Industrial heating - installations and equipment - Import export

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

InduStrip EZ2 radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators are for commercial use like in department stores, warehouses or industrial buildings. The heating elements emit no light and thanks to the clear design, the EZ2 inconspicuously integrates into the electrical installation. Recommended mounting height up to 3.5m.

InduStrip IHS radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators can also be used outdoors like on sports stands or loading ramps to keep them dry and frost-free. Robust industrial design, galvanized steel casing, high-gloss aluminum reflectors.

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HWP2-series is dust- and water-jet tight complying with IP55 rating. HWP2 heaters are a stylish means of providing comfort heat in outdoor or indoor locations

In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch. After the technical embroidery process, the safety switch is inserted and connected by our company’s respective department. Each prefabricated element is tested for functionality and performance in the final inspection and is delivered to the customer after passing the test. As a semi-finished product, the infrared heating element on glass mesh fabric can be further processed by the customer, e.g. in connection with silicone, rubber or epoxy resin.

Aramid fibers are suitable for very demanding applications and they are widely used in the firefighting industry (manufacturing of firefighters’ clothing) because of their flame retardant properties. Aramid is not only fireproof, the aramid fibers also have a high tensile strength, which is why they are often used for bulletproof vests (military and police) or for armoring selected emergency vehicles. A special property of aramid nonwovens is its good thermal insulation. The laid heating wire creates a very high heat output, which is insulated by the nonwoven. Aramid has a high heat resistance, which is an enormous advantage since laying the heating wire generates a very high heat output which is further enhanced by the insulation provided by the aramid nonwoven carrier. In addition, the nonwoven is either not combustible or flame retardant and can be used for a temperature ranges of up to 200°C.

Base Heaters provide a direct heat to the underside of the vessel, and can help heat drums, cylinders, IBCs and even small pots of paint and mastic. They can be used on their own, or together with a side heater to boost heat-rates and ensure a full melt of solid products. FARATHERM Induction Base Heater - Provides heat to the base of steel or plastic 205L drums and smaller containers. May be used individually, or with other LMK Heating products Uses the same technology as the proven Thermosafe Induction Heater Suitable for use in Zone 1 & 2 rated hazardous areas (ATEX and IECEx Certified) DIGIHEAT Base Heater - Provides heat to the base of 210 litre drums and smaller containers. May be used on its own, or with other LMK Heating products. Digital indicating thermostat standard For more information contact LMK Thermosafe today. T: +44 (0)1440 707141 E: sales@drumheating.com

For everything from pipeline valves to 10,000L agro-chemical containers. LMK Thermosafe Ltd manufacture a wide range of drum and container heating products used in process industries world-wide, including Flexible Heating Jackets in a variety of sizes, materials, power levels and voltages. Custom size Flexible Heating Jacket The Flexible Heating Jackets are so versatile that they can be specifically tailored to fit a multitude of different containers suitable for virtually any size and specifications. This bespoke service offers ideal solutions for customers requiring non-standard containers to be heated as rapidly as possible and efficiently insulated. However big or small the application, our development team based at our UK headquarters can adapt tried and tested designs to produce the best results. A wide standard range is also available from stock to fit 25, 50, 100 or 205 litre drums as well as 1000 litre IBC containers, totes and gas cylinder applications.

A full range of accessories for all your drum and container heating needs. For more information contact LMK Thermosafe T: +44 (0)1440 707141 E: sales@drumheating.com

For fast, efficient and safe drum heating - a great replacement for old inefficient and expensive steam ovens. Fully ATEX, IECEx and ETL (NA) certified. MELTS SOLIDS ¤ HEATS LIQUIDS ¤ TOTALLY SAFE Designed to heat 205L drums or smaller steel vessels. THERMOSAFE® is a proven alternative to multi-drum ovens and the solution to a host of process heating problems, even in Hazardous Areas SIMPLE SAFE EFFICIENT FAST CLEAN FLEXIBLE MAINTENANCE FREE T: +44 (0)1440 707141 E: sales@drumheating.com

ProxATEX ATEX/IECEx Certified Temperature Controller – New Patented High Current Hazardous Area Controller This ATEX and IECEx certified controller is ideal for use with our Thermosafe, Faratherm or InteliHeat FlexiPlus products and other heating equipment installed in potentially explosive atmospheres. The device features Near Field Communication (NFC) which allows operators and site managers to set the key parameters of the device quickly and easily using pre-programmed cards. Simply hold the credit card sized NFC cards close to the front of the controller and the settings are instantly updated. This also makes the controller “Covid-secure”! BF400 Power Controller – Low cost solution for most installations Uniquely designed for use with the THERMOSAFE and FARATHERM Induction Heaters. Open loop control that is simple to install and use, ideal for most applications where a drum needs to be maintained at an operational temperature for a period of time.

