Light tubes - Import export

Maximum use of natural solar lighting + Complementary self-dimming industrial Led lighting, working with individual Solar Tubes and Leds (Dual Diffuser) or single mirror integrating the Solar Diffuser and the Led in the same set (Full Diffuser). Chatron’s Uranus System consists of the Solar Tube and the self-dimming industrial Led, in order to provide light for 24 hours/day without the need for any additional lighting for the spaces where they are applied. These spaces can be factories, warehouses, pavilions, etc, and start to operate with minimum energy consumption. The great advantage of Chatron’s Uranus system is that it is able to efficiently illuminate the space, consuming the minimum amount of electrical energy for the purpose. This is possible because the Uranus system gives top priority to the natural lighting that comes from the Solar Pipes, complementing it by the led light only in the necessary quantity, to maintain the desired lighting level for the location.

Innovation in traditional SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE for day and night operation. The Kit SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE PERSA is designed to work during the day in the traditional way of capturing and introducing daylight into the space to be illuminated. Simultaneously during the daytime, the photovoltaic kit completely integrated into the SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE structure is carrying a small lithium battery that will illuminate at night. The Kit SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE includes: Photovoltaic Panel + Microelectronic PCBA + PCB Board Led + Lithium Battery + Remote Control. It combines modern solar transmission technology with the state-of-the-art LED technology, making it a breakthrough for traditional SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE and traditional lighting, enabling 24-hour room interior lighting to be energy-efficient and durable.

The best LED solution for growth Designed to replace existing fluorescents, great uniformity, also valid for vertical cultivation. The P24 spectrum gives maximum intensity at 450nm, improves vegetative growth. Promotes the primary and secondary metabolite in green leafy plants. With a balance of red light, essential for germination, root growth. The P11 spectrum maximizes red and blue light, with a balance of green light, encourages photosynthesis at all stages, from propagation to flowering. AGRO-T is an LED tube that allows us to optimally illuminate the spaces for germination, cloning and growth of green leafy plants, in controlled spaces where they can receive the nutrients that each plant needs to create an optimized microclimate.

Applications The led tube T8 is the ideal choice to replace conventional fluorescents, deleting the consumption generated by the ballasts, avoiding flicker and increasing energy savings and increasing durability.

1. Provides an air quality solution which can enjoy our lighting, at same time you can enjoy an air clean environment. 2. Eliminates harmful particles and microorganisms suspended in the air. 3. Negative ion emission demonstrates a sense of well-being by purifying the air and making the environment healthier

Superior Tube is committed to improving healthcare options for patients, and to helping surgeons save lives. As such, we manufacture a range of specialized welded and seamless tubing products for various areas of the medical device industry, including cardiac stents. Stents are small, expandable tubes, usually made of metal mesh, and are used to treat narrowed or weakened arteries. In patients with coronary heart disease, stents are implanted in order to open narrowed arteries during a procedure called percutaneous coronary intervention, or angioplasty. Heart stents can also help relieve chest pain and aid in the prevention of heart attacks. Ever since our tubing was used in the earliest cardiac stent implants in 1987, Superior Tube has been an industry leader in the manufacture of implant grade tubing for both coronary and peripheral stents. Please note that we have a minimum order value of £10,000.

Sun Tunnel - Chatron - Solar Light Tube - Light Tunnel - Sun Pipes - Daylight: They are ecological systems, where natural light is captured and directed through internally coated tube by highly reflective material, which minimizes the dispersion of the rays and allows a supply of light at considerable distances, without heat or cold transfer. Made with robust materials, are resistant to the most severe weather conditions. Studies indicate that an average of about 80% of working hours indoors can be performed with natural light, thus contributing directly to reducing energy consumption and consequently to improve the energy efficiency of buildings. Applications: Homes Offices Gyms Pavilions Factories Supermarkets Warehouses Industrial buildings Amphitheaters Room Centers Creative applications Advantages: Lighting capability supeior than a window Perfectly natural light No termic transfer (Cold and Heat)

The Wall Flat models allow a perfect installation of the Chatron Solar lIGHT Tube on facades of buildings, with the dome and diffuser inlaid without any kind of protrusions. These models also have the possibility of integration of LEDin system, allowing efficient lighting 24/h day. During daytime periods and with sun the lighting of the space is all coming from the sun. With the cloudy days or approaching the night, the “Light Controller” console introduces power to the LEDs, in order to keep constant the desired and selected Lux level for that location.

