• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • ceramic materials

Results for

Ceramic materials - Import export

Germany

Verified by Europages

high resistance to moisture can be treated with ceramic materials

Request for a quote

France

Verified by Europages

Materials: aluminium, nylon, ceramic Version: with flange or clamp, on request

Request for a quote

Spain

Verified by Europages

Self-levelling mortar based on cement, reinforced with fibres, modified by additives that give it the ability to be fluid and pumpable, especially intended for screeds and levelling of coverings with a thickness between 5 mm and 50 mm, which, once hardened, must be covered with coverings. USES Applicable on concrete or cement mortar supports. On supports with low porosity, apply a Fixmar Primer GR bonding primer beforehand. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of covering, such as parquet, carpet, ceramic, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing product for synthetic coverings.

Request for a quote

Spain

Verified by Europages

Self-levelling cement mortar modified with additives that give it the ability to be fluid and pumpable, especially for screeds and levelling of coatings with a thickness between 5 mm and 20 mm that, once hardened, must be covered with coatings. USES Applicable on concrete or cement mortar substrates, on low porosity substrates, apply previously a Fixmar Primer GR bonding primer. Regularisation of continuous screeds. Ideal in situations where a flat surface is required as a support for the subsequent application of another type of coating, such as parquet, carpet, ceramic tiles, linoleum, ceramic materials, marble... Suitable for underfloor heating and as a finishing material for synthetic coatings. Not suitable for wear surfaces.

Request for a quote

Spain

Verified by Europages

The tile adhesive is a high-performance, single-component adhesive cement, designed, developed, and manufactured with selected marble aggregates, cement, synthetic resins, and other specific additives that provide it with excellent adhesion properties, as well as great flexibility and negligible slip. It is particularly suitable for use in thin layers, with low-absorption and large-format ceramic materials, for facades, high-traffic floors, and floors with underfloor heating. - Professional Adhesive C1T - 25kg Bag. (56 per pallet) - Porcelain Adhesive C2TE - 25kg Bag. (56 per pallet) - Flexible Adhesive C2TE S1 - 25kg Bag. (56 per pallet) - Flexible Gel - 25kg Bag. (56 per pallet) - SuperFlex Flexible Adhesive C2TE S2 - 25kg Bag. (56 per pallet)

Request for a quote

China

Verified by Europages

Features: Made of ground sintered SmCo magnet Powder is mixed with resin and molded like NdFeB bonded magnet No need to be coated because it is difficult to erode and oxidize High-BH (maximum) High-Br and Hc with high-operating temperature, low-temperature coefficient, counter-demagnetization, decay resistance Main products cover SmCo5 and Sm2Co17 magnets, samarium cobalt powder, various assemblies and more OEM orders are welcomed Applications: Widely used in motors, watches, transducers, instruments, positional detectors, generators, radars and more High quality, competitive price, best service

Request for a quote

China

Verified by Europages

Silicon carbide is a kind of inorganic non-metallic materials, with excellent mechanical strength and hardness, small creep deformation, good oxidation resistance, good corrosion resistance and good wear resistance, it is an ideal choice for high temperature engineering materials. Due to the outstanding properties, silicon carbide ceramic is also recognized as a mechanical sealing ring material better than metals, tungsten carbide, al2o3 ceramics and more. Place of Origin: China Material: Silicon Carbide (SiC) Color: Black/grey Material: Silicon Carbide Ceramics Volume density: 3.10-3.15 g/cm3 Max temperature: 1600°C Silicon carbide content: ≥98% Flexural Strength: ≥400 MPa Hardness: ≥ 92 HRA Size: Customizable Application: Industrial Furnaces Supply Ability: 5000000 Piece/Pieces per Month Packaging Details: Standard exporting packing Port of shipment: Xiamen Lead Time :15-30days Payment term: T/T,L/C etc.

