• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • ionisation equipment - air

Results for

Ionisation equipment - air - Import export

Netherlands

The Aerostat Sentry ionizing air blower neutralises static charges perfectly. The Sentry has been designed for areas where static electricity causes problems, ranging from dust and dirt attraction to uncomfortable electrical shocks to personnel. The Sentry is ideal for light industrial environments and it increases productivity. The Sentry is excellently suited to neutralise static charges on threedimensional objects, for instance injection moulded products. This ionizing air blower stands out for its compact design. It has an integrated fan which draws in the ambient air and blows the air off along the anti-static bars. The air inlet may be fitted with a special filter. The air volume can be adjusted electrically. The high-voltage power unit for the anti-static bars is also integrated. The anti-static bars are equipped with a (patented) cleaning system. The control knobs at the rear are easily reached and operated. Features - Working distance: 1000 mm max.

Request for a quote

Netherlands

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airkife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Airpressure sensor Each Typhoon system is supplied with an airpressure sensor wich can measure the air pressure inside the airknife. If the pressure drops under the required level, the system does not work optimal. A system check is then neccessary, often it appears that the air filter needs to be cleaned. Power unit A2A7M Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M.

Request for a quote

Netherlands

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Features Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning Direct-drive motors require little or no maintenance Anodised finish for corrosion protection Connection for pressure sensor New design extruded aluminium profile Cost efficient versus compressed air

Request for a quote

Netherlands

The Cleanflex Easy ionising air gun can be used for cleaning and neutralising surfaces. It’s unique features, not seen in any other ionising guns, make it very versatile to use. Ergonomic, hand or pull down, less air consumption, low noise, better blow-off force. - 24V DC input voltage and integrated ionisation power unit The Cleanflex Easy has a 24V input voltage, easily connect by a standardised M12 connector. No cumbersome high voltage cable and big transformer unit as seen in traditional ionisation guns. - Lightweight A Durable plastic housing and a well-constructed weight distribution make it a well balanced comfortable gun to use. - Ergonomic design The grip has been designed to suit women’s as well as man’s hands and has a soft grip and grip fixation making it very easy to hold without any muscle tension. - Full hand trigger (no RSI strain on one finger) The air flow is controlled with a full hand trigger, making operation very comfortable.

Request for a quote

Netherlands

This nozzle has been designed especially for neutralising and cleaning (small) bottles on the inside, etc. Ionisation takes place at the end of the tube from which the air is blown. The high-voltage point is not shockless. The tubes are available in two diameters and in a required length. Features - Working distance: 150 mm max. - Air consumption with 1/4” tube: 4 Nm3/h using 1 bar - Air consumption with 3/8” tube: 8,5 Nm3/h using 1 bar - Max. pressure: 6 bar - Shockless touchable emitter - Especially designed for neutralising and cleaning (small) bottles on the inside

Request for a quote

Netherlands

The Flat ionizing air nozzle is used to clean and neutralize electrostatically charged surfaces. The use of compressed air allows awkward places to be neutralized and cleaned as well. Connected to a Simco power unit, the ionizing air nozzles produce an air flow which is rich in positive and negative ions. When this air flow is pointed to an electrostatically charged area, electrons are exchanged until the area is neutralized. This makes that the material is neutralized during the blow-off process and prevents the blown-off particles from being re-attracted. The current of the Flat Nozzle is limited, so that the emitter point is safe to touch. The Flat Nozzle is especially suitable for neutralising at the feeding and delivery sections of machines in the printing industry. Features - Working distance: 50-300 mm - Air consumption: 5 Nm3/h using 1 bar - Max. pressure: 6 bar - Shockless touchable emitters

Request for a quote

Netherlands

The high voltage at both emitter points is current limited. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The nozzle blowoff force is high at a relatively low air consumption. Features - Working distance: 250 mm max. - Air consumption: 3,5 Nm3/h using 1 bar - Max. pressure: 7 bar - Shockless touchable emitters - Being installed outside the air flow, the emitter pins are hardly subject to fouling, if at all - Can be fitted on a standard air header - Click system for easy assembly

Request for a quote

Netherlands

The Cobra ionizing air gun is excellently suited for heavy-duty industrial applications. It has a lightweight durable gun body made of highimpact plastic. The airflow is controlled by the trigger. The air flow is amplified by a minimum factor of 6 : 1 by drawing in ambient air through the rear. The high-voltage point integrated aerodynamically in the gun body cleans itself during use. The gun comes standard with 6 metres of cable. Two guns at most can be connected to a single power unit. - Working distance: 600 mm max. - It comes standard with 6 metres cable, 12 metre is also possible - Ideal for heavy-duty industrial applications - The emitter pin is cleaned during use

