Home automation - Import export

Ekinex® delégo is a supervision system which allows to control and monitor a domotic plant using a mobile device (smartphone and tablets) equipped with Apple iOS or Android operating system. The supervision system is based on a dedicated hardware platform running a simple and intuitive configuration web interface. Through this interface it is possible to perform the plant’s setup in few steps, by directly importing the ETS project of the domotic plant: in this way, once the import phase is completed, the user can start to control and monitor all the domotic functions of the delégo application.

The Ekinex® gateways are modular KNX devices for panel mounting. The Gateway range includes: Modbus, which are devices that allow an exchange of information between one or more slave devices communicating on a RS485 differential serial network or by Ethernet through Modbus protocol; BACnet, which allow an exchange of information with a master device communicating on a RS485 differential serial network or by Ethernet through BACnet protocol; DMX, which allow an exchange of information between one or more slave devices communicating on a RS485 differential serial network or by Ethernet through DMX protocol; M-bus, which allow an exchange of information between one or more slave devices communicating through M-bus protocol; Profinet, which allow an exchange of information with a master device communicating by Ethernet through Profinet protocol; DALI, which allow an exchange of information between one or more slave devices communicating through DALI protocol.

The Ekinex® products for temperature control are grouped in fancoil, electrothermal actuator and mixing group controllers. Fancoil controllers are KNX devices that operate as actuators or both actuators and room temperature controllers for air terminals such as fans, convectors and fancoils. The Ekinex® S-mode KNX devices for electrothermal actuator and/or servomotor control for zone valves are installed on the supply manifolds of the radiant plants or radiators. The mixing group controller regulates the supply temperature of the heating fluid using a selectable regulation mode, separately for heating and cooling.

The Ekinex® actuator / dimmer is an S-mode modular KNX device for panel mounting, able to command and regulate the brightness of lighting devices. In order to function properly, the device has to receive a telegram from the bus, sent by a KNX sensor (for example a pushbutton, a sensor or another command/control device) or another KNX command device, which opens or closes the corresponding relay or regulates the brightness of the connected lighting device.

The Ekinex® actuator / binary output for actuator control is an S-mode KNX modular device for panel mounting, which is able to convert electric signals in actions and therefore control motorized actuators. In order to function properly, the device has to receive a telegram from the bus, sent by a KNX sensor (for example a pushbutton, a sensor or another command/control device) or another KNX command device, which opens or closes one or more relays (such as blind control, etc.).

The Ekinex® EK-IA1-TP CODESYS® PLC is an advanced, freely programmable logic module equipped with a KNX interface allowing the simultaneous execution of several complex logic blocks. The devices is equipped with an integrated bus communication module and is designed for rail mounting inside electrical cabinets.

Ekinex® proposes a KNX binary input and a 6 channel pushbutton interface. The binary input is an S-mode modular KNX device for panel mounting, used for the connection to the bus of traditional (i.e. not natively communicating on KNX bus) commands and sensors equipped with dry contacts. The pushbutton interface, besides being used as input, can also be used as an output line, with the specific purpose of controlling high efficiency indication LEDs.

Ekinex® proposes system devices such as bus couplers or interfaces between KNX and USB devices. Those devices are used to build an efficient communication infrastructure and allow the system integration in different environments.

The simple and essential design that makes compactness a distinctive feature. Pushbuttons, thermostats and flush-mounted inserts may be combined according to your taste and your needs.

Simple and linear. An essential form that suggests an idea of reliability and precision. A range of pushbuttons, touch-displays and plates which help to make yours the concept of home automation.

adapting to all spaces with its straight or arch design according to user preferences, has an aesthetically good appearance and design in terms of architecture. With its elegant style and compact design, you can reach the luxury and comfort you seek in your outdoor spaces with Ambiance.

Our office container sets are specially designed to be used as a temporary administrative work area for staff, regardless of construction site conditions. Our prefabricated container can be dismantled in sets, with an external height of 2.60 m and a standard 6.00 × 2.50 m. Office containers can be customized and dimensioned to include the following options air conditioning, furniture, computer network and telephone, home automation, guard (guardrail), high floor. Prefab. Office containers (construction site office) are delivered as a set disassembled. 10 prefabricated office of 15 m2, with one door and two windows, fully electrically equipped, are shipped with only one 40foot sea container. Our office containers can be joined (assembled or stacked) to form prefabricated modular buildings. Our office container sets are specially designed to be used as a temporary administrative work area for staff, regardless of construction site conditions. Our prefabricated container

Contract Manufacturing by SEACOMP Get your concept to physical product with our electronics manufacturing services. Use our engineering team to get your design ready for mass production or let us take your perfectly designed product and build it at scale. We help launch electronic devices for home automation, industrial controls, consumer products, and medical devices. Manufacturing is completed in our wholly-owned China facility that is ISO 13485 certified. Our production capabilities include: - PCB Assembly, Surface Mount (SMT), Through Hole Assembly - Wave Soldering - Reflow Soldering - Plastic Injection Molding (vertical and horizontal) - Ultrasonic Welding - Cable Assembly and Over-Molding We also provide the finished assembly of your product before it is shipped anywhere in the world: - Laser Marking - Pad Printing - UV Ink Curing - Label Printing - UV Light Metering - Box Build Assembly - Bulk or Retail Packaging - Warehousing Contact us to learn more.

