Pistons - Import export

Turned spindles, axles, shafts. Pistons for pneumatics, hydraulics, pumps. Ground, hardened, polished, chrome-plated.

Control ranges from 30 to 300 bar. In sizes 1/8 - 1/4 - M 10 x 1 - M 12 x 1.5.

Compressor piston ring set, 4 inch diameter.

When to use piston rings? When piston rings with excellent wear properties are required When simple assembly is of great importance When high edge loads occur When tailor-made solutions based on iglidur® materials are required When not to use piston rings? When the piston rings should seal simultaneously When different diameters should be covered by one part Before: with piston rings: Why complicate things when it can be done differently? Replace elaborately stamped PTFE tapes with a single clip-on guide ring, such as in lifting elements, control valves and fittings. We offer iglidur® piston rings made of freely selectable materials for a wide range of applications. Special properties Easy to assemble Low-priced More wear-resistant than PTFE-bonds Higher load capacity Defined dimensions different materials per ex. iglidur® J, J350… iglidur® piston rings - application examples When to use piston rings? When piston rings with excellent wear properties are required When simple assembly is of great importance When high edge loads occur When tailor-made solutions based on iglidur® materials are required When not to use piston rings? When the piston rings should seal simultaneously When different diameters should be covered by one part Installation recommendations pistons installation recommendations for housings Installation recommendations for housings Dimensions [mm] dS (h-tolerant) [mm] dG (h-tolerant) [mm] bg [mm] Nominal diameters dS = d1 dG = d2 bG = b1 +0,2 Installation recommendations for pistons Dimensions [mm] dG (h-tolerant) [mm] dH (h-tolerant) [mm] bg [mm] Nominal diameters dG = d1 dH = d2 bG = b1 +0,2 b1: Desired length Inner and outer Ø (d1 and d2) made using standard plain bearings* M for metric PRfor piston ring iglidur® desired material

Pneumatic special cylinder in tandem design with two separately controllable chambers and different strokes. Piston rods with anti-twist protection. Complete with connection elements for free suspension according to customer specifications.

Double-acting pneumatic cylinder with piston rod in a special design for use in a press-in device.s

The stopper cylinders are developed to stop or block moving parts, e.g. in an assembly line. The large dimensioned piston rod also allows use as a stand-by stop device.

The rod lock BS is a mechanical device for securely locking the piston rod in any position in the event of a pressure drop. For cylinders with a design according to ISO 15552 and 6432 VDMA.

Cylinder with double piston rod as anti-rotation device against linear movement of the piston rod. Design based on ISO standard. Available sizes diameter: 32, 40, 50, 63, 80, 100 mm.

The CQ series cylinders are manufactured according to ISO 15552 and have diameters between 160 and 250 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

The CZ series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with weight-optimized lightweight profile tube including practical slot for position sensors.

The CY series cylinders are manufactured according to ISO 15552 and have diameters between 32 and 125 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available. Also available in a special version, as a tandem cylinder or with Viton seals for high temperatures. Version with robust and aesthetic profile tube.

Diameter 32-63mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.

Single-acting pneumatic cylinder with two parallel working piston rods made of brass, nickel-plated or stainless steel.

15 adapters suitable for:  Audi  BMW  Citroën  Ford  Fiat  Honda  Jaguar  Mercedes-Benz  Nissan  Renault  Saab  Toyota  Volvo  Volkswagen

Lincoln Repair kit 86219

Pressol mobile grease supply system 200KG with hose reel model 18788051 Grease supply system with trolley (17009) Complete with 10 meter hose reel, High pressure grease gun, Dust cover, drum bracket en follower plate.

Pressol pneumatic grease pump set 20KG Pump is easy to disassemble for cleaning matters. Operate pneumatic grease pump with maintenance unit 20 218 950. Emptying 99% of the container, leaving 1% of residual grease in the container. Low noise level. Quick and simple handling with little assembly effort

Pressol pneumatic grease pump model 18710051 Pump is easy to disassemble for cleaning matters Operate pneumatic grease pump with maintenance unit 20 218 950, only Emptying 99% of the container, leaving 1% of residual grease in the container Low noise level Quick and simple handling with little assembly effort

Lincoln pneumatic oil pump model 282396 Universal stub pomptube 1'' connection. Maximum output 22.0 liter/min Technical specifications Pressure ratio 3:1 Pump tube stub 1'' Maximum output at free range 22.0 liter/min Output per cycle 130cc Output at 75 cycle per minute 9.75 liter Maximum air pressure 13.8 bar Maximum outer pressure 41.4 Air connection 1/4NPT Outlet 1/2NPT

Lincoln grease pump Serie 20 model 83513 Suitable for 18-25kg buckets/barrels. Pressure ratio 50:1 Output a 75 cycles per minute 0.43 liter

Lincoln pneumatic grease pump Serie 20 model 82054 Suitable for 180-200kg barrels.

Lincoln pneumatisc grease pump Serie 20 model 82050 Suitable for 50-60kg barrels.

Lincoln Pilot bar assembly 242786

Lincoln Repair kit soft parts 84793

Lincoln Repair kit 86234

Lincoln PowerMaster Occasion pump model 2022-EA with Airbrake Combination of a 6" Air Motor with Airbrake and a Scoop Tubular Plunger & Canister Style for medium to high viscosity solids lubricants. Pump tube for 200kg drum. Pressure ratio 48:1 Yield per cycle 100cc Revenue at:Approximately 30 Cycles per minute3.0Litre 50 Cycles per minute5.0 Liter 75 Cycles per minute7.5 Liter Pump has been completely overhauled with original Lincoln parts. Delivery including 1 year warranty.

Lincoln PowerMaster pump model 2003 Combination of a 4.25" air motor with shovel foot design, plunger and bushing style for medium to high viscosity, non-fluid materials. Pumptube for 200kg drum. Pressure ratio 40:1 Output per cycle 61cc Output at:Approx 30 Cycles per minute1.8 Liter 50 Cycles per minute3.0 Liter 75 Cycles per minute4.5 Liter

Lincoln PowerMaster Occasion Pump Model 2022 Combination of a 6" Air Motor with a Scoop Tubular Plunger & Canister Style for medium to high viscosity solids lubricants. Pump tube for 200kg drum. Pressure ratio 48:1 Yield per cycle 100cc Revenue at:Approximately 30 Cycles per minute3.0Litre 50 Cycles per minute5.0 Liter 75 Cycles per minute7.5 Liter Pump has been completely overhauled with original Lincoln parts. Delivery including 1 year warranty.