Request for a quote

Netherlands

This gun is electrically safe and shockless. The emitter point is coupled capacitively to the high voltage. Thanks to its rugged design this gun is ideal for heavy-duty industrial applications. The airflow is controlled by the trigger. It comes standard with 3 metres of metalshielded cable. One or two guns can be connected to one power unit. Features - Working distance: 300 mm max. - It comes standard with 3 metres cable, 6 or 9 meter is also possible - Ideal for heavy-duty industrial applications

Request for a quote

Netherlands

Simco-Ion's Top Gun III is developed for light industrial applications. A high ion production attend to an optimal neutralisation of static charges. High blow-off force and low air consumption provide high-efficiency cleaning. A filter at the exit of the gun ensures that the air is clean. The gun body is lightweight and durable. It features a light-touch trigger, making it comfortable even for extended use. All functionality is built into the gun, including a flowcontrol valve, and a two-level LED which indicates if the gun is in ''stand by'' mode and if high voltage is currently active. Both the gun and cable are static dissipative. A hanger is provided for easy mounting. One gun can be connected to one power unit. Top Gun Side Kick The Top Gun Sidekick offers handsfree operation. A foot pedal controls both ionization and airflow. The Top Gun Side kick includes a flexible mount feature with a bracket for flexible positioning.

Request for a quote

Netherlands

The Airknife with Performax IQ Easy is especially useful for situations where the ionisation or cleaning needs to be mobile s.a. cleaning parts with a robot. With the 24V connection it is easy to install in such applications. The Airknife with Performax IQ Easy is standard available in 4 lenghts, 150, 310, 460 and 610 mm. Longer combinations on request. Features - Working distance: 3000 mm max - Removes dust and other contaminations and neutralises the static charge and prevents retraction contaminants - Installation possible on moving machine parts such as a robot arm - Shockless touchable emitters

Request for a quote

Netherlands

The BlowION ionising air blower has been designed for multifunctional applications. It features an ergonomic, robust designed extruded anodized aluminum housing. The integrated fans and the intelligent positioning of an anti-static bar and a high effective neutralising technique to provide long range ionization over a large area. The patented built-in cleaner brush maintains the ionisation production at optimum results by simply sliding from right to left. No external HV wiring is required as the power supply is incorporated (only line cord). The provided bolts warrant a simple installation and a quick Plug and Play of the unit. The BlowION is available in standard lengths from 520 mm effective length up to 1960 mm, in increments of 160 mm which covers most un- and rewinding applications. Features - Working distance: 1000 mm max. - Working width: 520 - 1960 mm - Integrated power unit - Plug and Play - Makes it possible to neutralise at distance on a large surface

Request for a quote

Netherlands

The HP-N-Ex ionizing air blower consists of a motor and a fan. The ambient air is drawn on one side and blown off along an anti-static bar. The effective ionizing width is 500 mm. This ionisation blower has been approved for use in certain explosion-hazardous environments. The power unit is integrated in the anti-static bar. - Working distance: 1500 mm max. - Working width: 500 mm - Approved for use in certain hazardous environments - Integrated power unit

Request for a quote

Netherlands

The VolumION is a very robust ionizing air blower with an effective ionising width of 500 mm. The VolumION consists of a motor, two fans and an ionisation unit. Ambient air is drawn on two sides and blown off along three anti-static bars. The air flow that is drawn in is adjustable on both sides. This ionising air blower is also ideal for long range neutralising when paper and film webs are being wound. The air inlets can be fitted with a special filter. Features - Working distance: 1500 mm max. - Working width: 500 mm - Ideal for long range neutralising when paper and film webs are being wound - Built-in shockless anti-static bars - The air inlets can be fitted with a special filter

Request for a quote

Germany

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our product portfolio for cleaning with ionized air you will discover systems and products for many industrial sectors. Static Combi Cleaner SCC is a highly effective ionizing blowing station for contact-free removal of undesirable dust and dirt deposits on three-dimensional or structured surfaces. Statically adhesive dust is discharged and blown off by pulsating air jets. Effective removal of electrostatic charges from the cleaned surface prevents fast re-contamination of the products. The Static Combi Cleaner is ideal for drying workpieces and tools.