The Microchip Network Interface Card (NIC) ENC28J60T-I/SS is a 10 Mbps Ethernet controller with an integrated PHY and MAC. It is designed to provide a low-cost, low-power solution for connecting microcontrollers to Ethernet networks. The ENC28J60T-I/SS is available in a 28-pin SSOP package and is compatible with the industry-standard 10 Base-T protocol. It supports full-duplex and half-duplex operation and has a maximum current consumption of 160mA. The ENC28J60T-I/SS is suitable for a wide range of applications, including industrial automation, home automation, building automation, and medical device networking. It is also suitable for use in embedded systems, such as those used in consumer electronics, automotive, and IoT applications.

The Microchip Technology PIC18F67K22-I/MR microcontroller is a 8-bit device with 32K x 14 Flash program memory, 3 kB Data RAM, 1K x 8 EEPROM, and 28 I/O pins. It has an operating voltage range of 1.8 V to 5.5 V and an operating temperature range of -40 C. It features 11 Timers, 4 PWM channels, 10-bit ADC resolution, and I2C, SPI, and UART interfaces. The PIC18F67K22-I/MR microcontroller is suitable for a wide range of applications, including automotive, industrial, medical, and consumer electronics. It can be used for motor control, power management, data acquisition, and communication. It is also suitable for embedded systems, such as home automation, security systems, and robotics.

The ATMEL ATmega168-20AU is an 8-bit AVR microcontroller with 16KB of Flash memory, 32-TQFP (7x7) package, and operating temperature range of -40°C to 85°C (TA). Features: • 8-bit AVR microcontroller • 16KB of Flash memory • 32-TQFP (7x7) package • Operating temperature range of -40°C to 85°C (TA) • 20MHz clock speed • On-chip debug support • In-system programming and debugging • Low power consumption • Enhanced I/O capabilities • Up to 16 external interrupts • Up to 8-channel 10-bit A/D converter • Up to 4 USARTs Applications: The ATMEL ATmega168-20AU is suitable for a wide range of applications, including: • Automotive • Industrial control • Robotics • Home automation • Security systems • Medical devices • Consumer electronics • Wearable devices • Networking and communications

ATMEL Microcontrollers ATSAMD21G18A-AU is a low-power MCU based on the ARM Cortex M0+ Core. This MCU has 38 I/O pins and is housed inside a 48-TQFP package. It also has an internal oscillator and a 48 MHz speed processor. The microcontroller has Connectivity features such as I2C, LIN, SPI, and UART/USART. Furthermore, it has 14x12b A/D Data Converters and 1x10b D/A Data Converters. The Brown-out Detect/Reset, DMA, I2S, POR, PWM and WDT are the peripherals included in this microcontroller. Features: • Low-power MCU based on the ARM Cortex M0+ Core • 38 I/O pins and 48-TQFP package • Internal oscillator and 48 MHz speed processor • Connectivity features such as I2C, LIN, SPI, and UART/USART • 14x12b A/D Data Converters & 1x10b D/A Data Converters • Brown-out Detect/Reset, DMA, I2S, POR, PWM and WDT peripherals Applications: • Automotive control systems • Industrial control systems • Robotics • Home Automation Systems • Data Acquisition and Signal Processing • Medical Devices

Power Jack Motion offer the gate actuator for the door opener or gate motorized project. Home automation and smart home request. Gate actuator matched with controller to keep you home safe and comfortable

dc brush motor with flange.The brake,encode,hall sensor and other controller PCB could be available.For automation,smart home application

With timeliness and professionalism we provide assembly and maintenance services for electrical systems. Our qualified, up-to-date engineers are available to design, manufacture and adjust any kind of electricity system, from residential and civil systems to industrial ones. The company offers: Design and construction of electrical systems for industrial machines and production lines. Design and construction of civil electrical installations Production of subcontracted electrical systems Civil and industrial electrical systems maintenance Video surveillance Anti-theft systems Gate automation Home automation systems Lighting

POWER LINE MONITORING Let’s automate repetitive tasks Home POWER LINE MONITORING POWER LINE MONITORING Let’s automate repetitive tasks Context Power lines need to be monitored to find default in their structure. Current situation Analysis is usually made through a helicopter which is costly or by manual inspections which is dangerous. Our solution ALX System provide automatic path following, with detection of default in power lines. We provide planes able to fly for about 10.000 Km without interruptions

