Cable and wire cutters - Import export

The powerful "universal cutting machine" with superior pulling and cutting strength. The contact pressure between the conveyor belts is pneumatically controlled and opens and closes automatically when the cover is opened and closed. Ideal for solid and dimensionally stable materials. Metzner also offers the Variocut in three “Red – Green – Blue" equipment lines. Each equipment variant is based on the same basic model with the same high-quality mechanical components. The individual models differ in speed, control and the interfaces for peripherals.

Electrical cabinets contain the electrical and electronic components of a process engineering system, a machine tool, or production equipment that is not directly located in the machine. They are manufactured by special switch cabinet builders or by the machine manufacturers themselves. To save costs, there are automation solutions that are not only worthwhile for large production series, but are also suitable for the more efficient and economical production of individual and small series. Metzner offers a unique and comprehensive system solution to reduce your expenses in switchgear construction. Depending on your requirements, different stripping and crimping machines are available, which differ in terms of design, performance and degree of automation. METZNER TRIATHLON SERIES - for precise cutting to length and one- or two-sided stripping - for crimping the ferrules (single- and double-sided) - for individual labelling of strands with different printing method

The Metzner AM 5000 range includes the flagship models for precise processing of thick cables up to 240 mm² section and 35 mm diameter. Even the basic specification models, with their high torque and powerful three-stage step motors offer the highest level of cutting and haul-off power. All models are equipped with as standard with the Metzner double-knife system that enables very varied and multi-stage processes to be performed. Moreover, with convincing operator-friendliness and long service life. Metzner AM 5000 models are also suited to processing thinner braided cables from 1.5 mm² The stripping full haul-off 1side/2nd side amount to 270-450 mm and 90-270 mm, for partial haul-off 450 mm and 270 mm. For interuption-free automatic production, a number of sensors monitor the material feeding If a material blockage occurs, the production stops automatically and the operator is informed about the cause of the fault.

The cable processing machines in the AM 3800 range are characterised by their outstanding cutting and haul-off power and their modular, robust and long-life construction for continuous use in industrial applications. These machines outstandingly combine power and versatility. Equipped with cutting power for cables up to 70 mm sectionand 20 mm diameter, they are the ideal solution for an unusually wide spectrum of applications. Depending o the processing demands, numerous knife contours and technologies are available: the patented double-knife system allows different processes to be performed in a single working pass. The circumferential rotary cut offers an exact cutting round cables with very thin or tough insulation outer cover.

Metzner has developed a fully automatic processing machine with outstanding cutting quality and great length accuracy for steel cable wires of up to 20 mm diameter. The steel cable wires are fed by a motorised feeding device in combination with a contact-free loop control. Then, program-controlled and positionally accurate marking tapes are applied to the steel cable – with a cycle time of less than two seconds. In addition, a wax printer marks all the fastening and processing points that will be required for subsequent processing. This labelling method is carried out in a continuous process. The cut is then made using a special cutting process. Precise length accuracy is achieved by a special laser measuring system. A material stacker with a storage area of up to 12 metres ensures that the steel cable wires are deposited in an orderly manner. All cut steel rope can be stored and sorted according to length to allow it to be removed at a later point.

This special Metzner development is able to process cable wires with a diameter of up to 28 mm. The cycle time for this is 2000 mm / 35 seconds. The processing steps include long slitting, sawing, circumferential cutting, stripping, brushing and depositing. An integrated ink jet printer labels the cable wires with information or markings. As the heart of the processing method, Metzner uses a newly developed stripping head that combines a rotary cut with a powerful clamping and simultaneous rotation of the material. This enables a high-precision, multi-stage radial cut through the various layers of material. Microscopic quality inspection confirms that the processing is flawless with no scratches, pressure or abrasion marks. In addition to the high machining quality, the machinery also offers special precision: both the overall length and the machining position are maintained with an accuracy of 0.2 mm. The machine can process cable wires with diameters up to 28 mm.

The specially developed production line can unwind, label, roughen, cut to length, strip, wind, bind and automatically deposit the cable wires. The material to be processed is unwound by a motorised unwinder and fed to a thermal transfer printer via a straightener. The latter prints the cable with two QR codes and a serial number. This ensures that each cable can be identified throughout the entire processing and manufacturing process and assigned to the stations which have already passed through. This traceability offers great advantages – for example in the diagnosis of faults. The cable then passes through a roughening station, which lightly roughens the material surface so that the connector overmoulding adheres better later on. An AM 3550 from Metzner Maschinenbau cuts to length and strips the cable, which is then transported to the winding station and onwards by a gripper to the binding machine. The latter winds the cable to form a cable ring.