Heavy Floor Models The Heavy Floor models allow a perfect installation of the Chatron SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE on floors, getting the diffuser built-in without any kind of overhang. Structural accessory of walk to be cast or installed above the waterproofing. The Solar SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE are efficient systems, where natural light is captured and directed through internally coated tube by highly reflective material, which minimizes the dispersion of the rays and allows a supply of light at considerable distances, without heat or cold transfer. Made with robust materials, are resistant to the most severe weather conditions. Studies indicate an average of about 80% of working hours indoors can be performed with natural light, thus contributing directly to reducing energy consuption.

What is LEDin? It is the integration of Led lighting in solar tubes, allowing efficient lighting 24 hours a day. During daylight and sunny periods the illumination of the space comes from the sun. As night approaches or the day gets darker, Chatron’s “Light Controller” console introduces power to the LEDs to keep the desired and selected Lux ​​level constant for that location. MAXIMIZATION OF THE UTILIZATION OF NATURAL LIGHT + OPTIMIZATION OF EFFICIENCY IN LED LIGHTING During the day, SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE transport the natural light into the interior of spaces, keeping the environment with the quality that only Chatron SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE can accomplish. To achieve light during night periods or during cloudy periods, LED-IN Chatron system allows for each SUN PIPE – SUN TUNNEL -SOLAR LIGHT TUBE model to light spaces with the adequate power. Available options: Standard (On-Off) or Dimmable version are available.

hard plastic carry ase holds two cylinders, a regulator and tubing light and robust

The robust edge sanding machine - best suited for the edge area of large surfaces! Equipped with a height-adjustable bracket, the UNICO can be used both kneeling and standing. The low-maintenance and quiet running motor makes it a very reliable machine. The UNICO is the technically and ergonomically improved successor to the classic RANDMEISTER. Even areas with poor lighting conditions can be worked on more easily thanks to the very robust, integrated LED work light. The height-adjustable guide tube and the slewable bracket allow an individually adjustable working position and the sanding even when standing. The handle positioned on the attachment makes it easier to guide the machine. Applications with the UNICO: The UNICO is suitable for sanding wood and screed surfaces. The machine shows its strength, for example, when removing old, persistent layers of paint and lacquer.

Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness Other information Series 14040 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14240 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 14550 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 15050 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Serie 15250 Inner height hi: 86 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 14140 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 14340 Inner height hi: 62 mm Inner widths Bi: 50 - 400 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 14650 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 15150 Inner height hi: 80 mm Inner widths Bi: 50 - 600 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Serie 15350 Inner height hi: 86 mm Inner widths Bi: 50 - 400 mm bending radii R: 150 - 600 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series R18840 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R19050 Inner height hi: 70 mm Inner widths Bi: 50 - 600 mm bending radii R: 200 - 600 mm Pitch: 91 mm E-Tube, swivel lid Series R19850 Inner height hi: 80 mm Inner widths Bi: 75 - 462 mm bending radii R: 200 - 500 mm Pitch: 91 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E4/light New E4/light version with the proved and tested "tongue and groove" system of the Series E4/4 Low weight Optimized interior-exterior dimensions ratio Cost efficient Manifold interior separation potentials Large accessory kits Thin external links Max. travel distance: 150 - 400 m Typical industrial sectors and applications Machine tools (closed E4/light tubes and open E-Chain®) Material processing Stone cutting machines Woodworking machines General mechanical engineering Vehicles Construction machinery Limited application of long travels Special design Electrically conductive ESD/ATEX versions on request "Mounted on the side" unsupported application possible High torsionalstiffness

