Laboratory containers - Import export

The draining rack is easy and flexible to set down on a table or working surface. Two large supports with wide bases ensure sufficient stability. Since both sides of the draining board can be used, it provides twice the hanging space. The collecting pan can simply be removed for emptying. The stable rods are individually placed into the holes of the draining rack and are clicked into place. Their positions can be changed at any time. Using a combination of rods of three different lengths (60 mm, 100 mm and extension to 150 mm), the draining rack can be adapted to any apparatus which is to be dried.

Shapely packing container with screw cap. Emptying without residues because there are no crevices, cost-effective.

“EST 1923 Savon de Marseille Olive Oil Soap, which is 50% olive oil, has been produced with 100% natural ingredients. The product, which is presented in 150 gram packages, has been created by hand using 100% herbal and traditional production methods suitable to the formula of the world-famous Marseille soap. The product that offers light wafts of honey and milk, caramel, creamy notes, and the freshness of vanilla creates a soothing spa effect in your bath. This product, which brings together honey and milk used for centuries to care for skin with “liquid gold” olive oil, cleans, nourishes, moisturizes, and refreshes your hands and skin without causing them to dry. Cleanses and softens the skin by protecting its natural balance. Can be used safely on all skin types. Dermatologically tested at internationally accredited laboratories. Does not contain paraben. Not tested on animals. On sale having been packaged in a stylish recycled kraft cardboard box.”

Natural Coconut Milk Shampoo has been certified with the V-LABEL given by the European Vegan and Vegetarian Association, proving that there is no animal content in its 600 ml formula, with the test results made in internationally accredited laboratories. With its formula containing 100% Natural Coconut Extract, it gives volume and fullness to your thin and weak hair. With Provitamin B5, it deeply penetrates your hair and hair follicles, repairs and helps thicken. Thanks to the coconut extract and natural actives in its formula, it preserves the natural moisture balance without weighing your hair down, helps to prevent splits and splits, and adds shine to your hair. With its special paraben-free formula, it is suitable for daily use for your weak and thin hair.

Maritime example : CONTENARISED project OBC-KSA : Total management of electrification, automatisation, video surveillance and soud system of four GUN SHOOTERS. Each one composed by one laboratory container, one plant container, one hydraulical container, one Air HP container. MANAGEMENT BACK DECK: Production of electrical and software studies, the assembly / cabinet wiring, and command desks and control. " More than 6 months of construction site, and assembly for putting into service in the first implementation in the North Sea ". MANAGEMENT GUN DECK: Winches regulation for synchronization, effort management, hydraulical engines, braking system.

