Axles- vehicle - Import export

wheel axle for conveyor belt manufactured by CNC turning one end - external threaded, M8 the other end – internal threaded, M8 hex incircle diameter 17 mm length: 52 mm weight: 70 g material: carbon structural steel: ISO Fe360A / DIN RSt37-2 surface finish: black oxide coating Soochow Advance Industries Co., Ltd., (www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Development of rotating components require intensive testing. While the main goal may be reaching durability and life targets,noise , vibration, temperature and other parameters may play an important role for the customer expectations. Therefore, Novosim offers a customizable testing dynamometer which may be used to in the product development of passenger, commercial, heavy duty or even military vehicle components. Software is easy to use and also highly customizable allowing different product lines to be tested under a single system. With the help of regenerative braking, electricity is recovered and loops back to the test system providing efficient operation. Assuming the tests may run about 1 month, the consumption can be an important parameter for cost control. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process. System automatically generates a report which is also customizable.

This system is very valuable for testing the durability and expected life of the transmissions, axles, gears, transfer cases and shafts under various scenarios. It is hard to do vehicle level durability tests and without the need of getting the vehicle on the road for replicating claims caused by the powertrain, such type of a custom system help replicate the driving conditions where problems occur and the engineering team can develop a solution and iterate on the bench. Easy to use user interface; simplicity in get the system running in a target time is our most important goal. Operators in a test center can quickly receive training and begin running a variety of scenarios. Data from low speed channels such as sensors including thermocouples, RTD temperature sensors, pressure sensors and others can be collected whereas data from fast channels such as acceleration or microphone are collected through data collection (DAQ) systems, depending on the customer's preference.

In our range of fasteners and axles you will find quick-release axles, quick-release axles, indexing pins, pull-catches, clamping levers, clamping levers, wing screws, star handles and hand screws in various sizes and designs. In addition to our standard range, we also manufacture customised products or adapt our existing products with our many years of know-how in the industry, not only according to the wishes of our customers, but also according to the latest European norms and quality standards. Do you have any questions about our products or would you like to request a quotation? Just contact us. We have the right fastening for almost every application!

Production or overhauling of wheelsets for railway industry

End spring legs are made of cast and are sealed with plate fins on both sides. Fertilizer and seed pass the hose between flaps and lays on the soil. Because resultant force forces the leg to come out of the soil due to wide penetration angle, sowing depth can be increased with additional loads. This feature shows superiority over other types of legs. Good seed bed is prepared. Disc and spring-type chisel legs when faced with obstacles such as stone clod, tries to get up, but the axe is mounted to the chassis, leg movement does not come up. Should be replaced when axe is worn.

It is used for loading and unloading cotton bales.

The log holder attachment differs for different materials.

10000 Kg Capacity, 2 Axle, 2 Addition Trailer AOT 505 D Double add-on trailer is manufactured with double axles and tipping back the sheet metal frame. The trailer is produced in two types, lift in the middle and lift in the end. Trailer axles are closed hub system and do not require lubrication for many years. The trailer is connected to the tractor from behind and pulled with the appropriate speed limit.

Forklift Fork is 2 Models; 1. Adjustable Fork Fixed Model: Fork spaces can be manually narrowed and opened to fit under pallet space. 2. Adjustable Fork Sliding Loading Model: As in the 1st model, the fork gaps can be narrowed and opened manually to fit the under-pallet space, and different loads can be shifted 9 cm to the left - 9 cm to the right by a lift.

It is specially produced for high stacking of square type bales between 250 and 500 kg. Together with the front loader, the skewer tip can stack up to 560 cm high.

Together with the tractor front loader, it provides convenience in loading beets to a height of 450 cm.

The front loader grain bucket is produced in 180 cm, 200 cm and 220 cm dimensions.

The front loader soil bucket is produced in 160 cm, 180 cm and 200 cm dimensions. It is an excellent helper.

It is a type of multi-purpose collapsible bucket, also called combi - wolf mouth. It is used in works such as driving, loading and unloading.

It is used to transport roll bales such as corn silage bale, alfalfa bale, sugar beet pulp bale covered with stretch film. It can hold bales from both flat and round surfaces. Thanks to its wing structure, it does not deform in the stretch film.

Through its folding design and hydraulic scraper, it provides a great deal of convenience in stripping manure, laying manure on the soil, loading soil, fertilizer and forage. Due to the small footprint behind the tractor, it provides easy maneuverability in animal shelters.

Trailed type offset disc harrows with hydraulic lift are trailed type machines used for cutting and shredding plant residues (corn, sunflower, wheat, etc.) and weeds and breaking the duff layer after harvest. These machines prepare the field for direct sowing without using another agricultural machine by cultivating the soil without clods in the dry months when the plows cannot be used after the harvest. Model KTGD type offset disc harrows prevent wind and water erosion while disrupting stubble.

Tine harrow is used for breaking up the clods formed during the plowing process on the plow, collecting weeds and arranging the surface of the field during the preparation of the field for planting.

Casting rollers have an important place in seedbed preparation. They compress the top layer of the soil at approximate planting depth by keeping the moisture, as well as allowing the underlying moisture, which cannot used by the plants, to rise up. By this way, the seeds make better contact with the soil and germinate easily. Breaking and breaking the clods on the soil surface and smoothing the surface before planting ensures that the sowing machine works easily without clogging.

Removes weeds in the field. Levels the farm surface. It can easily operate even in extremely weedy farmlands. It can easily operate in the farms with deep tracks. It is used for stubble-ploughing and fallowing. Light-type cultivators are used for preparing seed beds. Cultivators are mostly used jointly with rollers in tool combinations while they can also be used solely.

This chisel can be used for cultivating soil without needing any plough in the farm after harvest. Due to the structure of its legs, the plough crushes the lower layer and it is a suspension machine cultivating low-clod soil in arid summer months when ploughing cannot be performed. It is possible to perform deep soil cultivation through the chisel.