Request for a quote

Bulgaria

Verified by Europages

Screen printing is a printing technology, also known as serigraphy. Derived from two Greek words - seri (sieve) and graphos (write). Printing done with a considerable thickness of the layer of ink on fabric, synthetic material, paper, cardboard, plastic, glass, leather ceramic, metal and other materials. The shape of the host surface can be flat and irregular. Characteristic of this technology is the high ink coverage, enabling inscription in dark souvenir with a lighter color. Modern technology in screen printing provide sufficient quality of the print. In screen printing on textiles, the most commonly used inks are plastisol. Characterized by excellent stability and a large range of different colors. Used for printing on synthetic (polyester) and natural materials. Resistant to wash (40 °C) (50 °C) (60 °C). Should not be subjected to dry cleaning, ironing or washing at high temperatures

Request for a quote

China

Verified by Europages

Ceramic PEEK Material Discover the art of precision engineering with Ceramic Filled PEEK Rods. Their exceptional machinability enables manufacturers to achieve intricate designs and complex shapes effortlessly. Combined with high strength and good stiffness, these rods ensure your components maintain their integrity, even under demanding conditions. Trust in Ceramic Filled PEEK Rods for reliable performance and seamless machining, elevating your projects to new levels of excellence.

Request for a quote

South Korea

Verified by Europages

<Product Features> Precision processing using various materials Ceramic quartz sapphire zirconia etc. <Product Specifications> We process and supply a variety of materials according to customer needs. <Product Use> machine chemistry optics <Remark> Purchase Price and Terms are negotiable. <Company Information> GEO Co., Ltd Founded as GEO Trading in 1996, we continuously developed and ungraded ourselves to become GEO Corporation. Based on the experience of importing and exporting Fine ceramics and optical products, we are now dealing with sapphire, semiconductor, and optical quartz in domestic market. GEO Corp. will endlessly strive to pioneer the overseas markets of fine ceramics and automatic door sensors. Website : www.geocorp.co.kr Tel : +82 32-323-6650

Request for a quote

France

Verified by Europages

Ceramic bearings Si3N4. Bearing cage PTFE. For most applications Si3N4 is the preferred material for ceramic bearings. Silicon nitride bearings are light, very hard and highly wear resistant. High and ultrahigh performance bearings are used in e.g. aerospace technology, metal production industries (high application temperatures), machine manufacturing, chemical industries (chemically aggresive substances), pharmaceutical and medical industries, semiconductor and biotechnology (clean room enviroments which may not be contaminated by lubricants). On request Special version with PEEK ball cage. Without ball cage.

Request for a quote

United Kingdom

Verified by Europages

Dubbed ‘ceramic steel’ Zirconia (ZrO2) ceramic materials offer a combination of high hardness, wear and corrosion resistance while still maintaining one of the highest figures for fracture toughness amongst ceramic materials. CeramaZirc Ultra Tough is an advanced zirconia-based ceramic composite material based on partially stabilised zirconia and alumina platelets and is the latest and toughest composite to be introduced by Precision Ceramics.

Request for a quote

France

Verified by Europages

Version: Ground. Top face without centerbore. Note: Rest pads can also be used as feet for jigs and fixtures. Advantages: Cerazur is extremely impact and bend resistant. The basis of this material is zirconium oxide. It is a composite metal-ceramic material.

Request for a quote

United Kingdom

Verified by Europages

Boron Nitride is an advanced synthetic ceramic material available in powder, solid, liquid and aerosol spray forms. Its unique properties – from high heat capacity and outstanding thermal conductivity to easy machinability and superior dielectric strength – make boron nitride a truly outstanding material.

Request for a quote

United Kingdom

Verified by Europages

Alumina-Zirconia (ZTA) ceramic composites are unique ceramic materials by way of exhibiting a combination of high hardness, strength, wear and corrosion resistance characteristics to their alumina component while still maintaining reasonably high fracture toughness specific to its zirconia component.

Request for a quote

Germany

Verified by Europages

We are your reliable partner for the procurement and processing of technical ceramics, e.g. Oxide ceramics (alumina, magnesia, zirconium oxide) and non-oxide ceramics (with carbide or nitride). Technical ceramics - also called industrial ceramics or industrial ceramics - have unique material properties and are therefore one of the most powerful materials available. We offer the following ceramic materials and parts: Semi-finished products: Rods, pipes, flat material, etc. Laboratory parts: bowls, crucibles, etc. Finished parts: Drawing parts of all kinds according to customer requirements

Request for a quote

France

Verified by Europages

Form A locating pins are used to position workpieces and fixture parts in reamed holes. The flattened Form C can be used to bridge tolerances in hole spacing or to secure the part to be positioned in one direction only. The Form A locating pins can also be used as limit stops or fixture feet. Advantages: Cerazur is extremely impact and bend resistant. The basis of this material is zirconium oxide. It is a composite metal-ceramic material. Drawing reference: Form A and B: cylindrical locating pin Form C and D: flattened locating pin

