Control panels - electric - Import export

Wall Mounted Panel

Marine Type Electrical Distribution Board

Control Panels for electrical process heaters OhmEx has extensive experience in the design of heater control systems and requirements for ‘load splitting’. Loads can also be divided into stages to give thyristor control and in addition combinations of thyristor and contactor control can be supplied to provide a fully synchronised system and limit impact on the power generating system. We can recommend cost-effective solutions to clients, outline requirements, or work to detailed specifications. In-house design facilities are supported by experienced engineers, backed-up by modern CAD facilities. OhmEx adopts an integrated project management approach to each contract, which provides effective co-ordination of design, procurement, manufacture, test and, where required, commissioning. Attention is paid to ensuring that each system is built to the demanding standards of our client, the environment and current legislation. Each control system is fully function-tested for correct operation, as a standard. Each test is simulated using the correct type of input signals to avoid start up and commissioning problems. A range of temperature control systems suitable for anything from small space heating systems to large process heating systems, including full PID control can be offered.

We are your reliable partner for the realisation of your products - from the initial idea to series production and beyond. Our goal is to offer you a comprehensive full service and to manufacture your products economically and in the highest quality. We support you in the consultative development of your early concepts and prepare an initial cost estimate in the concept phase. In addition, we accompany you during series and mass production with our long-standing manufacturing partners in the Far East and ensure reliable logistical handling.

NSPV Miniature Circuit Breaker 1.Main type: C type mainly used for lighting protection; D type mainly used for Dynamic protection. 2.The circuit breaker of Rated current is:16A,20A,25A,32A,40A,50A,63A,80A,100A,125A. 3.The poles of circuit breaker is: single, 2P,3P and 4P. 4.The circuit breaker is installed with 35X7.5 standard rail.

NSPV NL7-63 PV NP DC breaker DC breaker supplementary protectors are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already provided or not required. Devices are designed for direct current (DC) control circuit applications.

AHP manufacture a range of laboratory rotomolding machine for compound manufacturers research purposes to study mold melt flow properties.

AHP manufacture a range of laboratory rotomolding machine for compound manufacturers research purposes to study mold melt flow properties.

The forced air oven is used to condition samples for tests such as longitudinal reversion and as a drying oven (e.g. for water absorption, etc.).

The tester is used to determine the Vicat softening temperature and the heat deflection temperature under load for plastics and thermoplastics.

The falling weight tester is used to determine the external impact resistance of thermoplastic pipes using the staircase or roundtheclock method according to EN744.

The RCP tester conveniently and accurately determines the critical pressure and critical temperature for rapid crack propagation in PE pressure pipes.

It is used in important tests such as MFR, carbon black content, Kvalue, degree of crosslinking, volatile matter, water absorption, etc.

A microscope is required to examine the agglomerates in polyelefins for determining the degree of dispersion. The digital camera is used for images acquisition, documentation and archiving. It is supplied with image processing software and a PC for automatic determining the dispersion grade

ElectroFusion fittings are specifically designed for reliable, high performance pipe joining and long system life. AHP offers a diverse range of electro fusion mechanical testing machines including ISO 13954 Peel Decohesion Testing ISO 13955 Crush Testing ISO 13956 Decohesion testing of Saddle fusion joints. Also we offer dual use machine for both PE pipes squeezeoff tests and mechanical tests of EF joints

It is used for making Vshaped nothes in polyolefin pipes in accordance with ISO 13479 for slow crack growth testing.

It is used for testing leaktightness of fittings for external hydrostatic pressure. It will be needed for testing fittness for the purpose of the system for mechanical fittings

The MFR Tester used to determine the material output from 2.095mm diameter hole in specified loading and temperature condition.

The test method is based on pyrolitic decomposition of the material in an inert gas flow (nitrogen).

Impact testing is used to determine material behavior at higher deformation speeds. AHP offers a wide range of pendulum Charpy/Izod impact testers for tests according to the relevant test standards. These pendulum Izod/Charpy impact testers cover a range from 0.5 Joules to 50 Joules for plastics testeing. These are available with digital touch displays and with a range of different options especially made for your tests (e.g. tensile impact tests for UPVC profiles, ….).

DSC for determining the oxidation induction time for polymer pipe and protective pipe systems as well as moulded elements made of polyolefin.

Easy operation and clear visualization (test curves, calculations) via integrated touch display 16″ Easy to change the grips via malefemale connection Accuracy ±0.5% of full scale Precise, selfcleaning ballscrew Brushless servo motor quarantine maintenancefree operation Easy calibration of loadcell Socket connection of extensometer as standard option

Computercontrolled (CNC) test bar milling machine with installed machining programs and special clamping devices will prepare samples for tensile tests and other specific shaped sample required tests The CNC milling machine is a tabletop unit with protective doors. Preconfigured machining programs for all common sample shapes The allround enclosure ensures safety at the workstation The milling machine is optionally fitted with pneumatic clamping devices Test samples with a maximum length of 250 mm, a maximum thickness of 50 mm can be milled as standard. Optionally thickness of 100 mm is available. Delivered with workbench Test samples milled in accordance with standard dimensions Machined areas cooling with compressed air Highquality unit components guarantee long service time

Have a level control that ensures that the test medium is topped up automatically It has overtemperature shutdown separate control circuit The special cir­cu­la­tion system guarantees high accuracy and uniform temperature distribution. The double insulation of the bath walls Special seals keep steam in the test bath Pneumatic operated doors Quickrelease couplings connections inside the bath Highquality stainless steel SS304 Option to connect a chiller for 20C tests Easy connection to pressure test units

JS INTEGRAL manufactures control panels for self-propelled machines based on documentation provided by the customer (electrical and mechanical), complying with the relevant requirements of PN-EN standards, including mining standards. Depending on the application and functionality, we offer the following types of control panels: • machine operator control panel (the most advanced technologically) • signal-control panel • control box The control panel product range is complemented by the electrical wiring harnesses, manufactured based on customer’s documentation. Application • to control self-propelled machines • to protect electrical devices of machines against the effects of short circuits and overloads • to monitor machine operating parameters (working time, fluids pressure and temperature, fuel consumption, air conditioning and others)

Personalized cutouts on the doors, dedicated fixing accessories inside based on the make and type of circuit breakers, powder painted up to C4H corrosion class acc ISO 12944.

electric metering cabinets, customized on any size, made of steel, powder painted

JS INTEGRAL manufactures control panels for stationary machines and devices based on documentation provided by the customer (electrical and mechanical), complying with the relevant requirements of PN-EN standards, including mining standards Depending on the application and functionality, we offer the following types of control panels: • machine operator control panel • signal-control panel • local control panel Application • to control stationary machines and devices • to protect electrical devices of machines against the effects of short circuits and overloads • to monitor machines and devices operating parameters • to visualize technological processes and automated production lines