Counting machine elmor C1: accessories and variants Conveyor bowls The parts to be counted with the elmor C1 counting machine are transported in a vibrating conveyor and are singularised by means of a sorting element. Both the conveyor bowl as well as the sorting element can be selected among different variants , depending on the properties of the product to be counted. A) Standard conveyor bowl made of anodised Aluminium with universal – sorting element FS0. FS0 is manually adjustable for all part sizes from 0.1 to 18 mm in diameter. B) Special sorting elements instead of FS0: FS1, manually adjustable, optimised for cereals, rice, paddy and products of similar shape and size FS2: manually adjustable, optimised for corn, soybeans, peas, beans and products with similar shape and size FS3: fine-drive adjustable in height and width, for very flat seeds or flat mechanical parts with the following dimensions: width: 0.5 to 10 mm, height: 0.5 – 8 mm, maximum length: 20 mm C) Special conveyor bowl with additional lateral opening for mechanically eliminating of accompanying substances, suitable for corn, cereals, soybean, paddy, etc. The height of this opening can be adjusted from 0 to 5 mm and allows unwanted accompanying substances laterally be sorted out. Not suitable for parts smaller than 1 mm in diameter. Can be used with sorting elements FS0, FS1, FS2, or FS3 combined. D) To meet the needs of various industries, the conveyor bowls can be made ​​of other materials . These bowls are for example extremely impact resistant or correspond to the rules of the FDA, etc. Such trays can be made ​​from various basic materials like Titanium, PEEK, Polyamide and others. E) The standard aluminum bowls can be treated or coated in order to satisfy specific requirements. With increased mechanical stress or when in contact with food, the surface can be hard anodized. A hard coating of nickel has a high surface hardness and is FDA approved, Polyurethane (PU) coating permits rapid transport of heavy mechanical parts and prevents noise and wear. Again, FDA approved materials can be used. F) Feeder Bowl with vertical outlet: Short cycle times are possible, as the seeds leave the bowl after a short run time. Advantageous when many different lots must be processed, often used for the fast 1000 grain weight measurement. Used for seeds which can be easily singularised like Crop, Soy, Corn, Canola etc. The seeds should have a diameter of 2 mm or more. Volume 0.8 litres, or about 2500 kernels of Corn. Dual Product Outlet The dual product outlet can increase the productivity in Preset Mode (= repetitive batch counting). Each time when a batch is counted, the outlet switches to the other side and the counter restarts automatically. The dual discharge chute is intended to be used for counting crop seeds or corn, which are filled directly into bags, but can also be used for other seeds with 1mm diameter or more. Automatic Seed Weight Sorter Each single seed of a lot is automatically placed on a scale. The Automatic Seed Weight Sorter measures the weight of each seed and compares it with one or several limits. According to the result of this comparison, the weighed seed is then transferred into two or more containers. So the parts can weighed and sorted either into good and bad parts or into several weight classes. Filling Carousel The C1 parts counter can be combined with the elmor 780 carousel filler. The carousel filler allows semi automatic, to a large extent unsupervised filling of vials, tubes, small containers as well as bags from paper, glassine or composite material. Filling adapter Adapter for small containers, bottles, laboratory tubes etc. This adapter allows dustfine and costly parts to be filled directly into containers. The C1 seed counter can be started only when a container is present.The filling adapters are manufactured individually on request. Dust Cover If specific small parts are processed, a dust cover can be of advantage. This is for example the case with pharmaceutical components, implants or with parts that need to be processed in a protective atmosphere. In this case, nitrogen or other gases or may be introduced through the dust cover. Ionizer When transporting small parts in the vibrating conveyor bowl there is a risk that the parts can become electrostatically charged. The correct separation of the charged parts becomes difficult. With an ionizer, the charged parts can be neutralised, shortly before leaving the bowl, in the region of the sorting element. The ionizer used in elmor C1 seed counter is manufactured by a specialized company, which is represented worldwide. The head of the ionizer is attached inside of a dust cover. Receipt Printer for Seed Counter elmor C1 The result of each completed count is printed automatically. The printing is done in plain text and bar code. During sample preparation or inventory counts many customers have expressed a wish to be able to print the determined number immediately. This can be done with this new accessories for the C1 counter. Faulty manual recordings are obsolete. Technical data: Paper: standard thermopaper rolls, 80mm width. Internal cutter, label length 64mm Barcode: Code 128 (International Standard ISO/IEC 15417), other codes on request Power supply: 100 – 240V, 50/60Hz The C1 seed counter must be equipped with an elmor printer interface board Feeding Conveyor elmor 610 Feeding conveyor and storage hopper for automatic refilling of the conveyor bowls of the counting machines elmor C1, C3 or CX Intermediate storage container of counted parts When a seed counter is combined with a packaging machine, it may be advantageous to add a container for synchronization therebetween. When the counting operation has finished and the packing machine is ready, a discharge flap is opened briefly, so that the content of the container is discharged into the packaging machine. Then the flap closes and the counting machine begins with a new operation. As a result, the waiting time that would be needed before a packaging machine is ready for the next lot can be greatly reduced, allowing a shorter cycle time. Depending on the task different volumes can be realized.

Reliable, accurate and offering superior senstivity, repeatability and speed of response. The SDT-Ex is suitable for continuous measurement of trace moisture in industrial process gases. This 3 wire, 4-20 mA, loop powered dewpoint transmitter utilises the ultra high capacitance SHAW moisture sensing technology and is certified intrinsically safe to ATEX and IECEx standards. Suitable for use in hazardous areas using a signal isolator and ideal for hydrocarbon, petrochemical and hydrogen applications. The SHAW SDT-Ex incorporates the unique AutoCal function designed by SHAW, allowing users to ensure accuracy between laboratory calibrations. Fully self-contained within a robust housing, the stainless steel construction provides weatherproof protection to IP66 (NEMA 4X). The output is configurable in 5 different units and various dewpoint ranges are available covering an overall range from -100 °C to +20 °C (-148 °F to +68 °F) dewpoint with an accuracy of ±2 °C (±3.6 °F) dewpoint.