Request for a quote

South Korea

Verified by Europages

<Product Specification> * Rated voltage : 220V~ , 60Hz (50Hz) * Power Consumption : 660W * Cooling capacity : 2,150W (17m2) * Dehumidifying Capacity : 1.2L / h * Temperature setting : 18~30℃ * Noise Level : ≤49dB (MAX) * Reservation time : 1~12hr * Drainage system : Self-evaporating system * Refrigerant : 410A * Compressor : SAMSUNG Compressor * Size : 330 x 277 x 855 mm * Weight : 21.8Kg (N.W) <Our Company> PASECO Paseco is a smart home appliance company that provides perfect products and the best services. We are a comprehensive home appliance brand that produces all home appliances necessary for living. https://www.paseco.com/

Request for a quote

South Korea

Verified by Europages

- Product name: Air Doctor air purifier - Model name: AC-10 - Manufacturer: APC TECH CO., Ltd / Korea - Air Cleaning Method : Axial Photocatalyst air cleaning technology - Color : Grey ,Red, Yeollow , Black - Size : 185mm*120mm - Weight: 0.95kg - Area for exclusive use: 3sq~5sq - Installation type : Stand type - uv lamp life : about 50000hours - Main Components : Axial Photocatalytic Reactor , composite filter (carbon+hepa) - Power consumtion: 3W - Operational Voltage: DC5V - Small air purifier / 0.92kg - Excellent performance by photoluminescent photocatalytic reactor (Patent No.10-09565105) - Patent (Small air purifier) / Patent No.10-1781119 - USB Port / Portable battery available

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Netherlands

Verified by Europages

Wholesale LG Air conditioners

Request for a quote

Turkey

Verified by Europages

With more than 35 years of air filtration experience, Mia Air offers you the latest filtration technology. Mia Air has been designed to provide fresh clean air by trapping 99.999 % of ultra-fine particles in the air. It has 11 m2 filtration area and 100 m2 effective room coverage. By using HEPA filtration, which traps extremely small particles, Mia Air can transform polluted air into clean air in seconds.

Request for a quote

Netherlands

Verified by Europages

ISCA Air Cooled Type Self Contained units with their compact, durable, robust and attractive cabinet fit any working environment such as dusty and corrosive. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.

Request for a quote

Netherlands

Verified by Europages

VM Medium Type Units are designed for medium-duty industrial applications such as process cranes, operator cabins, shelters, containers in metallurgy, oil&gas, cement, energy, automotive, mining and port industries. The main features and advantages of this product are; plug & play compact design, less needs for erection services. The cooling, fan only, heating function modes are available while the filtering is always operating.

Request for a quote

Netherlands

Verified by Europages

Air / Water Cooled HSC Series Water Cooling Industrial Chiller, Industrial Water Chiller, units are widely used in industrial plants such as steel and metallurgy, mining, cement, oil&gas, food, pharmaceutical, printing, machinery, energy, shipbuilding, marine, aviation, composite and defense industries.

Request for a quote

Netherlands

Verified by Europages

APU Series Air Pressurization Units & Filtration Units are widely used in industrial plants where needed such a precise air quality. These units are fully customizable upon the needs and the requirements of the projects. Absorbing residual dust, harmful gases and odors, APU Series are perfect to be used in such environments where human health is of high importance, as well as for equipment protection.

Request for a quote

Netherlands

Verified by Europages

IRA Air Cooled Type Rooftop units are designed to operate in harsh environmental outdoor conditions by its versatile, efficient and robust characteristics. These units can be used in steel and metallurgy, mining, cement, oil&gas, machinery, energy, marine and defense industries.

Request for a quote

Netherlands

Verified by Europages

ISW Water Cooled Type Split units are designed for the areas where there is no infrastructure for cooling solution. Split units consist of two parts as being indoor and outdoor, so these two parts are not affected from environmental conditions of each other’s. Thus the solution is optimized by necessary updates against to harsh environmental conditions such as dust, humidity, corrosive and high ambient temperatures.

Request for a quote

Netherlands

Verified by Europages

ISA Air Cooled Split Type units are designed for the areas where there is no infrastructure for cooling solution. ISA brings the full independency for the operation, doesn’t need for the resources of your premises except the electricity. Split units consist of two parts as being indoor and outdoor, so these two parts are not affected from environmental conditions of each other’s. Thus, the solution is optimized by necessary updates against too harsh environmental conditions such as dust, humidity, corrosive and high ambient temperatures.

Request for a quote

Spain

Verified by Europages

Industrial evaporative air conditioners with axial fan from 10,080 to 19,080 m3/h ECO COOLER evaporative coolers are a natural cooling system that provide cool, humid air in the room to be heated. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the indoor air comfort temperatures are reached. The necessary electrical power is 80% less than traditional air conditioning systems and by using water as a cooling element it avoids the emission of harmful gases into the environment. ECO COOLER evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow at all times, they also have an electronic control in charge of performing all the equipment′s functions.

Request for a quote

Spain

Verified by Europages

AD BIGGER PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. The AD BIGGER PREMIUM evaporative air conditioners, develop an air flow from 46,922 m3/h to 60,644 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 750m2 to 1,100m2. For larger surfaces more units can be installed.

Request for a quote

Netherlands

Verified by Europages

The cooler is made of stainless steel and the evaporator housing is insulated from PE and PUR. Exchangers and piping are coated against corrosion. The cooler is suitable for outdoor installation.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free