Electronics - import-export - Import export

CEE floor box 6400E with one slot. The housing of the CEE floor box is made of stainless steel, the device carrier is made of aluminum. Installation can take place anywhere in the floor, since pipelines are used for the line feed. The lid closes even when the plug is inserted. Further configuration variants on request.

Floor socket 3202E consisting of a hinged connection module made of 1,5 mm stainless steel, polished. The hinged lid also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for raised floors, exhibition areas, etc. Further equipment variants on request.

Floor socket 8602A with hinged lid that can be closed without tools. Heavy design, can be driven over, with lid seal. Suitable for cleaning with wet sweepers. The lid is anodized in natural aluminum. Other colors and equipment options on request.

Floor socket 8604A with a hinged lid that can be closed without tools. Heavy version, passable, with lid seal. Suitable for cleaning with wet sweepers. The frame, the lid and the gear tray are made of solid aluminium, the housing is made of sendzimir galvanized sheet steel. Other colors and configurations on request.

Round floor socket 7704A with screw cap made of aluminum with 4 slots. The floor socket is made of solid, gray PVC and can be used both outdoors and indoors. When closed, it is waterproof. The floor socket is opened and closed with a special key. Further equipment variants on request.

Round CEE floor tank 7705A in heavy design with housing and screw lid made of solid PVC and a device carrier made of aluminum. The lid is made of aluminum and can be locked with a special key. When closed, the CEE 7705A floor tank is waterproof. Degree of protection IP 67. Further configurations on request.

The housing of the 2003A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The housing, the lid and the frame of the floor box 2003B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 3 installation devices. The sockets are VDE certified. Further equipment variants on request.

The housing of the 2003Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing of the 2004A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 4 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The housing of the 2004Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 4 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The plastic insert 12108 serves as a screed placeholder for the floor socket 9902A and 9902D.

Rain protection set 12255 consisting of an extension made of PVC and a black protective cap made of soft PVC for the floor sockets 7702A and 7704A. The rain protection set offers ideal protection against rain with plugged-in connections.

This system was designed to make calling easier whether it’s from guest -to- staff in Restaurants or patient- to – nurse in Hospital or elder – to -caregiver in Nursing home. [Advantage of Using Wireless Paging Service System] 1.Improve work efficiency and save staff costs. 2.In restaurant, customer to get help quickly and conveniently. 3.In Hospital or Nursing home, patients or elder to get help and conveniently. 4.OEM / ODM Order Acceptable Widely used in various occasions and places : Wireless Paging Service System applied to Restaurant, Cafes, Fast Food Restaurant, Bar, Karaoke, Factories, Hospitals, Hotels, Nursing Home, Emergence Center, Banks, Schools, Construction sites. [Our Company] Since its establishment, UNIBINI has devoted itself to developing technologies that help deliver a better customer experience in the service business. We understand the need for a seamless and easy communication solution between customer needs. http://www.unibini.com

Energy column/energy bollard EST24 for outdoor use on a foundation created on site. The case is made of brushed stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and fully wired. The energy column can be locked with a profile half cylinder. The degree of protection of the electrical units is IP44. Optional interior lighting selectable. Other equipment variants on request.

Power bollard ESP24 for outdoors, protection class: housing IP10, electr. Units IP44. The housing is made of 2 mm glass bead blasted stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and completely wired. The power bollard can be closed with a profile half cylinder. Thanks to the cable outlet, the door of the power bollard can also be locked when it is in use. Coatings in RAL colors are also possible on request! The equipment is variable.

Socket Pillar/Power Bollard ESP14 for outdoors, protection class IP 44. The housing consists of 2 mm glass bead blasted stainless steel. The sockets are integrated in a plastic housing, protected with FI/LS and completely wired. The power bollard can be closed with a profile half cylinder, even with plugged-in connections. Coatings in RAL colors are also possible on request! The equipment is variable.

Energy column/power bollard ES401 on a foundation created on site for indoor and outdoor use. The housing is made of stainless steel, the sockets are secured with 2-pole FI/LS and wired ready for connection. The degree of protection is IP44 (electrical units). Other equipment variants on request.

Energiesäule/Energiepoller ES325 für den Außenbereich auf vor Ort erstelltem Fundament. Das Gehäuse ist aus Edelstahl V2A gefertigt und glasperlengestrahlt. Die Geräteplatte besteht ebenfalls aus Edelstahl und ist unverdrahtet. Schutzart IP44 (elektrische Einheiten). Weitere Bestückungsvarianten auf Anfrage.

Socket pillar or power bollard ES323 for outdoor use on a foundation created on site. The housing and base are made of solid, glass bead blasted stainless steel. The device plate is also made of stainless steel and is unwired. Degree of protection IP44 (electrical units). Other equipment variants on request.

ES321 socket pillar/power bollard for outdoor use on an on-site foundation. The housing and base are made of solid, glass bead blasted stainless steel. The device plate is also made of stainless steel and is unwired. Degree of protection IP44 (electrical units). Other equipment variants on request

Socket pillar ES301 for 2 units. Due to the IP 44 protection class, the power column is splash-proof. The case is made of solid stainless steel. The material is glass bead blasted. The socket outlets have a VDE mark. The installation unit is suitable for outdoor use! Further equipment variants on request.

Wall distributor 5723E with 5 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The flush-mounted wall distributor 5723E is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5722E with 4 slots, splash-proof. Protection class IP 44 (electrical units). The housing is made of Sendzimir galvanized sheet steel. The frame and the door are made of stainless steel and the device carrier is made of aluminum. The door closes even when standard plugs are inserted and can be locked with a profile half-cylinder lock. The 5722E flush-mounted wall distributor is suitable for indoor and outdoor use. The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost

Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall socket 5602E with 2 slots, for standard plugs in straight or angled form. The complete housing is made of V2A stainless steel and the device carrier made of aluminum. The door can be closed with a locking bolt cylinder and also closes when plugged in. The 5602E on-wall socket is ideal for workshops, cellars and washrooms. Further equipment on request!