2°С to +25°С and relative humidity not more than 75%. When storing, natural sediment in the form of pulp particles is permitted. Shake well before drinking. After opening store not longer than for a day at temperature from +2°С to +6°С Shelf life is 24 months from date of manufacture, specified at the bottom of the label. STO 65532222–007–2021

The product is pasteurized. Ingredients: DIRECTLY SQUEEZED BILEBERRY JUICE 40%, sweeting agent – organic agave syrup, water. SUGAR-FREE. Without preservation agents and artificial additives. Store out of direct sunlight, at temperature from +2°С to +25°С and relative humidity not more than 75%. When storing, natural sediment in the form of pulp particles is permitted. Shake well before drinking. AFTER OPENING, STORE NOT LONGER THAN FOR A DAY at temperature from +2°С to +6°С. SHELF LIFE IS 24 MONTHS from date of manufacture, specified at the bottom of the label. STO 65532222–007–2021

The product is pasteurized. Ingredients: Directly squeezed WILD SEA BUCKTHORN juice 19%, sweeting agent – organic agave syrup, water. Without preservation agents and artificial additives. Store out of direct sunlight, at temperature from +2°С to +25°С and relative humidity not more than 75%. When storing, natural sediment in the form of pulp particles and the oily ring of sea buckthorn oil on the bottle neck is permitted. Shake well before drinking. After opening store not longer than for a day at temperature from +2°С to +6°С. Shelf life is 24 months from date of manufacture, specified at the bottom of the label. STO 65532222–007–2021

Antibacterial wipes with a cotton-containing nonwoven. Impregnated with a special formula with alcohol denat. and an additional antibacterial agent. Kill bacteria and act effectively against H1N1 virus (tested in Pasteur Institute). With clinically proven action. Tested in compliance with the European Standards ΕΝ 1650, ΕΝ 1276, ΕΝ 1040, ΕΝ 14476, EN 1499.

Antifogging agents prevent the formation of condensation drops on plastic film. Condensation drops are undesirable on food packaging because they mar the package imaging and the packaged item is not clearly visible. In greenhouse film they prevent condensation from dripping, which results in brown spots caused by the concentration of light. In antifogging agents, special additives are worked into the polymer which migrate to the surface and minimize surface tension.

Organic Certified Açaí Pulp Oil is obtained from direct processing of the fruit, centrifugation and filtration. No added agents, reagents, additives or other chemicals products. Benefits: * Maintains the skin balance * Stimulates the metabolism of cells * Reduces inflammation. * Prevents cardiovascular diseases Common uses: Anti-aging cosmetic formulations and formulas to relieve irritation and redness. Used to moisturize, protect and fortify skin as well as improving its elasticity. It can also be used for food such as salads and pasta.