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

Verified by Europages

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

Request for a quote

Germany

Verified by Europages

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

Request for a quote

Germany

Verified by Europages

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

Request for a quote

Germany

Verified by Europages

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

Request for a quote

South Korea

Verified by Europages

MIRHO Corporation make an industrial CNC in person in Korea, called G-Aid, also using for education , industry, dental purpose. We are introducing our signature product, Smart Milling Machine G AiD. G AiD is high speed milling machine for more precise machining. It has comparable six features with another CNC. - Control axis : simultaneous 4 Axis - Spindle : Max 30,000RPM 3.6kW - ATC : Tool detect sensor 7ea, Ф6 - Material : Titanium, Industrial Ceramic, Aluminum, Sus, Steel, SiC, Carbon, ALN, Etc. - Motor : AC servo with IP67 absolute system - Working Area : 100*100 mm - Power Requirement : CE, KCs - Weight : 336kg - External Dimensions : 600*780*1800 mm Feature 1 is "Multiple Jig Solution". Features 2 is "Optimized Motion Controller". Features 3 is "Easier User Interface". Features 4 is "High Speed Milling". Features 5 is Automatic Tool Length Measurement". Features 6 is " Optimized Footprint and Low-Cost High Efficiency".

Request for a quote

Germany

Verified by Europages

Surface treatment with laser with a broad spectrum of applications (improved thermal conductivity, anti-icing / freezing, anti-friction, anti-wear, lubrication, anti-microbial, reduced electrical resistance e.g. for connectors, holograms, product protection, logos, wettability, increase surface area by up to 280% ...). Can be used for metal (steel, aluminum, titanium) polymers / plastics (e.g. polycarbonate), composite material and ceramics

Request for a quote

France

Verified by Europages

Microwave barrier for contactless detection of dry bulk solids in containers, pipes or chutes. Reliable fill level and limit detection. • simple retrofitting • detection through all nonconductive walls • up to 1,000 °C possible with ceramic mounting • insensitive to material caking • usable for profiles up to 25 m

Request for a quote

Germany

Verified by Europages

The Hiresta – UX measuring device is used to measure semiconductors or non – conductors (insulators). Measuring range of 10^3 – 10^14 Ω . The Hiresta UX is specialised in measuring the resistance, the surface and volume resistivity of various substances and materials of all shapes and sizes in the high-resistance measuring range. For measurements related to the ASTM D257 / ISO 2951 / JIS K 6911 standard of: antistatic materials flooring materials paper, packaging materials paints, pastes, paints fibers, clothes, fabrics adhesives, greases glass, concrete, ceramics plastics, film materials, foils etc. Up to 2000 measurement results can be exported to USB memory stick The conductivity meter impresses with its compact design, a color 7.5 “TFT touch display and user-friendly menu navigation.

Request for a quote

Germany

Verified by Europages

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Highly effective due to actively cleaning substances Modern cleaner on a solvent base Fast and residue-free evaporation of the cleaner OKS 2660 is suitable for use with the OKS Airspray system Also available as spray version OKS 2661

Request for a quote

Germany

Verified by Europages

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Modern active cleaner on the basis of a solvent mixture Highly effective due to actively cleaning substances Better initial dissolving of soiling than at brake cleaners thanks to longer soaking-in period No formation of condensate on the material surface OKS 2610 is suitable for use with the OKS Airspray system

Request for a quote

Germany

Verified by Europages

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Modern active cleaner on the basis of a solvent mixture Highly effective due to actively cleaning substances Better initial dissolving of soiling than at brake cleaners thanks to longer soaking-in period No formation of condensate on the material surface OKS 2610 is suitable for use with the OKS Airspray system Also available as spray version OKS 2611 (propellant gas CO2)

Request for a quote

China

Verified by Europages

PEEK Ceramic Composites Elevate your applications with our PEEK ceramic composite. This advanced material combines the exceptional properties of PEEK with the added strength and durability of ceramic. Experience enhanced mechanical performance and wear resistance, making it the perfect choice for demanding industrial solutions. Choose PEEK filled with ceramic for precision and resilience in extreme conditions.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free