Anti-static brushes - Import export

Anti Static Strip Brush

Anti static filaments are available in most diameters.

Vario Brush: The GREEN CLEAN – VARIO BRUSH (Goat hair) is particularly soft and adjustable in two positions. Position one: 19 mm = firm Position two: 34 mm = soft Anti-static effect the brush is retractable and therefore protected inside the handle. The brush is retractable and therefore protected inside the handle. Washable with baby shampoo and lukewarm water. Der GREEN CLEAN – VARIO BRUSH for: PHOTO – LENS – VIDEO – DIGITAL – COMPUTER – LAPTOP – AUDIO – HOBBY

Green Clean – Cleaning Kit for: FOTO – LENS – VIDEO – DIGITAL – COMPUTER – LAPTOP – AUDIO – HOBBY easy for travelling multi purpose use long lasting anti static Blue Booster: The GREEN CLEAN – BLUE BOOSTER for extra strong air flow! It removes dust particles from all surfaces such as lenses and more. Vario Brush: The GREEN CLEAN – VARIO BRUSH (Goat hair) is particularly soft and adjustable in two positions. Position one: 19 mm = firm Position two: 34 mm = soft Anti-static effect the brush is retractable and therefore protected inside the handle. The brush is retractable and therefore protected inside the handle. Washable with baby shampoo and lukewarm water. Optic Fluid: The GREEN CLEAN – OPTIC FLUID (30ml) is for excellent and effective cleaning, without any alcohol or aggressive agents that could dissolve materials. Biologically safe. Silky Wipe: The GREEN CLEAN – SILKY WIPE is made from particularly flat, tightly spun silk-derivate and contains no chemicals, binding...

BASED ON POLYIMIDE FILM COATED WITH A SPECIAL SURFACE CONDUCTIVE ADHESIVE. STATIC GENERATION DURING ROLL UNWIND AND TAPE APPLICATION IS ELIMINATED. IT CAN WITHSTAND WAVE SOLDER TEMPERATURES UP TO 300C AND LEAVES NO ADHESIVE RESIDUE ON PRINTED CIRCUIT BOARDS UPON REMOVAL.

MEJ anti-static bars are often used on production machines were short range ionisation is possible and where no moving machine parts are interfering the ionisation.The properties of this Simco-Ion anti-static bar are the same as those of type MEB, except that the MEJ type is round. Therefore mounting this anti-static bar via holes in the machine frame is possible. - Short working distance: 30 mm - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Round bar, can be easily mounted via holes in the machine frame

MEB anti-static bars are often used on production machines were short range ionisation is possible and where no moving machine parts are interfering the ionisation. Each individual emitter point of this rectangular anti-static bar is coupled capacitively to the high voltage. You will there fore not get an electrical shock when the point is accidentally touched. Another advantage is that the bar continues to function properly when a number of points are short-circuited, for instance due to heavy fouling. Features - Short working distance: 30 mm - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Compact - Complementary equipment: A2A7S/MPM

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and the Pinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 3 - Dimensions: Length 158 x Height 35 x Ø 20 mm

The ThunderION IQ 2.0 is a high quality and most powerfull anti-static bar for the Industry. The static eliminator has a long reinforced extruded profile body that provides for easy and sturdy mounting. Due to the strength of the bar sizes up to more than 5 meter can be delivered. Mounting the anti-static bar could be realised with a few mounting screws. The bar has an integrated 24v power supply with a rugged industrial M8 connection. The very effective bar makes discharging of high static charges distance more than 1 meter possible, even in high-speed production applications up to 1000m/s. The bar is complete shockless so touching the Tungsten(Wolfram) pins is completely safe. The bar functions completely stand-alone and can for future demands be connected to external sensors and monitoring systems to create a full close loop feedback system. Function control of the bar is done by means of high-power LED to make check-up of the functionality of the bar an easy job.

CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60. For basic users a quick set-up menu is provided to set-up the generator to function as an ECM30/60. The Menu is available in English, German, French and Italian. The new standard function Current Control will enable you to set a constant current vs a constant voltage. This will provide a much more stable charging and will compensate contamination and emitter pin wear automatically. Advanced Current Control is a revolutionary new feature. The generator keeps track of the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level. This prevents sparkover and emitter pin wear. When material is reinserted the current will switch back to the high level current. A serial bus interface can be fitted additionally to enable the generator to communicate through serial bus interfaces s.a. Profibus or CANopen (Other serial protocol available on request).

