• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • energy sources- alternative - equipment and systems

Results for

Energy sources- alternative - equipment and systems - Import export

Austria

The LxxxR-21 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is fitting in existing common housings of CT´s, but with wide range behaviour and lower costs.

Request for a quote

Austria

The voltage sensors of Type TxxxB-xx is dedicated to the new T-connector of Euromold/Nexans, called (K) (M)480TB. The T-connectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED.

Request for a quote

Austria

The NxxxE-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio

Request for a quote

Austria

The NxxxT-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio.

Request for a quote

Austria

The NxxxE-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able and divided into 3 separate rings, which makes it able to put the sensor on an existing cable. The rings makes it possible to install this product inside switchgears, where the pole distance of the phases can vary up to 1.5m.

Request for a quote

Austria

The NxxxT-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED.

Request for a quote

Austria

The NxxxR-xx current sensor is dedicated for installation on the bushing of a gas insulated switchgear in the secondary energy distribution. The design is slim and the holding system can be adapted to different kind of T-connectors. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED.

Request for a quote

Austria

The A240P-5K voltage detector is a voltage sensor based on a capacitive divider principle. Inside the product there is a high stable capacitor, with a high capacitance and up to 15nF and up to 24kV insulation level. The product is dedicated for gas insulated switchgears and is used for asymmetric T-connectors from a range of different manufacturers.

Request for a quote

Austria

The A240S-5K voltage detector is a voltage sensor based on a capacitive divider principle. Inside the product there is a high stable capacitor, with a high capacitance and up to 15nF and up to 24kV insulation level. The product is dedicated for air insulated switchgears and could be used also as support insulators with bending forces.

Request for a quote

Austria

The voltage sensors of Type TxxxC-xx are commonly used in asymmetric T-connectors of different manufacturers. The T-connectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed, and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED. The product range -0U is especially made with maximum cost effectiveness by utilizing correction factors

Request for a quote

Austria

The temperature sensor system is made for solving a big problem in switchgears. It is modular and can be used in cable compartments of gas insulated switchgears or even in air insulated switchgears, directly on the medium voltage busbars to monitor temperature rises, especially in busbar conjunction points. The system could be delivered with wired cost efficient solutions for low voltage applications or on medium voltage cables or completely galvanic separated with a Power over fiber connection from the base station to the temperature sensors directly attached to the primary busbar.

Request for a quote

Austria

The voltage sensors of Type TxxxC-0U are commonly used in T-connectors of different manufacturers. The Tconnectors ar usually closed with a Type C - Blindplug, this could be removed and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED. The product range -0U is especially made with maximum cost effectiveness by utilizing correction factors.

Request for a quote

Austria

The voltage sensors of Type T360Cxx is made for T-connectors with a Type C cone acc. IEC 50181. The Tconnectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed, and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED. This sensor is especially made for a insulation level of 36kV.

Request for a quote

Austria

The A240F-16K is a high voltage coupling capacitance dedicated for Power-line-carrier communication. It is used in outdoor applications, usually on poles. Inside of the product is a big capacitance of over 10nF, which makes the communication through the network possible.

Request for a quote

Austria

The K240A-xx is one of the newest developments from GWP. It is a combined voltage and current sensor in block type form factor dedicated for air insulated switchgears in the primary energy distribution. It contains a wide range current sensor and a voltage sensor, and it is even possible to put a 3rd component, a low power conventional current transformer inside to enable the maximum flexibility for the customer.

Request for a quote

Austria

The K120A-xx is one of the newest developments from GWP. It is a combined voltage and current sensor in block type form factor dedicated for air insulated switchgears in the primary energy distribution. It contains a wide range current sensor and a voltage sensor, and it is even possible to put a 3rd component, a low power conventional current transformer inside to enable the maximum flexibility for the customer

Request for a quote

Austria

The combined voltage and current sensors of Type K240F-xx are used in outdoor installations usually on poles. The sensor is connected with the common earth by the installation point of the product and with the secondary connection cable connected to an IED. It can resist all weather conditions and environmental changes due to the usage of silicon material, which is also used as standard materials for high voltage insulators.

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Austria

One of the latest developments of GWP is the ultra-wide range current sensor for the primary energy distribution. This product has an incomparable measurement range starting from 0,5A up to 100.000A with a defined accuracy. Primary use case is in combination with protection relays.

Request for a quote

Austria

The LxxxT-28 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is made for installation on low voltage cables either isolated or not isolated. It combines a wide range behaviour with low costs. The usage of correction factors enables even better corrections in combination with dedicated devices.

Request for a quote

Austria

The LxxxR-32 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is fitting in existing common housings of CT´s, but with wide range behaviour and lower costs.

Request for a quote

Austria

The LxxxT-44 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is made for installation on low voltage cables either isolated or not isolated. It combines a wide range behaviour with low costs. The usage of correction factors enables even better corrections in combination with dedicated devices.

Request for a quote

Turkey

They are designed to be used in equipment such as filters, where differential pressure occurs during fluid passage. The red pointer indicates the last level of contamination and the black pointer indicates the current differential pressure. Magnetic sensor with reed contact can be used to receive the signal at a desired value of differential pressure. Suitable for Scada applications. They can be used in non-corrosive gases and liquids such as natural gas, LPG, air, nitrogen, water.

Request for a quote

Poland

Verified by Europages

The DRAGON Domestic Vertical Wind Turbine is an efficient and reliable renewable energy solution designed for domestic use. With a turbine power of 500W and a voltage of 48DC, it harnesses the power of wind to generate electricity effectively. What sets it apart is its ability to start producing electricity at low wind speeds, with a starting wind speed of just 1.2 m/s. This means that even in gentle breezes, it can begin generating usable energy. Built with durability in mind, the DRAGON Turbine ensures reliable performance over an extended period. Its lightweight design facilitates easy installation and maintenance, making it accessible for homeowners. Moreover, its modern and sleek aesthetic seamlessly integrates into residential settings, enhancing the visual appeal of your property. By utilizing wind power, this vertical turbine offers an environmentally friendly alternative to traditional energy sources.

Request for a quote
Filters

Results for

Energy sources- alternative - equipment and systems - Import export

Number of results

24 Products