Further information Series E4.31L Internal height hi: 31mm Internal widths Bi: 40 - 300 mm Bending radii R: 055 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series E4.38L Inner height hi: 38mm Inner widths Bi: 50 - 400 mm Bending radii R: 063 - 350 mm Pitch: 56 mm E-Chain® with crossbars at every link Series E4.48L Inner height hi: 48 mm Inner widths Bi: 50 - 400 mm bending radii R: 075 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Serie R4.31L Internal height hi: 31mm Internal widths Bi: 50 - 300 mm Bending radii R: 075 - 250 mm Pitch: 46 mm e-tube, swivel lid Serie R4.38L Internal height hi: 38mm Internal widths Bi: 50 - 300 mm Bending radii R: 100 - 350 mm Pitch: 56 mm e-tube, swivel lid Serie R4.48L Inner height hi: 48 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 350 mm Pitch: 67 mm e-tube, swivel lid 41 dB(A) determined at the igus® laboratory, v = 1,8 m/s unsupported ESD classification: Electrically conductive ESD/Atex versions on request High torsion rigidity iF Design prize 2014 for R4.1 light energy tubes Further information Series E4.31L Internal height hi: 31mm Internal widths Bi: 40 - 300 mm Bending radii R: 055 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series E4.38L Inner height hi: 38mm Inner widths Bi: 50 - 400 mm Bending radii R: 063 - 350 mm Pitch: 56 mm E-Chain® with crossbars at every link Series E4.48L Inner height hi: 48 mm Inner widths Bi: 50 - 400 mm bending radii R: 075 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Serie R4.31L Internal height hi: 31mm Internal widths Bi: 50 - 300 mm Bending radii R: 075 - 250 mm Pitch: 46 mm e-tube, swivel lid Serie R4.38L Internal height hi: 38mm Internal widths Bi: 50 - 300 mm Bending radii R: 100 - 350 mm Pitch: 56 mm e-tube, swivel lid Serie R4.48L Inner height hi: 48 mm Inner widths Bi: 50 - 300 mm bending radii R: 100 - 350 mm Pitch: 67 mm e-tube, swivel lid Connecting two E4.1L chain segments Replacing E4.1 L chain links Extender crossbars E4.1 light E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Assembly instruction Joining, separating and opening of the E-Chain® and E-Tubes. Assembly instruction Application examples Applications in various industrial sectors and in the igus® test laboratory. E4.1 light E4.1 light e-chains® with 4-piece structure Less weight, enhanced dynamics possible. Snap-open crossbars on both sides Snap-open along the inner and outer radius Optimized interior-exterior dimensions ratio due to narrower outer links and optimized crossbar shape. Inner diameter completely accessible for easy filling. Unique side plate with tongue and groove system. Low-priced Short assembly time Typical industrial sectors and applications Low-priced alternative to E4.1 For unsupported applications When the ruggedness of the E2/000 is inadequate, but the E4.1 is oversized 41 dB(A) determined at the igus® laboratory, v = 1,8 m/s unsupported ESD classification: Electrically conductive ESD/Atex versions on request High torsion rigidity iF Design prize 2014 for R4.1 light energy tubes

Maximum energy savings with highly efficient solutions from Chatron CHT-DIM LED The industrial LED Chatron CHT-DIM allow maximum energy savings due to their high efficiency related to LEDs, drives and intelligent dimming system. The efficiency of chatron leds is 150 lumens / W, but this is only the beginning of the difference in maximizing efficiency. Another very important factor that distinguishes Chatron’s Industrial LEDs from all others on the market is the intelligent light probe incorporated in all LEDs, varying their power and therefore their energy savings, depending on the reading of the ambient light at every moment.

Maximum energy savings with highly efficient solutions from Chatron CHT-DIM LED. The industrial LED Chatron CHT-DIM allow maximum energy savings due to their high efficiency related to LEDs, drives and intelligent dimming system. The efficiency of chatron leds is 150 lumens / W, but this is only the beginning of the difference in maximizing efficiency. Another very important factor that distinguishes Chatron’s Industrial LEDs from all others on the market is the intelligent light probe incorporated in all LEDs, varying their power and therefore their energy savings, depending on the reading of the ambient light at every moment.

360 °light-emitting neon tube Provide basic lighting and decorative lighting

Tubing Light grey RAL 7035

Light Clamps – the clever plastic series: With the plastic tube connectors from the "Light Clamps" series, RK Rose+Krieger has developed a cost-effective and versatile range of tube connectors for the positive connection of tubes in the light load range. This design enables the clamping of the most various tube sections and –diameters. Besides their attractive design and the intelligent system of reducing bushes the clamping elements are characterised especially by their resistance to chemicals. They are particularly appropriate for sensitive applications under laboratory conditions and for industrial applications as, for instance, in the beverage or packing industry.

For use in peristaltic pumps to transport aggressive media, abrasive materials, highly viscous liquids and foodstuffs in practically all industrial fields. Construction: Tube in light or dark special qualities for abrasive media, liquids to max. 80°C (NR) for drinking water (IIR) for oils, petrol, fuels to max. 80°C (NBR) for aggressive media to max. 120°C (CSM) for chemical media (EPDM) FDA-approved food quality Special fabric inlays Interior smooth, exterior smooth polished SIMON – peristaltic pump hoses are manufactured with special fabric inlays developed specifically for the application. This guarantees harmonious flexing with permanently stable cross-sections. With the dynamically adjusted elastomers mixtures the result is lower overpressing with perfect tightness and low working temperatures. This achieves exceptionally long service life. These hoses are polished with abrasive tools in special alloys. This method guarantees a homogenous surface microstructure of the...

Special hose for use in steelworks, foundries and other applications with high ambient temperatures. With optional steel spiral very flexible and stable cross-section. Construction: Light or dark-coloured special tube Special fabric inlays Heatproof glass-fibre surround (to max. 500°C) or Heatproof silicate surround (to max. 1200°C) Optional: Concealed steel spiral Optional: Flame-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length. Other versions and dimensions on request.

