Hot air generators - Import export

Heating of greenhouses and large areas with diesel or gas hot air generators The hot air generators for greenhouses of the AM series are equipment that works completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

Industrial wall mount heater with diesel operation The GS wall-mounted industrial heaters are units that operate completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its diesel operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air in adjoining areas where the equipment has been installed. - Efficiency of combustion of 92%.

Portable diesel heaters for heating closed spaces The portable diesel hot air heaters with smoke outlet, are ideal for heating indoor spaces. The equipment is totally portable and incorporates a fuel tank to obtain a correct autonomy of operation. The equipment incorporates a burner that provides a flame inside the combustion chamber that travels inside to obtain the greatest heat exchange. A fan providing air inside the equipment and when passing through the hot zones increases its temperature and is driven inside the room to be heated. These equipments have flue gas outlet and are suitable for any type of premises. The equipment can be controlled with an ambient thermostat that is responsible for starting or stopping the equipment depending on the desired temperature.

Our modules to increase the air temperature incorporate a combustion chamber and heat exchanger with high thermal performance, it has an insulated exterior paneling and a temperature control panel to order the start and stop of the burner and the fan. Our modules to increase the temperature are designed to be applied in drying process facilities where it is required to increase the temperature of the air driven by an external air fan. Depending on the air flow, the thermal increase can range from 20ºC to 60ºC. The air flow treated by the equipment can range from 2,150 m3/h to 18,000 m3/h depending on the selected model. The fuel used by the burner can be diesel, natural gas or propane gas.

Outdoor hot air generator for the heating of tents, covered swimming pools, etc. POOL MANN hot air generators are a perfect solution for the heating of closed premises where a heating system is required where the heat generating equipment must be located outside the room to be heated. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

Domestic heating with hot air boiler with diesel operation Hot air boilers with diesel operation are a fast and efficient system for heating domestic and commercial premises. The equipment has a soundproofed interior of the diesel burner so that its operation is as quiet as possible. It also incorporates a 3-speed fan to adjust the air flow according to the heating needs of the room to be heated. For its operation, a fuel tank, a smoke outlet and a single-phase connection socket are required. The diffusion of the hot air can be direct or with a network of ducts to direct the hot air to the different rooms to be heated.

Industrial heating with hot air generators with pellet operation from 43 to 300 kW The hot air generators with pellet operation are fully automatic equipment used for heating industrial, agricultural and livestock premises. Its use is increasingly frequent thanks to its rapid depreciation and neutral CO2 emissions that contribute to the preservation of the environment. The equipment has a basic equipment designed for the use of granulated fuels, an automatic burner that allows the use of granulated fuel such as pellets, olive bone or almond shells. It also has an automatic ash extraction system to keep the combustion chamber in perfect condition and a smoke extractor to ensure proper depression in the combustion chamber. The equipment can be supplied with a fuel tank of 190 or 400 liters capacity with the possibility of applying larger storage systems such as canvas or work silos. The diffusion of the air can be with rotating nozzles or through air ducts.

Drying processes with hot air generators fully configurable in flow and air pressure AGM hot air generators are units that work completely autonomously, they do not need heat dissipative elements, which reduces acquisition and installation costs. They can run on diesel, natural gas or propane gas and their function is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated or dried. Its design allows the application of all types of low, medium or high pressure fans according to the needs of each installation. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating or drying system. - Air diffusion can be direct or a network of ducts can be applied. - 90% combustion efficiency. - Possibility of supply with low, medium or high pressure fans.

Hot air heaters with gas operation from 23 to 34 kW The K gas hot air heaters are units that work completely autonomously, that is, they do not need heat dissipative elements, which reduces acquisition and installation costs. Its operation can be methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - Combustion efficiency greater than 90%.