Multiple sizes in stock, Custom designs also available. LMK Thermosafe are pleased to present their hazardous area range of heating jackets. These ATEX and IECEx Zone 1, 2, 21 and 22 rated jackets use a completely new and proprietary design. They are constructed with custom elastomer and silicone coated glass cloth materials and high density fibreglass insulation. Safe operating conditions are maintained even in the presence of potentially explosive gases and dusts. No transformers are required as they operate using standard ac supply voltages. InteliHeat Flexiplus jackets are ideal for gentle warming and to avoid winter freezing. For faster heating rates and melting solids at higher temperatures, the Thermosafe Induction Heater is normally recommended, but we can also offer more powerful custom jacketed solutions with digital jacket and wall-mounted controllers. The InteliHeat Flexiplus range is designed for use with plastic, stainless steel or magnetic steel drums.

Multiple stock sizes from 25L to 1000L, with custom designs also available. The Standard range - Ideal for gently heating and maintain a temperature up to approximately 40-45°C. The HiHeat range - Provides a boost in power for applications needing a faster heat-rate up to approximately 60-70°C. The High Power range - Maximum power and maximum insulation - 0-160° Thermostat available. For more information contact LMK Thermosafe today. T: +44 (0)1440 707141 E: sales@drumheating.com

Gufo HG gas fired heater is designed as an economic heating solution to be used in the winter gardens of restaurants, cafes, hotels and offices, smoking areas and terraces. Impact, moisture and wind resistant stainless steel chassis. Resistant to 1100 degrees and thermal shocks, having 98% heat conduction and aesthetic ceramic glass. With the low or high step burning system, the desired temperature comfort can be provided easily according to the temperature of the air. Built-in remote control for convenient and easy operation. Technical Features 1. Step Power 7 kW 2. Step Power 12,5 kW Heating Area 25-50 m² Natural Gas Consumption 1,3 m³/saat Recommend Hanging Height 2,2 m Natural Gas Pressure 20 - 55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V

Aluminum reflectors are used for high luminous efficiency. It provides many years of trouble-free operation without the need for special maintenance programs. For your safety, there is a safety system with a buzzer against a malfunction. Usage areas: Factories, Workplaces, Warehouses, Hangars, Service Stations, Mosques, Sanctuary, Farms, Outdoor and other places. TECHNICAL FEATURES Product Code - 1st Power - 2nd Power -NG Consumption -Hanging Height**(H) ECO L5 - 6 kW - 11 kW - 1,15 m³/saat - 2,5 m ECO L10 - 11 kW - 18 kW - 1,90 m³/saat. - 3,5 m ECO L14 - 16 kW - 26 kW - 2,73 m³/saat - 4,5 m ECO L18 - 20 kW - 32,1 kW - 3,37 m³/saat - 5,0 m Natural Gas Pressure 20-55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V

Gufo GT is especially suitable for awnings and parasols with its asymmetric design that increases heating efficiency to high points. Gufo GT provides economic with a high radiation capacity via natural gas operated working principle. It is designed as low capacity and lightweight for the spaces with limited hanging height. TECHNICAL FEATURES Product Code Gufo GT 2 Gufo GT 4 1. Step Power 2 kW 4 kW 2. Step Power 4 kW 8 kW Heating Area 4-8 m² 8-16 m² Natural Gas Consumption 0,42 m³/saat 0,84 m³/saat Recommended Hanging Height**(H) 2,0 m Natural Gas Pressure 20-55 mbar

Ultra – For greater energy efficiency The Ultra EC is now equipped with the most energy-efficient drive concept, through the use of EC technology, and can now be used wherever energy needs to be saved over the long term. How it works Air is drawn in through the axial fan and is blown through the circular heat exchanger into the room. The heated or cooled air is guided into the room on-demand through the pre(settable) louvre slats. Benefits —high-performance, energy-saving —suitable for low water temperatures —hygiene-certified to VDI 6022 Applications Buildings of all kinds, which need to be ideally heated and ventilated with centralised or decentralised control. Kampmann is completely modernising its unit heaters. We are responsibly taking a courageous step forwards and, from now on, will be relying systematically on EC technology to power and control our units. The reasons: — No wasted power — Minimum noise levels — ErP-compliant future