Plastic-coated steel cablestrands are cut to length using a special shear cut module and then stripped with the cutting module of the AM3500 without the wires "jumping open".Bare steel cable wires are transported by the modified AM 3500 directly to the special cutting machine, which is coupled between the AM 3500 and the material stacker and which cuts the material to length by a thermal process. Due to the special electric welding process used here, the individual wires do not twist up during cutting, and a smooth rope start and a smooth rope end without thickening are produced. Long steel cable wires/strands are placed in a tray after processing, while short pieces of material fall down a chute into a collecting container. With the high-performance solution developed by Metzner, the customer can process different types of material in different processes. Further advantages of the machinery are high precision, high quality, an increase in productivity and lower personnel costs.

The Super Stripper 600 (SS600), strips cable from 50mm –150mm: - Steel Wired Armoured cable (SWA) - Double Steel Wired Armoured cable (DSWA) - Lead Covered cable - Rubber - Nylon - Steel Tape Length: 1700mm Width: 1200mmHeight: 1800mm Weight: 1800kgMotor: 5.5 k.w Main motor 3phase Cutting Speed: Approx 6 Meters per minute

The Super Stripper 60 (SS60), strips cable from 1mm – 30 / 50mm with bespoke plate: - Steel Wired Armour (SWA) - Twin and Earth - PVC Wired Armour - Singles - PVC - Quadrant Copper cores Length: 500mm Width: 500mm Height: 560mm Weight: 60kg Cutting Speed: Approx 26 Meters per minute. Available in Single or 3 Phase

Cable Cutters Wire Rope Cutters Rebar Cutters Steel Cutters Chain Cutters Chain Blasters Cutter for Wire of Prestressed Concrete Flat Bar Cutters Thread Cutters Nut Splitters Nibblers for Sheet Metal Cable Stripping Tools Sheat Peeling Tools

NSPV Multi-function solar cable stripper for stripping 2.5/4/6mm2 cables

Hand operated hydraulic cable cutter supplied with canvas carry bag. Cutting of piano wire is prohibited. Cutting capacity. Wire rope 6х7:18 mm Wire rope 6х12:24 mm Wire rope 6х19:24 mm Soft steel bar:20 mm Reinforcing rod:16 mm Cu strands:24 mm Al strands:24 mm ACSR : 24 mm Guy wire 1х7:20 mm Guy wire 1х19:20 mm CCP cable:N/A

PVC-Control cables are used in tool-machines, conveyor belts, production lines in machinery production, in air-conditioning and in steel production. They are used for installing in dry, moist and wet rooms, specially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements.

Cable wire for overhead power lines according to EN 50189 - IEC 888 - ASTM B 498 SS4240805 - NFC 34-113

(1.370 N/mm2 outside wires and 1.770 N/mm2 inside wires)

(1.370 N/mm2 outside wires and 1.770 N/mm2 inside wires)

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

By means of a hinge, the edge protector SKD can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.

Black Unsintered Extruded PTFE Film is engineered with a carbon based PTFE filler to enhance conductivity and facilitate the dissipation of static electricity. It can be used for shielding high temperature wires and cables, wall construction of convoluted hose or when carbon black offers color advantages over other black pigments. Physical properties and conductivity are maximized after sintering. Features/Benefits • Enhanced Conductivity • Outstanding heat and chemical resistance • RoHS and REACH compliant Applications • High temperature wire and cable • Convoluted hose

Long service life, silicone rubber cold shrinkable cable accessories of natural aging resistance is very strong, therefore, its natural service life is also very long. The installation process is simple. It has a wide range of applications.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds of all types but for grounds subject to cryogenic deformations, in cable ducts, bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses, as well as winding, connecting and attaching to external load bearing power elements (ropes, wires, etc.) at points with a maximum electric field potential up to 12 kV.

We supply all kinds of Iron,Aluminum,copper,Brass,Plastics ,Computer Scrap and Rubber as well, Our product is high in demand due to their premium quality, clean and neat products at affordable prices.We also ensure to timely deliver these products to our clients,to their nearest location or warehouse directly if required.Visit our website or contact us for more information

Main products: Electrical round copper wire Product characteristics: Bright and burr-free surface; superior performance quality; Can meet the technical requirements for drawing thin wires, fine wires and special products. Applications: Magnet wires, high and low voltage cables, electrical and electronic devices, communication technology, electrical network, mechanical hardware, construction industry Production capacity: 300,000 tons Honorary titles: Zhejiang Famous Brand Product

Copper wire rod has high technological characteristics. It is used for the production of cables and wires, electrical products. Oxygen -free copper wire rod is used for the production of a wire without breakages and at higher velocity. It can reduce the production cost.