Locks - Import export

Weight: 0,98 kg Height: 36 cm Width: 20 cm Material: 3 mm

Weight: 0,16 kg Height: 17 cm Width: 6 cm Material: 3 mm

Weight: 0,23 kg Height: 26 cm Width: 12,5 cm Material: 1 mm

19788 - 2,5x16,5 cm - 0,33 kg 19789 - 3x22,5 cm - 0,61 kg 19790 - 3x28,5 cm - 0,71 kg 19791 - 4x37 cm - 1,00 kg 19792 - 4x59 cm - 1,32 kg

Production of light metalwork such as railings, doors, and gates among others.

Weight: 1,00 kg Height : 21,5 cm Width : 41,5 cm Material: 6 mm

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000.

NSPV MCB lock dog It may be the easiest and the most common miniature circuit breaker lock for general use. This “switchover lock” is simply collared on the switchoverposition of the MCB. Features: Low cost; Prevent access to the Breaker during maintenance procedures; Extremely easy to install.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

A locking device is a mechanical component that prevents mated shafts and other machine elements from moving out of position when subjected to external forces. Operating conditions such as initial installation error, temperature changes, vibration, and others can all cause problems. These are critical components. Our locking devices consist of two interlocking conical rings used in the connection of power and motion transmission organs such as chain hoists, pulleys, sprockets, sprockets, timing gears, couplings, etc., without using wedges. It can transfer low pressure and high torque, and can be installed and disassembled quickly and safely. They are machine fasteners that strongly fix the shaft passing through them and the hubs passing around them by pushing each other in opposite directions by tightening the bolts on the piston rings.

PGK is a valve locking device made of polycarbonate and used to restrict access to the valves of taps supplying gas or water. The product consists of two parts that are installed on the tap. To attach the locking device, it is required to put the sealing rope through the special holes on the locking device. The process should be completed by installation of a rotary or latch seal which is securely fastened with a cable to the blocker and also prevents the chance to remove the locking device without any visible signs of damage to the seal. The is used to restrict access to the valves both in residential houses and at industrial sites. And the seal enables you to check whether there was an attempt to open the locking device with the intention to steal gas or water.

A set of mats is precisely matched to the car model and may contain locks to prevent it from moving.