Industrial warm air heater with diesel or gas operation from 26 to 500 kW The MM hot air generators are indirect heating type equipment (the hot air does not mix with the combustion gases) and they work completely autonomously. They do not need additional elements for heat dissipation, a fact that reduces acquisition, installation and maintenance costs. Its operation is based on the heating of a certain air flow, through the combustion of diesel, natural gas or propane gas. Said flow is aspirated and driven by the fans that the equipment incorporates and that comply with the ERP 2020 regulations. The main advantages over other heating systems are: - Reduction of acquisition and installation costs - Very fast heating system - Air diffusion can be direct or a duct network can be applied - 90% combustion efficiency

The ECO POL industrial wood stoves are designed for fast and efficient heating of all types of industrial, agricultural and livestock premises. The equipment incorporates a large combustion home where firewood or woody waste is introduced, once the combustion is carried out, the gases come into contact with a heat exchanger where heat transfer occurs with the air driven by a fan. The hot air is diffused in the room to be heated, obtaining a very fast and efficient heating system. With our industrial wood stoves, you will obtain a fast and efficient heating system, taking advantage of the woody waste produced in the manufacturing tasks (wooden pallets, wooden boxes, cardboard boxes, etc.). We have two models that provide a heat output of 50 and 100 kW that allow heating of 300 to 600 m2.

Powrmatic CPx 360kW Gas Fired Cabinet. Upright. Horizontal and External Cabinet Heaters also available

Powrmatic SRP U-Tube Radiant heater

switched reluctance, permanent magnetic, block- or sinusoidal commutated

e-mobility, generator axles, autonomous trailer applications

permanent magnetic test bench motors for power train and component test applications

permanent magnetic test bench motors for power train and component test applications

Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 200: Heating performance: 40 kW Air flow rate: 3,000 m³/h Input voltage: 400 V Power consumption max.: 61 A Fuse protection / plug: 63 A / CEE 63 A, 5-pin Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 75 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1,625 mm Width: 800 mm Height: 1,270 mm Weight: 230 kg

Hot air heating with portable equipment with butane gas or propane gas for open or properly ventilated premises Hot air heaters with butane or propane gas operation are a really effective system for heating open or properly ventilated spaces. The equipment has a gas-operated burner, which provides an internal flame responsible for heating a small combustion chamber. The air driven by the fan passes through the combustion chamber and the hot air provided in this exchange is used to increase the temperature of the room to be heated.

Domestic and commercial heating with hot air boilers with natural gas or propane operation Our hot air boilers are ideal for domestic and commercial heating of premises from 370m3 to 840m3. Our hot air boilers can work with natural gas or propane gas and have a sealed combustion system, that is, the air used for combustion is from the outside and in this way the air from the room to be heated or from the air is not used. living place. Our hot air boilers can diffuse the hot air directly or a network of ducts can be applied to distribute the hot air in the different rooms of the house.

Heating of mechanical and automotive workshops with hot air equipment with diesel operation The hot air generators with diesel operation of the VE series are the perfect solution for the heating of small mechanical or automotive workshops. The equipment will quickly and efficiently provide hot air to obtain a comfortable comfort temperature in a very short time. The team has a 35-liter fuel tank for a range of about 3-4 days. A powerful and silent fan provides the hot air necessary for heating premises of up to 150-175m2. The room thermostat incorporated in the equipment will be in charge of starting or stopping the equipment depending on the desired temperature and in this way the energy consumption of the equipment will be optimized. The installation is as simple as installing a smoke outlet to evacuate combustion gases outside the room to be heated and a single-phase electrical connection socket.

Industrial drying processes, post-harvest treatment of fruits and vegetables, paint booths Our hot air generators for industrial drying processes can run on diesel or gas and develop a heating power of 50 to 390 kW. The hot air supplied to the drying process has a thermal jump from 18 ° C to 30 ° C and a large supply of air for rapid drying without altering the physical properties of the product. For other types of drying where a higher temperature is required, we can carry out a specific study. The range is made up of different models with thermal jumps, flow rates and air pressures suitable for any type of drying. MM-H Thermal jump from 28-30 °C with available air pressure from 150 Pa. MM-W Thermal jump from 28-30 °C with available air pressure from 150 Pa. CP Thermal jump from 18-20 °C and available air pressure from 200 Pa.

QSun-M1 (800W) is good for 5-12m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M3 (2400W) is the most powerful heater in ceramic M-series, it can cover up to 10-20m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-A2 (1600W) is good for 8-15m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-A1 (800W) is good for 5-12m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M3 (2400W) is the most powerful heater in ceramic M-series, it can cover up to 10-20m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M2 (1600W) is good for 8-15m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!