Switch your radio relay receiver on and off comfortably with your smartphone in a WLAN enviroment. The clever way to start with home automation. Conveniently and comfortably switched connected devices on and off from your couch from your smartphone e.g.: - Indoor/outdoor lighting - Entertainment electronics - Garden pond pump - Fans - Christmas lights etc. Control the 433 MHz wireless relay receiver. Simple operation via a SteckerPRO app (available for iOS and Android). The gateway is the link between your electrical devices and your home network (WLAN router). Compatible for example with the SteckerPRO App (www.steckerpro.com). To switch your connected devices on and off on the go you will need a standard vpn connection. Package contents: Gateway 433 MHz, power supply, 1.8 m USB cable, 1 m network cable, antenna. System requirements: Smartphone/tablet with iOS or Android, home network with WLAN and ethernet, DHCP router. In colourful display-packaging.

Switch your radio relay receiver on and off comfortably with your smartphone in a WLAN enviroment. The clever way to start with home automation. Conveniently and comfortably switched connected devices on and off from your couch from your smartphone e.g.: - Indoor/outdoor lighting - Entertainment electronics - Garden pond pump - Fans - Christmas lights etc. Control the 433 MHz wireless relay receiver. Simple operation via a SteckerPRO app (available for iOS and Android). The gateway is the link between your electrical devices and your home network (WLAN router). Compatible for example with the SteckerPRO App (www.steckerpro.com). To switch your connected devices on and off on the go you will need a standard vpn connection. The remote receivers sockets have a switching capacity 1.000 W and a work up to a distance of 25 meters. Package contents: Gateway 433 MHz, power supply, 1.8 m USB cable, 2 x remote receivers socket, 1 m network cable, antenna. System requirements:...

New Project in Calpe with excellent views of the Sea, Rock, and the bay of Calpe. The villas are of the latest design and with excellent construction materials of high standing. The House is built on different levels, all by home automation, It benefits from an Elevator, BBQ area, Chillout area, Underfloor heating, Design garden, infinity pool, etc.

Feature Enhanced slim design panel PC Multi-touch available RoHS Compliance, CE (Various Model) Certified. Accessary : Power code Applications Medical, Industrial field, Simulation, Education Home automation, Tickecting and more. Panel spec LCD PANEL : LM190E0A-SLA1 Screen size : 19 inch Backlight unit : LED Active area(mm) : 19inches (479.96mm) diagonal Pixel pitch(mm) : 0.0976 x 0.2928 Resolution : 1280 x 1024 Contrast ratio : 1000 : 1 Brightness : 250 Viewing angle : 89 / 89 / 89 / 89 Operation temp : 0~60 Storage temp : 0~60 Standard type Input signal : CRT, DVI, Ethernet, USB, Serial, Audio Input Power : DC 12V Frame : Panel Mount Touch : - Option Input signal : - Input Power : AC 110~220V Frame : OPEN, CHASSIS Touch : Resistive, PCAP Etc : Glass

https://spainrealestateoffers.com/listing/for-sale-poniente-beach-benidorm/ Luxury apartments and duplexes to move into on the first line of Cala de Benidorm, in Playa de Poniente. Composed of 4 ground-floor apartments and 4 duplex penthouses with large terraces and a private pool facing the beach, and a few meters from the sand. The houses are distributed in 3 bedrooms, 2 full bathrooms, living room, kitchen, gallery and large terrace with private pool and wonderful views of the bay. They also have an underground garage with capacity for 3 cars. Top quality finishes, air conditioning and home automation, make this project one of the most exclusive on the first line of the Poniente Beach Benidorm Costa Blanca. Benidorm is the quintessential capital of the Costa Blanca, the main tourist focus of the entire Levantine coast, where we also find important towns such as Alicante, Torrevieja, Elche, Villajoyosa, Altea, or Calpe.

High requirements are the core competence of the RAPID machine series. At home in the construction of automated systems with very high performance requirements. An energy-efficient electromechanical drive with extremely quiet running for precision designed printing motifs will guarantee your additional benefit. The User-friendly touch panel offers a number of setting options and makes it possible to coordinate the machine exactly to your customer-specific task. The RAPID series is available with useful, practical and additional extensions for individual configurations.

TFT (thin film transistors) are a specialised type of LCD that uses TFT technology to improve the quality of the image including contrast. GSR Technology offers an extensive range of TFT LCD displays that are fully customisable to cater to your individual needs. TFT LCD Display Applications TFT LCD monitor applications include: Access control HMI systems Fire and Security systems Kiosk (information) Medical devices Home Automation Test Instrumentation Parking Meters Digital Signage Navigation Devices ** Click to know more **

With our qualified staff we perform for you all kinds of electrical installations and / or automation in your home, premises or industry. MG Electricidad is specialized in works that have to do with the food industry, we can make the integral reform of your house, local or industry, no matter how big it is. Our team is composed of qualified professionals, we firmly believe that every job in your installation has to be carried out by an expert in his field.