For dairies and cheese manufacturers to handle milk or similar fatty products with and without spiral. As a spiral hose light and highly flexible to equip milk collection trucks. Construction: Light-coloured NBR tube Tension and pressure-resistant fabric inlays Optional: Concealed steel spiral Blue, abrasion-resistant, weather-resistant NBR cover Interior and exterior smooth, fabric patterned All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). *) Spiral hose version **) Milk collection truck version Sold by the roll or in fixed lengths with cuffed ends and/or widened hose endings. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

High-quality finish for the brewing and beverages industry. To transport beer, brewing yeast, unfermented wines, fruit juice, carbon dioxide and alcohols up to 96%. Construction: Light-coloured EPDM tube Tension and pressure resistant, highly elastic fabric inlays Optional: Concealed steel spiral Red, abrasion-resistant, weather-resistant EPDM cover Interior and exterior smooth, fabric patterned Suitable for CIP and conventional cleaning, brief steam cleaning up to 120°C All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). *) Spiral hose version Sold by the roll or in fixed lengths. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

High-quality finish for the beverage industry. To handle carbon dioxide, non-alcoholic and alcoholic beverages up to an alcohol content of 96%. Construction: Light-coloured special tube Tension and pressure resistant, highly elastic fabric inlays Optional: Concealed steel spiral Red, abrasion-resistant, weather-resistant cover Interior and exterior smooth, fabric patterned Suitable for CIP and conventional cleaning, brief steam cleaning up to 120°C All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). Sold by the roll or fixed lengths. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

The universal hose to handle fatty (especially animal and vegetable fats/oils) and non-fat foods. Also for conveying alcoholic and non-alcoholic beverages and fruit juices. Construction: Light-coloured NBR tube Tension and pressure-resistant fabric inlays Concealed steel spiral Blue abrasion-resistant, weather-resistant Optional: black, light or red cover Optional: Embedded copper wire Interior smooth, exterior fabric patterned Suitable for CIP and conventional cleaning, brief steam cleaning up to 130°C All food qualities used by SIMON meet the current requirements of the German Institute for Consumer health Protection and Veterinary Medicine (BfR) and the US Food & Drug Administration (FDA). Supplied by the roll or cut to length. Also available without spiral or in reinforced version to transport abrasive foodstuffs. SIMON food quality hoses are available with built in fittings using the SIMON – Vulkofix method on request. Other versions and dimensions on request.

This is the aluminium eyeliner tube product series which includes a wide range of refillable eyeliner tubes. This eyeliner tube is decorated with a light golden color on the aluminium layer. The makeup component is manufactured with aluminium and plastic together. The prominent features include trendy design, durable quality and reasonable price.

China Ming Xiao Mfg Custom Stainless Steel Components By CNC Turning, Milling, Boring, Tapping for world customers. Ming Xiao Mfg as a professional steel parts supplier from China Ningbo,we produce stainless steel parts,carbon steel parts,brass parts,aluminum parts & plastic parts for various indstries,especially pneumatic hydraulic parts, mechanical parts, furniture hardware parts, electrical & home appliance parts, construction use parts, vehicles parts, solar energy installation parts, lighting parts, etc. Such as tube coupling, hose coupling, shaft,Axis,pipe joint parts,hose connectors & transition connectors,copper machined tube, flange,bushing, Sleeve,knighthead,pedestal,Piston Rod,insert long pin, Dowel Pin,Drive Pin & Rod,ball head bolt,long rod machined parts,long thread tube parts,nonstandard thread bolt & nut,Extension Rod, etc. We custom Stainless Steel Components with high quality and low price,welcome contact us to discuss about your projects.

Custom Multihole Steel Parts By CNC Turning, Milling, Boring, Tapping. Ming Xiao Mfg as a professional steel parts supplier from China Ningbo,we produce stainless steel parts,carbon steel parts,brass parts,aluminum parts & plastic parts for various indstries,especially pneumatic hydraulic parts, mechanical parts, furniture hardware parts, electrical & home appliance parts, construction use parts, vehicles parts, solar energy installation parts, lighting parts, etc. Such as tube coupling, hose coupling, shaft,Axis,pipe joint parts,hose connectors & transition connectors,copper machined tube, flange,bushing, Sleeve,knighthead,pedestal,Piston Rod,insert long pin, Dowel Pin,Drive Pin & Rod,ball head bolt,long rod machined parts,long thread tube parts,nonstandard thread bolt & nut,Extension Rod, etc. We custom Multihole Steel Parts Machining, CNC turned & holes bored parts,welcome contact us to discuss about your projects.