Performax Easy Ex: for explosion hazardous environments Compact high efficient static neutralising for explosion hazardous environments . The Performax Easy Ex has an integrated high voltage power supply and requires only a low voltage input of 24V DC. A two color high bright LED visualises bar ON (green) or bar FAULT (red). On the standard connection cable an additional wires for remote on/off contact is available and a signal indicating high voltage O.K. The Performax Easy Ex bar has light slanted ends and protection classification IP66 which allows easy cleaning. The aluminum profile offers a very rugged structure even up to 3 meters. Universal mounting brackets are supplied for various mounting options.

A compact high voltage supply with an adjustable output voltage of 0 - 20 kV (with a maximum current of 0,7 mA) clearly shown on the digital display. State-of-the art electronics are employed with a remote control option. The power supply is available with a positive or negative output voltage. A warning lamp lights up if the system is overloaded or in the event of spark-over. Features - Output voltage of 0 – 20 kV - Available with a positive or negative output voltage - Remote control is possible - A warning lamp lights up if the system is overloaded or in the event of spark-over - 180 ° reversible control panel equipped with membrane switches

Each individual emitter pin of this anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. Another advantage is that the bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. Features - Medium working distance: 150 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling.

The HDR charging bar suits high velocity applications. Each individual point being fitted with a resistor, so the chance of spark-over is strongly reduced. features - Charging bar - Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV - Suits high velocity applications - Chance of spark-over is strongly reduced

This type of anti-static bar, a more powerful version of the EP-Sh-N is highly effective and, with its long range, ideal for neutralization of static electricity on materials when the distance varies. Under certain conditions the maximum distance may even be as large as 600 mm. The construction of the bar is so rigid that bending of long bars is only minimal. Features - Long working distance: 600 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Ideal for neutralisation of static electricity on materials when the distance varies.

This anti-static bar has the same properties as the P-Sh-N. but is equipped with an integrated power unit, you do not need a high-voltage cable. This anti-static bar has been approved for use in certain hazardous environments. The 5m long primary cable shall be connected to the mains voltage. A neon lamp can indicate that high voltage is present. Under certain conditions the P-Sh-N-Ex bar is capable of neutralizing the materials from a maximum distance of 200 mm. Features - Short working distance: 200 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Ideal for neutralisation of static electricity on materials when the distance varies. - Approved for use in certain explosion hazardous environments

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and thePinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 5 - Dimensions: Length 166 x Ø 20 mm

Each individual emitter pin of the MaxION anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. The rugged MaxION static neutralising bar has a reinforced profile that minimises damage due to accidental bending. The ground reference is embedded in the reinforced profile. The slide slot on the backside of the MaxION enables the user to position the mounting bolts as required, allowing greater mounting flexibility. After cleaning the precision emitter pins with a brush you can sweep the contaminants out of each light-angled end of the bar easily. Features - Medium working distance: 400 mm max. - Minimal risk of deflection and deformation of the anti-static bar due to glassfiber reinforced plastic profile - Shockless touchable emitters - Compact

The tube diameter is adjusted to the existing tube system. And so is the number of integrated anti-static bars, based on the diameter. Simco-Ion anti-static bars can also be integrated in a tube provided by the client. The anti-static bars are arranged in two series. They are connected to a two-phase power unit to ensure optimal ionisation at high velocities. Features - Custom size pipe - Optimal ionisation at high velocities - Can be integrated in a tube provided by the client

The emitter pins of the Super Service anti-static bars are directly coupled to the high voltage so that maximum ionising current is reached. These bars can be cleaned easily and therefore they are suited for being installed in places which may be subject to heavy fouling. Touching an emitter pin will cause an unpleasant electrical shock. These bars are usually installed in such a manner that the emitter pins cannot be touched by personnel. Features - Short working distance: 30 mm max. - Optimal neutralisation because the emitter pins are directly coupled to the high voltage - Is suited for being installed in places which may be subject to heavy fouling - Non-touch-safe emitters - Heat and chemical resistant - Compact