TOP C - for the first rays of summer — bring cool air into your warehouse on hot days with the TOP C — offer cooling as an option, even when your client only asks for hall heating — up to now a project-specific solution – the all-rounder now becomes a standard product Multifunctional The demand for cooling buildings is also continuing to increase in industrial climate control. In the system with chiller/heat pumps, the TOP C offers a simple solution for both: removing heating or cooling loads. Continuously variable control Control of TOP C is continuously variable with the cost-effective EC fans to supply the precise output actually required. This also means unnecessary sound emissions are avoided. Fast-reacting The most flexible climate control solution for storage, production, and sales. The fan support ensures fast-reacting heating and cooling of the hall.

TIP – Well-tempered air The solution for the optimum, centrally controlled heating and ventilation of buildings of all kinds. With a housing made of sendzimir galvanised sheet steel with threaded rods fitted as standard, TIP unit heaters are ideal for wall-mounting as well as ceiling-mounting. Functional principle Air is drawn in through the sheet metal sickle-blade silently-operating fan and is blown through the copper/aluminium heat exchanger into the room. The models with large heat exchange depth are ideal for use with low temperature operation. Benefits —Sickle-blade, whisper-quiet fan with optimised full nozzle —Easy to install —Unbeatable in terms of value for money Kampmann is completely modernising its unit heaters. We are responsibly taking a courageous step forwards and we will be relying systematically on EC technology to power and control our units. Reasons: — No wasted power — Minimum noise levels — ErP-compliant future

TOP – Temperature-adjusted air TOP unit heaters – “TOP” in terms o f price and performance – largely meet the demand for economical and controllable air handling. TOP unit heaters are all-purpose units that can be installed on the wall or ceiling. Operating principle Air is drawn in through the sickle-blade silentlyoperating fan and is blown through the heat exchanger into the room. The models with large heat exchanger capacity are ideal for use with low water temperatures. Applications Buildings of all kinds, which are to be ideally heated and ventilated with centralised or decentralised control. Kampmann is completely modernising its unit heaters. As the market leader in this segment, we are responsibly taking a courageous step forwards and, from now on, will be relying systematically on EC technology to power and control our units. There are good reasons for this: — No wasted power — Continuously variable control — Minimum noise levels — ErP-compliant future

!!!Not suitable for drying animal or vegetable products!!! VIBRATION DRYINGThe G-series dryer gently circulates your workpieces by means of vibration, together with the drying medium. The heated drying medium absorbs the moisture from your workpieces. In addition to drying your workpieces, the relative movement between them and the medium also has a polishing effect. PROTECTING YOUR SENSITIVE PARTS The bowl channel pitch is helically shaped and has no ramp, making the G dryer especially gentle when handling your workpieces. The high heating power is fully adjustable. The heater with replaceable heating elements is assembled separately from the vibrating section. To ensure your working environment is protected from dust, the dryer can also be fitted with a dust extractor.

CONTACTLESS DRYING BY MEANS OF HOT AIRThe BF-HL belt dryer allows you to dry your workpieces using hot air. This procedure is particularly beneficial when your workpieces have the following characteristics: Sensitive parts that must not come into contact with each other Parts with tight boreholes Long and bulky parts EFFICIENT DRYING IN THE TUNNEL Your workpieces are transported through a heated drying tunnel on a fine wire mesh belt, which is also available in premium V4A stainless steel. The temperature and speed of the conveyor belt are both fully adjustable. Special equipment includes a high-pressure air knife, which blows the residual water out of the workpieces prior to drying, as well as an extension of the conveyor belt to make placing and removing the workpieces easier.

SANHA stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can therefore be used not only in residential buildings, but also in industrial, commercial and public buildings.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

Electric infrared ceiling panels TEPLIY KVADRAT are low-temperature radiants for efficient heating of residential & office premises up to 4 m high. The system is based on principle of thermal infrared radiation. The advantage of transferring heat by radiation is the immediate effect of heating surfaces of objects that absorb heat from the panels, without preheating the air around them. Thus, all objects in the premises are heated, including floor, walls, furniture, equipment, etc. The heated objects emit heat secondary and give it to the air by means of convection. So, the system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room. TEPLIY KVADRAT panels are designed for comfortable and energy-efficient heating of any kinds of rooms, except rooms with high humidity. The panels can operate directly from the socket or standard thermostat-controller.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.